User Panel
User Panel
User Panel
|
Posted: 10/3/2016 2:01:43 PM EDT
A handgun thread on unmolestered guns makes me curious of what folks here have in the way of modified/custom built guns.
Some of my first are a 10/22 left with a stock bolt, receiver, and trigger housing. The 22/45 has fancy trigger parts, a comp, and extended controls.  20130927_132119 by Slick_Rick77, on Flickr
This is a PSL chopped to 21" and a Colt MT6601 chopped to 16."  20141202_115642 by Slick_Rick77, on Flickr
A rusty 1970's Remington 1100 cleaned up and suited to my purpose. 
Scoped out 67-5 wearing Packy's.  20151116_084317 by Slick_Rick77, on Flickr
Colt/Caspian 1991A1. Has the slide and a handful of small parts left over from the original.  20140723_111359 by Slick_Rick77, on Flickr
P89DC with ported match barrel and adjustable target sights. Perhaps not the wisest investment. 
AR builds. Pistol and firearm. 
15-22 set up to emulate a 14.5" middy/compact stock.  20160428_140655_Richtone(HDR) by Slick_Rick77, on Flickr
|
|
|
|
Posted: 10/3/2016 2:04:22 PM EDT
[#1]
This, until i finish the FPG and PDR...
|
|
|
|
Posted: 10/3/2016 10:12:36 PM EDT
[#2]
15" Mosin with pinned Saker 762 brake Installed McMillan flush cups Fully glass bedded Recoil pad Needs sights and a Timney trigger 
|
|
|
|
Posted: 10/3/2016 10:25:34 PM EDT
[#3]
Quote HistoryQuoted:
This, until i finish the FPG and PDR...  Bad ass.
|
|
|
|
Posted: 10/3/2016 10:37:08 PM EDT
[#4]
Quote HistoryQuoted: This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg Oh my! |
|
|
|
Posted: 10/7/2016 6:39:24 PM EDT
[#5]
Quote HistoryQuoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg Ok, I'll bite. What is that and what parts are used? |
|
|
|
Posted: 10/8/2016 9:23:50 AM EDT
[#6]
Quote HistoryQuoted:
Ok, I'll bite. What is that and what parts are used? Quote HistoryQuoted:
Quoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg Ok, I'll bite. What is that and what parts are used? http://www.ar15.com/forums/t_3_4/656717_.html&page=1&sr=0 http://www.ar15.com/forums/t_3_4/666635_Folding_DI_45_SBR__Round_2_.html |
|
|
|
Posted: 10/10/2016 11:36:55 PM EDT
[#7]
Quoted:
A handgun thread on unmolestered guns makes me curious of what folks here have in the way of modified/custom built guns. Some of my first are a 10/22 left with a stock bolt, receiver, and trigger housing. The 22/45 has fancy trigger parts, a comp, and extended controls. <a href="https://flic.kr/p/gcm2zw" target="_blank">https://c5.staticflickr.com/8/7459/9973740524_fc54a1cb72_c.jpg</a>20130927_132119 by Slick_Rick77, on Flickr This is a PSL chopped to 21" and a Colt MT6601 chopped to 16." <a href="https://flic.kr/p/pZiEuy" target="_blank">https://c1.staticflickr.com/8/7532/15744692328_62f4c65c1b_c.jpg</a>20141202_115642 by Slick_Rick77, on Flickr A rusty 1970's Remington 1100 cleaned up and suited to my purpose. http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_3486.jpg Scoped out 67-5 wearing Packy's. <a href="https://flic.kr/p/B6K8cW" target="_blank">https://c1.staticflickr.com/1/715/23037483416_1798cb7db5_c.jpg</a>20151116_084317 by Slick_Rick77, on Flickr Colt/Caspian 1991A1. Has the slide and a handful of small parts left over from the original. <a href="https://flic.kr/p/o9NpFj" target="_blank">https://c5.staticflickr.com/3/2905/14539435668_ed0df1d8f5_c.jpg</a>20140723_111359 by Slick_Rick77, on Flickr P89DC with ported match barrel and adjustable target sights. Perhaps not the wisest investment.
http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_2806.jpg AR builds. Pistol and firearm. https://farm4.staticflickr.com/3848/15003686870_967f2f6aea_b.jpg 15-22 set up to emulate a 14.5" middy/compact stock. <a href="https://flic.kr/p/GFwy8D" target="_blank">https://c4.staticflickr.com/2/1686/26701575515_071c9536ec_c.jpg</a>20160428_140655_Richtone(HDR) by Slick_Rick77, on Flickr bitch'in 10/22 OP |
|
|
|
Posted: 10/13/2016 9:06:13 AM EDT
[#8]
Quote HistoryQuote HistoryQuoted:
Quoted:
Quoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg Ok, I'll bite. What is that and what parts are used? http://www.ar15.com/forums/t_3_4/656717_.html&page=1&sr=0 http://www.ar15.com/forums/t_3_4/666635_Folding_DI_45_SBR__Round_2_.html That's pretty bad ass. Looks like it could make a decent movie prop gun. |
|
|
|
Posted: 10/13/2016 9:11:04 AM EDT
[#9]
Quote HistoryQuoted:
bitch'in 10/22 OP Quote HistoryQuoted:
Quoted:
A handgun thread on unmolestered guns makes me curious of what folks here have in the way of modified/custom built guns. Some of my first are a 10/22 left with a stock bolt, receiver, and trigger housing. The 22/45 has fancy trigger parts, a comp, and extended controls. <a href="https://flic.kr/p/gcm2zw" target="_blank">https://c5.staticflickr.com/8/7459/9973740524_fc54a1cb72_c.jpg</a>20130927_132119 by Slick_Rick77, on Flickr This is a PSL chopped to 21" and a Colt MT6601 chopped to 16." <a href="https://flic.kr/p/pZiEuy" target="_blank">https://c1.staticflickr.com/8/7532/15744692328_62f4c65c1b_c.jpg</a>20141202_115642 by Slick_Rick77, on Flickr A rusty 1970's Remington 1100 cleaned up and suited to my purpose. http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_3486.jpg Scoped out 67-5 wearing Packy's. <a href="https://flic.kr/p/B6K8cW" target="_blank">https://c1.staticflickr.com/1/715/23037483416_1798cb7db5_c.jpg</a>20151116_084317 by Slick_Rick77, on Flickr Colt/Caspian 1991A1. Has the slide and a handful of small parts left over from the original. <a href="https://flic.kr/p/o9NpFj" target="_blank">https://c5.staticflickr.com/3/2905/14539435668_ed0df1d8f5_c.jpg</a>20140723_111359 by Slick_Rick77, on Flickr P89DC with ported match barrel and adjustable target sights. Perhaps not the wisest investment.
http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_2806.jpg AR builds. Pistol and firearm. https://farm4.staticflickr.com/3848/15003686870_967f2f6aea_b.jpg 15-22 set up to emulate a 14.5" middy/compact stock. <a href="https://flic.kr/p/GFwy8D" target="_blank">https://c4.staticflickr.com/2/1686/26701575515_071c9536ec_c.jpg</a>20160428_140655_Richtone(HDR) by Slick_Rick77, on Flickr bitch'in 10/22 OP TY. Sadly it doesn't get used much anymore. It's so easy to shoot well it is a total bore. |
|
|
|
Posted: 10/13/2016 8:36:18 PM EDT
[#10]
 One of my "least" stock.  next project..... |
|
|
|
Posted: 10/14/2016 10:55:32 PM EDT
[#11]
Quoted:
A handgun thread on unmolestered guns makes me curious of what folks here have in the way of modified/custom built guns. Some of my first are a 10/22 left with a stock bolt, receiver, and trigger housing. The 22/45 has fancy trigger parts, a comp, and extended controls. <a href="https://flic.kr/p/gcm2zw" target="_blank">https://c5.staticflickr.com/8/7459/9973740524_fc54a1cb72_c.jpg</a>20130927_132119 by Slick_Rick77, on Flickr This is a PSL chopped to 21" and a Colt MT6601 chopped to 16." <a href="https://flic.kr/p/pZiEuy" target="_blank">https://c1.staticflickr.com/8/7532/15744692328_62f4c65c1b_c.jpg</a>20141202_115642 by Slick_Rick77, on Flickr A rusty 1970's Remington 1100 cleaned up and suited to my purpose. http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_3486.jpg Scoped out 67-5 wearing Packy's. <a href="https://flic.kr/p/B6K8cW" target="_blank">https://c1.staticflickr.com/1/715/23037483416_1798cb7db5_c.jpg</a>20151116_084317 by Slick_Rick77, on Flickr Colt/Caspian 1991A1. Has the slide and a handful of small parts left over from the original. <a href="https://flic.kr/p/o9NpFj" target="_blank">https://c5.staticflickr.com/3/2905/14539435668_ed0df1d8f5_c.jpg</a>20140723_111359 by Slick_Rick77, on Flickr P89DC with ported match barrel and adjustable target sights. Perhaps not the wisest investment.
http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_2806.jpg AR builds. Pistol and firearm. https://farm4.staticflickr.com/3848/15003686870_967f2f6aea_b.jpg 15-22 set up to emulate a 14.5" middy/compact stock. <a href="https://flic.kr/p/GFwy8D" target="_blank">https://c4.staticflickr.com/2/1686/26701575515_071c9536ec_c.jpg</a>20160428_140655_Richtone(HDR) by Slick_Rick77, on Flickr Delete |
|
|
|
Posted: 10/15/2016 3:48:41 PM EDT
[#12]
Quote HistoryQuoted:
Can't put a vertical grip on a pistol that's illegal. Quote HistoryQuoted:
Quoted:
A handgun thread on unmolestered guns makes me curious of what folks here have in the way of modified/custom built guns. Some of my first are a 10/22 left with a stock bolt, receiver, and trigger housing. The 22/45 has fancy trigger parts, a comp, and extended controls. <a href="https://flic.kr/p/gcm2zw" target="_blank">https://c5.staticflickr.com/8/7459/9973740524_fc54a1cb72_c.jpg</a>20130927_132119 by Slick_Rick77, on Flickr This is a PSL chopped to 21" and a Colt MT6601 chopped to 16." <a href="https://flic.kr/p/pZiEuy" target="_blank">https://c1.staticflickr.com/8/7532/15744692328_62f4c65c1b_c.jpg</a>20141202_115642 by Slick_Rick77, on Flickr A rusty 1970's Remington 1100 cleaned up and suited to my purpose. http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_3486.jpg Scoped out 67-5 wearing Packy's. <a href="https://flic.kr/p/B6K8cW" target="_blank">https://c1.staticflickr.com/1/715/23037483416_1798cb7db5_c.jpg</a>20151116_084317 by Slick_Rick77, on Flickr Colt/Caspian 1991A1. Has the slide and a handful of small parts left over from the original. <a href="https://flic.kr/p/o9NpFj" target="_blank">https://c5.staticflickr.com/3/2905/14539435668_ed0df1d8f5_c.jpg</a>20140723_111359 by Slick_Rick77, on Flickr P89DC with ported match barrel and adjustable target sights. Perhaps not the wisest investment.
http://i164.photobucket.com/albums/u40/Ricky_a_photos/IMG_2806.jpg AR builds. Pistol and firearm. https://farm4.staticflickr.com/3848/15003686870_967f2f6aea_b.jpg 15-22 set up to emulate a 14.5" middy/compact stock. <a href="https://flic.kr/p/GFwy8D" target="_blank">https://c4.staticflickr.com/2/1686/26701575515_071c9536ec_c.jpg</a>20160428_140655_Richtone(HDR) by Slick_Rick77, on Flickr Can't put a vertical grip on a pistol that's illegal. The pistol has an AFG. The firearm is pretty much defined by the VFG. |
|
|
|
Posted: 10/15/2016 3:52:45 PM EDT
[#13]
Delete |
|
|
|
Posted: 10/15/2016 7:36:38 PM EDT
[#14]
Quote HistoryQuoted:
Yeah I'm not talking about the afg. It redefines it alright. If it's over 26" overall, the pistol grip does not make it an AOW like you seen to think. There are tech letters stating such. |
|
|
|
Posted: 10/16/2016 12:16:42 AM EDT
[#15]
Quote HistoryQuoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg Oh wow that's cool. |
|
|
|
Posted: 10/16/2016 4:15:16 AM EDT
[#16]
Quote HistoryQuoted:
If it's over 26" overall, the pistol grip does not make it an AOW like you seen to think. There are tech letters stating such. Quote HistoryQuoted:
Quoted:
Yeah I'm not talking about the afg. It redefines it alright. If it's over 26" overall, the pistol grip does not make it an AOW like you seen to think. There are tech letters stating such. Oh I didn't know that. My apologies. Sweet collection you got there. I went with the Noveske rail covers on mine. 
|
|
|
|
Posted: 10/17/2016 8:54:49 PM EDT
[#18]
Quote HistoryQuoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg just read the build threads, amazing work ! who makes those iron sights? i've got a couple rifles that i think they'd look great on :) |
|
|
|
Posted: 10/18/2016 1:14:11 AM EDT
[#19]
Quote HistoryQuoted:
just read the build threads, amazing work ! who makes those iron sights? i've got a couple rifles that i think they'd look great on :) Quote HistoryQuoted:
Quoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg just read the build threads, amazing work ! who makes those iron sights? i've got a couple rifles that i think they'd look great on :) Chaos USA, they're for the Saiga 12 and have no real vertical adjustability other than selecting the right orifice. I welded up the front post and filed it down for the initial zero.
They also bolt down instead of clamp to the rail. 
You might like a set of the Scorpion EVO / Bren sights (not the big bead, cheap LPA version) 
|
|
|
|
Posted: 10/18/2016 1:44:24 AM EDT
[#20]
Just realized this isn't GD
|
|
|
|
Posted: 10/18/2016 2:10:25 AM EDT
[#21]
I guess technically my h&k sl8 that I turned into a g36c. Only thing "stock" is the receiver but even that had to get milled.
|
|
|
|
Posted: 10/18/2016 8:56:23 AM EDT
[#22]
Quote HistoryQuoted: http://i16.photobucket.com/albums/b13/armoredman/527/527%20with%2010%20round%20mag_zpspcddn92d.jpg CZ 527M in 7.62x39mm, One of a kind custom stock with AK pistol grip and spare 5 round mag holder in the butt, rifle is bedded and pillared. Customized Marbles adjustable rear iron sight. One of a kind custom made 10 round magazine - 20 rounder in testing.  I know, the mag is ugly but it is absolutely flawless in operation. Rifle is my walking in the woods rifle, called the CSR, for Camp/Scout Rifle. No scope - never could get the Redfield Revolution 2-7 I wanted, out of stock when I had money, found everywhere when I am broke, so I learned to love iron sights. |
|
|
|
Posted: 10/18/2016 2:16:07 PM EDT
[#23]
Quote HistoryQuoted:
Chaos USA, they're for the Saiga 12 and have no real vertical adjustability other than selecting the right orifice. I welded up the front post and filed it down for the initial zero.
They also bolt down instead of clamp to the rail. https://cdn.shopify.com/s/files/1/1265/8331/products/CHAOS_SIGHTS.jpeg?v=1471906772 You might like a set of the Scorpion EVO / Bren sights (not the big bead, cheap LPA version) https://shop.cz-usa.com/images/items/FullSize/19370.png Quote HistoryQuoted:
Quoted:
Quoted:
This, until i finish the FPG and PDR... http://i241.photobucket.com/albums/ff206/devtucker/AR-45/IMG_20160922_202657819.jpg just read the build threads, amazing work ! who makes those iron sights? i've got a couple rifles that i think they'd look great on :) Chaos USA, they're for the Saiga 12 and have no real vertical adjustability other than selecting the right orifice. I welded up the front post and filed it down for the initial zero.
They also bolt down instead of clamp to the rail. https://cdn.shopify.com/s/files/1/1265/8331/products/CHAOS_SIGHTS.jpeg?v=1471906772 You might like a set of the Scorpion EVO / Bren sights (not the big bead, cheap LPA version) https://shop.cz-usa.com/images/items/FullSize/19370.png ah, thank you for the info ! I've got a set of the CZ sights i took off my scorpion (my eotech is 100% reliable... right? except when it's cold or hot or the batteries shit themselves in the tubes) i really dig the hk style diopter sights, something about the look just screams... diehard? i'm really impressed with all your work on that gun, i couldn't imagine trying to fab that myself, i wouldn't even know where to start |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
