Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Posted: 10/11/2001 4:16:33 AM EDT
Link Posted: 10/11/2001 4:29:34 AM EDT
Link Posted: 10/11/2001 6:52:51 AM EDT
Real nice deal!

Make sure that you polish the facing side of the mag (where it contacts the disconnect). You'll get a noticably smoother trigger pull.
Link Posted: 10/11/2001 1:08:06 PM EDT
Link Posted: 10/12/2001 1:37:34 PM EDT
Inglis...that makes it a "home made" gun for Striker? Removing the disconnect will improve let off to super nice. No more creep or drag. WARNING; gun will fire with magazine removed, however. I removed just the disconnector spring, and reinstalled the disconnector, just to fill the hole. It works fine too.
Link Posted: 10/12/2001 3:26:44 PM EDT
Link Posted: 10/14/2001 7:28:52 PM EDT

Originally Posted By Striker:
Thanks for the info anothergene. I'm hoping it is an Inglis for that very reason but even if it isn't I'm still going to get it. Now..problem number 1. You guys have any tips,tricks,or secrets for getting it to my gun cabinet without the "boss" seeing it?



You must have at least 2 identical pistol cases.
Link Posted: 10/16/2001 7:42:34 PM EDT
The BHP's I see are going for $500 plus, I hope some more surplus ones come in from Argentina.
Link Posted: 10/17/2001 12:17:06 PM EDT
Link Posted: 10/17/2001 6:07:46 PM EDT
Whats wrong with the adjustable sight? I saw (and passed) on the fixed, they have that hump where the sight blade goes in...dont look right. You are getting the one I would choose. Hows the finish? Are those the 13 round mags? Believe it or not, I have some Ram-line 15 round SS for that and they even work! I drilled out the rivet in one and used FEG floorplate, spring and follower so I ended up with a SS 13 round BHP/FEG mag, it never skipped a beat. No private sales there? I ask too many questions, I share your enthusiasm.
Link Posted: 10/18/2001 5:38:20 PM EDT
Link Posted: 12/26/2001 7:16:23 AM EDT
Link Posted: 12/29/2001 5:40:58 PM EDT
Sounds like you got a super deal! Can't beat that price.
Link Posted: 12/30/2001 9:12:54 AM EDT
Nice.
Does it have the slot for a shoulder stock?
Some Inglis HiPowers do.
Link Posted: 12/30/2001 11:57:16 PM EDT
Striker, would it be cheaper to just fit a fixed rear sight onto your current slide?


Originally Posted By anothergene:
Believe it or not, I have some Ram-line 15 round SS for that and they even work! I drilled out the rivet in one and used FEG floorplate, spring and follower so I ended up with a SS 13 round BHP/FEG mag, it never skipped a beat.



Great news. I was thinking of trying that, too. I just didn't want to dork up a still-working mag to try it. It's good to know converting them to standard springs is an option.

Was there any problem fitting a baseplate, or did they slide right on?
Link Posted: 12/31/2001 5:31:00 AM EDT
[Last Edit: 12/31/2001 5:38:21 AM EDT by Striker]
Link Posted: 12/31/2001 3:52:11 PM EDT
Sounds too good to be any good. Bet it needs work and/or a new barrel at least...good luck though. I see a good-shape Inglis made in Canada one in Guns Canada website for more money but better looking, and it has a picture...check it out.
Link Posted: 12/31/2001 3:53:30 PM EDT
Sounds too good to be any good. Bet it needs work and/or a new barrel at least...good luck though. I see a good-shape one in Guns Canada website for more money but better looking, and it has a picture...check it out.
Link Posted: 1/1/2002 6:17:27 AM EDT
Link Posted: 1/3/2002 5:32:28 AM EDT
[Last Edit: 1/3/2002 5:33:56 AM EDT by anothergene]
Striker, TRB,the floorplates slid right on the ramlines, Just getting the rivet out was the hardest part. An FEG follower and spring and floor plate fit too. Also, I have two Ramlines for your Taurus, one blue one SS if you want them. They are 17 shot and just sitting on top of my safe. Are you allowed to have those? Selling your adj. sight slide?
Link Posted: 1/3/2002 11:17:05 AM EDT
Link Posted: 1/4/2002 4:51:40 AM EDT
Hi-caps are banned in Canada? oops, sorry! No grandfather clause, or LEO exceptions? Were the pre-ban ones turned in? What next, the Euro for Canada?
Link Posted: 1/4/2002 5:00:42 PM EDT
Link Posted: 1/5/2002 4:38:19 PM EDT

Originally Posted By anothergene:
the floorplates slid right on the ramlines, Just getting the rivet out was the hardest part. An FEG follower and spring and floor plate fit too.



good. now where do I get spare followers, springs, and floorplates? I hope the answer isn't "Buy a hicap mag to get the internal parts." :)
Top Top