User Panel
Agree. If you need more than 120 rounds as a civilian you are in trouble.
|
|
callmenoshie: "saying that females have the potential to be "bat shit crazy" is like saying the sky has the potential to be blue."
XCRmonger: "I've seen German Shit Porn that was sexier." |
Some sweet setups in here.
|
|
|
Originally Posted By Will816: I looked up my invoice from SKD for the Banshee, I bought it in 2012 and paid like $120 or so Even being ten years old, I think I'll be able to make a small profit off of it View Quote View All Quotes View All Quotes Originally Posted By Will816: Originally Posted By Seiran: Hello fellow Banshee 1.0 owner Not many of us around. I looked up my invoice from SKD for the Banshee, I bought it in 2012 and paid like $120 or so Even being ten years old, I think I'll be able to make a small profit off of it Only reason I upgraded was to lighten things up some (new plates, etc as well) and switch to MC from coyote. Sold my whole Banshee set up to a buddy for basically what I had into it (PC, Esstac mag pouches, IFAK, etc), years later. |
|
|
Originally Posted By coltons21: How are you liking your KAC NT4 SUPPRESSOR? I have one in Taupe and love the tone of it. View Quote View All Quotes View All Quotes Originally Posted By coltons21: Originally Posted By S-1: Swimmers Cut JPC 2.0 with L210's. Added the SKD MK1's and First Spear plate backers at the recommendation of board members. Very comforfortable and minimalist like I wanted it. Also added the MC IR flag. https://www.ar15.com/media/mediaFiles/24782/20210721_011819_jpg-2022275.JPG How are you liking your KAC NT4 SUPPRESSOR? I have one in Taupe and love the tone of it. I've had it for 10+years. It sounds better than the Surfires back then and still gets compliments. The NT4 is a beast. It may weigh 6oz more than the latest and greatest but it holds up to to the obuse. I always get compliments on its "tone" which I mention a lot. |
|
|
DBL TAP...
Anyone who discounts th NT4 is a clown. The Suppressors can hold up to tons of abuse. Plus, they sound better than most. Period. |
|
|
Originally Posted By slappomatt: Agree. If you need more than 120 rounds as a civilian you are in trouble. View Quote Or more practice lol. I have 150. 1 in the gun, 1 one the belt, 3 on my plate carrier. Let's say a small group puts you in a bad situation (5 people), If you blow through 120 rounds.... yikes. Either use rounds to cover your escape, or put down bad guys. High group counts of 10 people or more.... well maybe you stumbled into a blm rally and should not have been there in the first place. NFAC? Same story, stay home. Patrolling stateside? Keep more ammo in the vehicle and replenish your carrier as necessary. *This is only my thought process and opinion. I am already a bigger person and do not want to carry a ton of shit. |
|
Just buy it. You know you want to.
|
Familiarity and prolonged exposure without incident leads to a loss of appreciation of risk.
|
Originally Posted By ecgRN: Wear your kit while doing shit. You might be surprised. https://www.ar15.com/media/mediaFiles/21318/6111b9f65d14f901340666-2046691.png View Quote I'm just proud of you for ditching that heavy fucker you used to post. I wear mine when I mow the lawn, and at the gym some times... |
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake" SSgt Jason A Decker. 11/6/09 |
Yeah that was a pig. Lol.
Don't wanna be "that guy" that gets gassed at an $800 class. Training. Bigly. Mow like you fight. |
|
Familiarity and prolonged exposure without incident leads to a loss of appreciation of risk.
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake" SSgt Jason A Decker. 11/6/09 |
Information for my Banshee boys - Later this week Shellback Tactical is releasing a new tube system cummerbund.
|
|
If I had to be stranded in an island for a long time with a male arfcommer it'd be eesmith. I'm not gay, but I do get lonely. - Kalahnikid
tnsparky Medikeighted EdwardAvila Rest In Peace, Brothers. |
It will actually be 160 rounds total. I think, for a guy north of half a century and not exactly in shape, probably more than I can use. Still happy to have it. Kangaroo pouch works great and North American Rescue Mini IFK left side. All I have to do is order another set of shoulder pads - I lost one during the emergency move last month.
Attached File |
|
|
Old one redone for best friend with the 2 mag panel I pulled off the other one. CAT tourniquet and ersatz medical kit until I can buy another Mini IFK. Only doubled up IIIA soft armor inside but better than bare skin. I ha e no idea where the side panels disappeared to, but the buckles should hold it in emergency use until Incan locate another cummerbund setup.
Attached File Edit to add - mags reversed now. Whoops. |
|
|
does anyone make a velcro admin pouch? Its the last thing I want to add to my LEPC and my only means to attach is velcro
ETA looks like spiritus makes basically what am after. Bring money... https://www.spiritussystems.com/microbat-systems-candy-mid-pouch-v3/ |
|
callmenoshie: "saying that females have the potential to be "bat shit crazy" is like saying the sky has the potential to be blue."
XCRmonger: "I've seen German Shit Porn that was sexier." |
http://nesworkshop.com/product/admin-pouch-multicam-jpc-cpc-avs-njpc-nespc-utility-first-aid-velcro-nesworkshop/
This May Be an alternative. |
|
|
callmenoshie: "saying that females have the potential to be "bat shit crazy" is like saying the sky has the potential to be blue."
XCRmonger: "I've seen German Shit Porn that was sexier." |
Originally Posted By sp1shooter: @Tuukka Inquiring poor minds want to know. View Quote Sorry for the late reply, I could not find the First Spear Tubes separately so after a bit of looking went with these: Tan ROC 80 buckles Been working fine, just shot the Finnish military reserve 3-gun nationals with the carrier + other gear on. Was 5th/51 shooters in the gear class and 17th/178 shooters overall ( fudged up a couple of shotgun stages and some other not so good performances , easy chance to be in the medals and higher also in overall ) Some footage here: https://www.instagram.com/tuukkajokinen/?hl=fi |
|
|
Well done, sir!
|
|
|
|
Originally Posted By Tuukka: Sorry for the late reply, I could not find the First Spear Tubes separately so after a bit of looking went with these: Tan ROC 80 buckles Been working fine, just shot the Finnish military reserve 3-gun nationals with the carrier + other gear on. https://i.imgur.com/zGlQ6Ud.jpg Was 5th/51 shooters in the gear class and 17th/178 shooters overall ( fudged up a couple of shotgun stages and some other not so good performances , easy chance to be in the medals and higher also in overall ) Some footage here: https://www.instagram.com/tuukkajokinen/?hl=fi View Quote Nice work in the match! How did you attach those buckles? Sew them in? It seems like the least expensive route for tubes is about 80-90 dollars. If you’re paying someone to modify a carrier with those, seems like it would be the same. I’m curioushow these work. |
|
|
Originally Posted By Tuukka: Made simple hook/loop sandwiches, sewn by hand, so yes pretty cheap. https://i.imgur.com/W2No2OH.jpg The lower buckle is for the Velocity 24H pack strap, that I have rigged with G hooks on the front of the carrier. https://i.imgur.com/xcvrSK8.jpg View Quote Thank you. That seems possible. |
|
|
Is this s good place to post this
http://ogsurplus-com.3dcartstores.com/Body-Armor_c_21.html I’m grouchy but not related to this guy |
|
|
Familiarity and prolonged exposure without incident leads to a loss of appreciation of risk.
|
My JPC 2.0 is hopefully about to get a major upgrade. Going to play around with some pieces and see if I can turn my dream into a reality.
Attached File |
|
There are no coincidences
|
Goal:
QD, Lightweight and Streamlined. Convert JP 2.0 to a Tubes skeletonized cummerbund while eliminating the thick double-sided Velcro panel that anchors the male side of the Tubes buckle. Components: Spiritus Molle Tubes Cummerbund Shaw Concepts ARC Placard V2 Shaw Concepts 556 Triple Insert FirstSpear Tubes Field Repair Kit (purchased through Shaw Concepts) Here is the piece (2) that I want to get rid of: Attached File Spiritus Cummerbund installed: Attached File Tubes Field Repair Kit installed on the built-in loops on the SC Placard and placard swift-clipped into JPC 2.0: Attached File Attached File Good to go! Attached File With Hesco 3810 plates installed. Attached File |
|
There are no coincidences
|
Note the TQ sleeve at the bottom and the elastic loops on the sides of the placard. Shaw Concepts put some through into this.
Attached File Are you thinking what I'm thinking? @Esstac- Attached File |
|
There are no coincidences
|
Sweet setup
Originally Posted By PFran42: Goal: QD, Lightweight and Streamlined. Convert JP 2.0 to a Tubes skeletonized cummerbund while eliminating the thick double-sided Velcro panel that anchors the male side of the Tubes buckle. Components: Spiritus Molle Tubes Cummerbund Shaw Concepts ARC Placard V2 Shaw Concepts 556 Triple Insert FirstSpear Tubes Field Repair Kit (purchased through Shaw Concepts) Here is the piece (2) that I want to get rid of: https://www.ar15.com/media/mediaFiles/309598/PXL_20210820_224838755_jpg-2059959.JPG Spiritus Cummerbund installed: https://www.ar15.com/media/mediaFiles/309598/PXL_20210820_222452582_jpg-2059962.JPG Tubes Field Repair Kit installed on the built-in loops on the SC Placard and placard swift-clipped into JPC 2.0: https://www.ar15.com/media/mediaFiles/309598/PXL_20210820_222914751_jpg-2059967.JPG https://www.ar15.com/media/mediaFiles/309598/PXL_20210820_223335544_jpg-2059966.JPG Good to go! https://www.ar15.com/media/mediaFiles/309598/PXL_20210820_223726584_jpg-2059970.JPG View Quote |
|
[NO TEXT]
|
M81 Arc carrier from Shaw concepts
Attached File M81 Spiritus carrier Attached File This is just the carriers I have. Ive got piles of M81 everything else |
|
|
While most of my kit is some variation of ODG for being a low(er) profile color/pattern, these full M81 builds are fantastic.
|
|
|
Originally Posted By DeuceGoon: M81 Arc carrier from Shaw concepts https://www.ar15.com/media/mediaFiles/511961/ARC_jpeg-2060320.JPG M81 Spiritus carrier https://www.ar15.com/media/mediaFiles/511961/Spiritus_jpeg-2060321.JPG This is just the carriers I have. Ive got piles of M81 everything else View Quote @DeuceGoon Could you give us a mini review of the ARC carrier? I've looked and there is hardly anything out there. |
|
There are no coincidences
|
|
|
Originally Posted By DeuceGoon: M81 Arc carrier from Shaw concepts https://www.ar15.com/media/mediaFiles/511961/ARC_jpeg-2060320.JPG M81 Spiritus carrier https://www.ar15.com/media/mediaFiles/511961/Spiritus_jpeg-2060321.JPG This is just the carriers I have. Ive got piles of M81 everything else View Quote I like the Blackbeard patch. Where’d you get it? |
|
|
|
Originally Posted By sconnieVLP: Not as sexy as some of the stuff out today, but I haven’t found anything that works better than my 6094. https://www.ar15.com/media/mediaFiles/338594/4CA44AF3-1AC2-48EC-A5D3-1F7061585BC4-2061014.jpg View Quote Agreed... Nothing I have tried matches the comfort. I like it so much, I'm about to unload the JPC 2.0 project and work on optimizing my 6094A for placard use. I'm wanting a placard for M4 mags and one for my MPX setup. Too late to turn back now... Attached File |
|
There are no coincidences
|
Originally Posted By PFran42: Agreed... Nothing I have tried matches the comfort. I like it so much, I'm about to unload the JPC 2.0 project and work on optimizing my 6094A for placard use. I'm wanting a placard for M4 mags and one my MPX setup. Too late to turn back now... https://www.ar15.com/media/mediaFiles/309598/PXL_20210822_150739108_jpg-2061979.JPG View Quote 6094 was the first plate carrier I was ever issued, and I’ve also been issued the JPC 1.0 and 2.0. Not a big fan of either version. I’ll stick with the 6094 until it falls apart. |
|
|
The proof of concept front flap delete on my LBT-6094A went better than expected. I carefully cut the seams and nothing on the carrier was cut or torn. Found a High Ground Gear triple mag shingle insert and some KYWI inserts in one of my parts bins and mated it up with the Shaw Concepts ARC Placard V2.
Attached File Attached File Attached File I didn't have a Swiftclip adapter for the 6094 so I temporarily rigged up some Velcro OneWrap to a couple of ITW QASMs and threw everything together. Removing the front flap (5 layers of material) on the PC really slimmed it up. Attached File Now that I know this will work, I went ahead and ordered a MSM QASM VERTICAL ATTACHMENT KIT and a Shaw Concepts Elastic 556 Placard V2. This will take care of my 5.56 needs. For my MPX setup, I'll use the Shaw Concepts ARC Placard V2 and a Spiritus Submachine Gun Magazine Insert. |
|
There are no coincidences
|
Dildos don't even make me raise an eyebrow anymore... you've got to have something a whole lot weirder than that in your rectum if you want to impress me. - TheGrayMan
|
Originally Posted By joker581: Finally upgrading from my bulky, heavy Eagle SPC to the JPC. They sent a black Multicam one instead of the black that I ordered but I kind of like it. https://www.ar15.com/media/mediaFiles/26464/65B83AF5-D259-41D1-9677-FB66EF929991-2066795.jpg View Quote If I get around to setting up another carrier, black multicam is sweet. I've already got OD green. |
|
Your life matters just as much as mine, it is up to you, what you do with your time.
|
Deodon ASS from Esstac in Multicam with medium placard. I believe they no longer make this model. Plates are Hesco 3810’s. I do most of my shooting/training with this set up and I’ve been very happy with it. I also have a 7.62 placard for AK mags when needed.
Attached File For fun, I’m experimenting with a backup “slick” carrier. This is the T-Rex Arms AC1 and Hesco L210 plates. Attached File And to compare against the AC1, I just purchased a Ferro Concepts “Slickster” and added an Esstac placard. Attached File |
|
"Traveling through hyper-space ain't like dusting crops boy."
WMD, we all miss you buddy. RIP Art Bell: June 17, 1945 - April 13, 2018 |
I see all the cool setups and think..."I need more money!"
What is everyone favorite hydration setup with a PC, or not at all? |
|
|
|
Next stop, success!
|
Originally Posted By armoredman: I see all the cool setups and think..."I need more money!" What is everyone favorite hydration setup with a PC, or not at all? View Quote I don’t like having anything buckled to the back of my PC as I’m usually in and out of vehicles a lot. If I need more than the cases of water in the truck or am going to be away for a bit I’ll just put a throw a Camelbak on. If I need to carry stuff I just put the Camelbak in my ruck or assault pack. |
|
|
|
Originally Posted By Sniper3142: On my Agilite K19, I'm running a Camelbak Milspec 1.5L hydration bladder & tube in a HSP Flatpack 2.0. So far it all fits & functions great together. View Quote I'm doing something similar, but with the Agilite AMAP3 instead. It's a nice pack, and a good deal larger than the Flatpack, which is a blessing and a curse. Biggest issue with the AMAP with a bladder or anything in it, is that it interferes with my sling setup, whereas a Flatpack doesn't cause any real issues. |
|
|
Looking for a cheap-ish placard to add to a Ferro Slickster for 3 AR mags and a couple pistol mags and/or a few misc pouches for some light med stuff, batteries, etc.
|
|
|
Originally Posted By Macchina: Looking for a cheap-ish placard to add to a Ferro Slickster for 3 AR mags and a couple pistol mags and/or a few misc pouches for some light med stuff, batteries, etc. View Quote Define cheap-ish? The RDR Gear MSP is a pretty good value. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.