User Panel
User Panel
User Panel
|
Posted: 5/27/2015 4:11:51 PM EDT
[#1]
Quote HistoryQuoted:
I had to use the spanner wrench every time I went to take the ASR mount off the can, I have yet to have it come loose on it's own. Matter of fact, I had it loosen the brake from the rife on my SCAR (must not have had the threads clean enough when I put on the Rocksett). Quote HistoryQuoted:
Quoted:
Quoted:
He probably wants your can.  Did you have any problems with the ASR mount staying tight on suppressor body when changing mounts? I have one pending and I was wondering about this? I had to use the spanner wrench every time I went to take the ASR mount off the can, I have yet to have it come loose on it's own. Matter of fact, I had it loosen the brake from the rife on my SCAR (must not have had the threads clean enough when I put on the Rocksett). I'm glad to see this. One of my hesitations for this suppressor is that back threading for the ASR and direct thread adapter. For 5.56 and 30 cal cans I prefer as few threaded joints as possible so there are fewer things to potentially come loose. |
|
|
|
Posted: 6/7/2015 7:58:39 PM EDT
[#2]
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!!
|
|
|
|
Posted: 6/7/2015 8:03:52 PM EDT
[#3]
Quote HistoryQuoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> What a tease... Fill us in! |
|
|
|
Posted: 6/7/2015 8:05:00 PM EDT
[#4]
|
|
|
|
Posted: 6/7/2015 8:16:24 PM EDT
[#5]
Quote HistoryQuoted:
What a tease... Fill us in! Quote HistoryQuoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> What a tease... Fill us in! No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! |
|
|
|
Posted: 6/7/2015 8:21:48 PM EDT
[#6]
Quote HistoryQuoted:
No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! Quote HistoryQuoted:
Quoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> What a tease... Fill us in! No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! Sweet...how do we order? |
|
|
|
Posted: 6/7/2015 8:28:51 PM EDT
[#7]
Quote HistoryQuoted:
Sweet...how do we order? Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> What a tease... Fill us in! No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! Sweet...how do we order? Tickle me interested. |
|
|
|
Posted: 6/7/2015 8:39:43 PM EDT
[#8]
Quote HistoryQuoted:
Tickle me interested. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> What a tease... Fill us in! No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! Sweet...how do we order? Tickle me interested. I'm in! 
Some video would be nice and how did you get that finish?????? |
|
|
|
Posted: 6/7/2015 8:41:29 PM EDT
[#9]
Quote HistoryQuoted:
No tease Brother, it's a adapter(s) I made to use the MAAD mount on the Omega. It works like a champ! Very cool. Thought you had your hands on some limited edition White Omega w/MAAD mount. Nice work. |
|
|
|
Posted: 6/7/2015 9:06:21 PM EDT
[#10]
+1 shut up & take my money
|
|
|
|
Posted: 6/7/2015 9:09:52 PM EDT
[#11]
Yep yep in for one!
|
|
|
|
Posted: 6/7/2015 9:20:21 PM EDT
[#12]
Quote HistoryQuoted: I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg |
|
|
|
Posted: 6/7/2015 9:49:07 PM EDT
[#13]
Quote HistoryQuoted:
What is the total weight with that setup. Also, are you the same guy on silencertalk that started a thread about them? Quote HistoryQuoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg I was just wondering about the weight and dimensions as well. |
|
|
|
Posted: 6/7/2015 10:09:12 PM EDT
[#14]
Quote HistoryQuoted: I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg Tag. |
|
|
|
Posted: 6/7/2015 10:23:23 PM EDT
[#15]
Quote HistoryQuoted:
What is the total weight with that setup. Also, are you the same guy on silencertalk that started a thread about them? Quote HistoryQuoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg Nope i'm not on silencertalk. Total length is 8.125" total weight is 1 lb - 0.9oz |
|
|
|
Posted: 6/7/2015 10:33:36 PM EDT
[#16]
Some video would be nice and how did you get that finish?????? I was going to get some video but i was the only one shooting while my buddy was running the CNC. The finish i accomplished by chucking it up on the lathe and sanding it with different grit sand paper. |
|
|
|
Posted: 6/7/2015 10:50:57 PM EDT
[#17]
Quote HistoryQuoted: Nope i'm not on silencertalk. Total length is 8.125" total weight is 1 lb - 0.9oz Quote HistoryQuoted: Quoted: Quoted: I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg Nope i'm not on silencertalk. Total length is 8.125" total weight is 1 lb - 0.9oz |
|
|
|
Posted: 6/7/2015 11:00:02 PM EDT
[#18]
Quote HistoryQuoted:
Oh, well someone else on Silencertalk was making one. They haven't updated their post in weeks so I'm not sure of the status. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg Nope i'm not on silencertalk. Total length is 8.125" total weight is 1 lb - 0.9oz Post the link if you can, I'm curious. Thanks |
|
|
|
Posted: 6/7/2015 11:06:20 PM EDT
[#19]
Quote HistoryQuoted:
Post the link if you can, I'm curious. Thanks Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg Nope i'm not on silencertalk. Total length is 8.125" total weight is 1 lb - 0.9oz Post the link if you can, I'm curious. Thanks I found the following link and I see it references your picture/instagram post: LINK |
|
|
|
Posted: 6/7/2015 11:09:45 PM EDT
[#20]
Ha cool they must have seen my instagram post.
|
|
|
|
Posted: 6/7/2015 11:17:07 PM EDT
[#21]
Quote HistoryQuoted: Ha cool they must have seen my instagram post. |
|
|
|
Posted: 6/8/2015 9:52:19 AM EDT
[#22]
Quote HistoryQuoted:
Haha, yep. I just realized they just posted a link to your instagram. My bad Quote HistoryQuoted:
Quoted:
Ha cool they must have seen my instagram post. No worries, it's more of my projects on there anyway. |
|
|
|
Posted: 6/8/2015 10:04:18 AM EDT
[#23]
Quote HistoryQuoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> That's sexy. |
|
|
|
Posted: 6/8/2015 7:31:26 PM EDT
[#24]
Quote HistoryQuoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> Definately would buy one right now... |
|
|
|
Posted: 6/8/2015 10:50:04 PM EDT
[#25]
How'd you get that finish?
|
|
|
|
Posted: 6/8/2015 11:33:52 PM EDT
[#26]
Quote HistoryQuoted:
How'd you get that finish? I am thinking a lathe and emery or scotch bright. You could use a peice of all thread and a couple washers and nuts chuck it in a drill and do the same thing too. 
|
|
|
|
Posted: 6/9/2015 8:16:57 AM EDT
[#27]
Quote HistoryQuoted:
How'd you get that finish? The front cap was a pain in the ass, under the black cerakote there is somekind of coating i'm guessing somekind of anodizing that is extremely hard to take off (i just took it off what you can see in the pic) I'm sure you can sand blast it off but i dint want to remove it where it counts. On the can itself i started at 230 grt on the lathe and worked my way to 1000 grt. |
|
|
|
Posted: 6/11/2015 6:22:00 PM EDT
[#28]
Quote HistoryQuoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> Yes please. You could sell a bunch of those here if you wanted to. |
|
|
|
Posted: 6/11/2015 7:17:28 PM EDT
[#29]
Quote HistoryQuoted:
Yes please. You could sell a bunch of those here if you wanted to. Quote HistoryQuoted:
Quoted:
I'll just leave this right here! Shot about 100 rounds and no loosening or problems. The Omega came off just like the Saker FTW!! <a href="http://s81.photobucket.com/user/anibal999r/media/IMG_2036.jpg.html" target="_blank">http://i81.photobucket.com/albums/j203/anibal999r/IMG_2036.jpg</a> Yes please. You could sell a bunch of those here if you wanted to. Yes Please |
|
|
|
Posted: 6/11/2015 8:11:58 PM EDT
[#30]
I'll say it again... You should make these..
Put me on the list! 
|
|
|
|
Posted: 6/11/2015 8:22:36 PM EDT
[#31]
Curious: how did you torque it on to the Omega without the wrench points on the suppressor body?
|
|
|
|
Posted: 6/11/2015 9:23:10 PM EDT
[#32]
Quote HistoryQuoted:
Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. |
|
|
|
Posted: 6/11/2015 9:24:02 PM EDT
[#33]
Quote HistoryQuoted:
I'll say it again... You should make these.. Put me on the list! I have 4 left
|
|
|
|
Posted: 6/11/2015 11:36:55 PM EDT
[#34]
Hope I'm still on the list. Depending on cost I may be in for two.
|
|
|
|
Posted: 6/12/2015 8:32:54 AM EDT
[#35]
JUST A HEADS UP...SELLING THROUGH IMs IS ONE OF THE FASTEST WAYS TO GET BANNED AROUND HERE. PLEASE TAKE IT TO THE EE.
|
|
|
|
Posted: 6/12/2015 9:18:28 AM EDT
[#36]
Quote HistoryQuoted: The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. Quote HistoryQuoted: Quoted: Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. |
|
|
|
Posted: 6/12/2015 9:31:56 AM EDT
[#37]
Quote HistoryQuoted:
So you can still only get it hand tight? Quote HistoryQuoted:
Quoted:
Quoted:
Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. The one in the picture did not have the spanner wrench cuts on it at the time. All adapters will have the same spanner wrench slots as all the Saker MAAD mounts and ASR mounts. |
|
|
|
Posted: 6/12/2015 3:56:46 PM EDT
[#38]
Quote HistoryQuoted: The one in the picture did not have the spanner wrench cuts on it at the time. All adapters will have the same spanner wrench slots as all the Saker MAAD mounts and ASR mounts. Quote HistoryQuoted: Quoted: Quoted: Quoted: Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. The one in the picture did not have the spanner wrench cuts on it at the time. All adapters will have the same spanner wrench slots as all the Saker MAAD mounts and ASR mounts. |
|
|
|
Posted: 6/12/2015 4:03:28 PM EDT
[#39]
Quote HistoryQuoted:
But still no way to hold the core. Maybe a small strap wrench... Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. The one in the picture did not have the spanner wrench cuts on it at the time. All adapters will have the same spanner wrench slots as all the Saker MAAD mounts and ASR mounts. Correct, i have leather jaws for my vise, i dont know why Sico didnt put notches on the can itself. and there's no meat do do it either. |
|
|
|
Posted: 6/12/2015 4:30:12 PM EDT
[#40]
Can you not grip the end cap at the same time and tighten both? When I had my F1 end caps and adapters done, I had the Saker notches milled into just those and not the tubes. I can twist from both ends if necessary.
|
|
|
|
Posted: 6/12/2015 4:31:26 PM EDT
[#41]
Quote HistoryQuoted:
But still no way to hold the core. Maybe a small strap wrench... Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
Curious: how did you torque it on to the Omega without the wrench points on the suppressor body? The one in the picture was prior to the cuts for the spanner wrench. The way I tightened mine was by hand tightening the adapter then the saker maad mount. I then used the spanner on the Saker maad mount to tighten everything up. The one in the picture did not have the spanner wrench cuts on it at the time. All adapters will have the same spanner wrench slots as all the Saker MAAD mounts and ASR mounts. I have just wrapped the can in welding gloves and clamped it in the vice length wise and have never had a problem. I do this to remove stuck end caps on my Sakers. |
|
|
|
Posted: 6/12/2015 4:34:27 PM EDT
[#42]
Quote HistoryQuoted:
Can you not grip the end cap at the same time and tighten both? When I had my F1 end caps and adapters done, I had the Saker notches milled into just those and not the tubes. I can twist from both ends if necessary. You can, but I like to distribute tension to the individual pieces so I can give the necessary amount. To me, then end cap doesn't need to be as tight as the rear mount. So using them against each other for tension isn't really an option to me. |
|
|
|
Posted: 6/13/2015 9:26:04 PM EDT
[#43]
Quote HistoryQuoted:
F3 went out of F4 went out? Individual or trust? Quote HistoryQuoted:
Quoted:
Ill have mine in December-Jan maybe???? 
Paper work went out today. F3 went out of F4 went out? Individual or trust? They're doing the transfer to the local shop frist, then the F4 will be done after that to my Trust. |
|
|
|
Posted: 6/29/2015 4:54:29 PM EDT
[#44]
Brought mine home today
|
|
|
|
Posted: 6/30/2015 11:34:12 AM EDT
[#45]
Quote HistoryQuoted: Now What to do! Saker or Omega??? I need to finish reading this thread. I hope its a good can man
how is yours working?Bishop3 |
|
|
|
Posted: 6/30/2015 7:42:48 PM EDT
[#46]
Have to get one for my .300 BLK SBR so....don't buy them all!
|
|
|
|
Posted: 7/1/2015 8:27:22 PM EDT
[#47]
Quote HistoryQuoted:
Brought mine home today
http://i882.photobucket.com/albums/ac21/mosesjg/Mobile%20Uploads/IMAG3300_zpsgcrcyi0m.jpg let us know how it goes when you get out there with it. Mini-Range Report if possible
|
|
|
|
Posted: 7/1/2015 10:28:00 PM EDT
[#48]
Quote HistoryQuoted:
let us know how it goes when you get out there with it. Mini-Range Report if possible Quote HistoryQuoted:
Quoted:
Brought mine home today
http://i882.photobucket.com/albums/ac21/mosesjg/Mobile%20Uploads/IMAG3300_zpsgcrcyi0m.jpg let us know how it goes when you get out there with it. Mini-Range Report if possible I'll be breaking it in Saturday. I'll have a chance to compare it to a friend's SDN6 too. If I'm able to I'll try and get video too but I'll give a report either way 
|
|
|
|
Posted: 7/1/2015 10:56:56 PM EDT
[#49]
Quote HistoryQuoted:
I'll be breaking it in Saturday. I'll have a chance to compare it to a friend's SDN6 too. If I'm able to I'll try and get video too but I'll give a report either way Quote HistoryQuoted:
Quoted:
Quoted:
Brought mine home today
http://i882.photobucket.com/albums/ac21/mosesjg/Mobile%20Uploads/IMAG3300_zpsgcrcyi0m.jpg let us know how it goes when you get out there with it. Mini-Range Report if possible I'll be breaking it in Saturday. I'll have a chance to compare it to a friend's SDN6 too. If I'm able to I'll try and get video too but I'll give a report either way word, thanks |
|
|
|
Posted: 7/2/2015 6:51:59 PM EDT
[#50]
So I got some spare time today and got to shoot with a friend. My 11.5 balanced really well with the Omega and didn't feel front heavy at all.
The tone sounded really good to me with the 556 endcap on it, along with making it pretty compact. I took a few shots with it without ear pro on and it's definitely manageable but it's not something I'll do regularly. Below is video of my friend shooting my Omega and his SDN-6 back to back. We agreed that the Omega was quieter at least to us. The only negative has more to do with me being left handed than the Omega itself. Every time I pulled the trigger I got a money shot of gas to the face which quickly got annoying. However when switching to shooting right handed it wasn't an issue at all. Needless to say I'll be getting an adjustable gas block, probably a SLR Rifleworks since they're on sale this weekend so anyone who owns them feel free to chime in. Omega 
SDN-6
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
