User Panel
User Panel
User Panel
|
Posted: 11/18/2016 4:03:20 PM EDT
[#1]
I had a local gunsmith that is known for doing good work cut and crown my barrel on my SLR 106UR. I would first look around in your area for a gunsmith that can do that kind of simple work, before sending it out
|
|
|
|
Posted: 11/18/2016 7:48:45 PM EDT
[#2]
Ok, I will look around. I was just thinking of sending it out to a group known to be really good at this since I've heard of some of these AK jobs going wrong. Looking to get it SBR'd and hang a DeadAir Wolverine off the end.
|
|
|
|
Posted: 11/18/2016 11:01:18 PM EDT
[#3]
If all you need is a chop & crown send it to Morgan (easttxhunter) @ class3machining, here's his thread in the EE http://www.ar15.com/forums/t_7_143/1029861_Barrel_Threading_sale__50__PTR_91__Tavors__Augs__Scar__Sig_MPX__Beretta_21A_Threading__FAL__PAPM92.html
|
|
|
|
Posted: 11/19/2016 6:56:18 PM EDT
[#4]
I have my SLR107UR on its way back from these guys. This was my first experience with them and pending the rifles' arrival for inspection, I'd fully recommend them. They had excellent communication, fair pricing and good turn around time. Others have recommended them, so I thought I'd give them a try...
Two Rivers Arms 3921 S. Bryant Ave. Oklahoma City, OK 73115 Web - www.tworiversarms.com Email - [email protected] 405-331-0008 |
|
|
|
Posted: 11/21/2016 3:52:02 PM EDT
[#5]
I second this. They did an awesome job installing an under folder on my M92 Pap, and as soon as my stamp comes in for my Draco it's going there as well.
Quote HistoryQuoted:
I have my SLR107UR on its way back from these guys. This was my first experience with them and pending the rifles' arrival for inspection, I'd fully recommend them. They had excellent communication, fair pricing and good turn around time. Others have recommended them, so I thought I'd give them a try... Two Rivers Arms 3921 S. Bryant Ave. Oklahoma City, OK 73115 Web - www.tworiversarms.com Email - [email protected] 405-331-0008 |
|
|
|
Posted: 11/23/2016 5:49:06 PM EDT
[#6]
I just received my SLR-107UR just arrived and I'm very pleased with the work they did. Two thumbs up! They cut the barrel, did the gas work and engraved my Trust info on the rifle. Here are a few pictures:
|
|
|
|
Posted: 11/24/2016 12:34:46 PM EDT
[#7]
I'm gonna go out on a limb here but, I had great success shortening my 104UR myself. After getting my stamp, I used a kit by Manson precision reamers. I t came out great. Price was reasonable.
|
|
|
|
Posted: 11/24/2016 8:17:54 PM EDT
[#8]
Quote HistoryQuoted:
I just received my SLR-107UR just arrived and I'm very pleased with the work they did. Two thumbs up! They cut the barrel, did the gas work and engraved my Trust info on the rifle. Here are a few pictures: http://i426.photobucket.com/albums/pp345/fuatos/20161123_141845_1479936841147_zpswep5t05r.jpg http://i426.photobucket.com/albums/pp345/fuatos/cc6c6e41-69ba-4ca7-a48a-78e8866a972b_zpsquylb8yx.jpg http://i426.photobucket.com/albums/pp345/fuatos/20161123_143009_1479936858751_zpsdc0zikpw.jpg What did they end up charging because my 107UR needs the same thing done. |
|
|
|
Posted: 11/24/2016 10:32:02 PM EDT
[#9]
I had a local guy cut and crown my 107cr. Shoots great and cost me like $60. Nothing else needed on the CR.
|
|
|
|
Posted: 11/24/2016 10:44:17 PM EDT
[#10]
It was a little over $200 + shipping... I forgot they also pulled the gas block/ front sight to drill out the donut/plug Arsenal puts in there. If I remember correctly, most of the 107's needed the donut removed/drilled out, whereas the 104's don't. I'm going to do the barrel cut and finish on my 104 once it is approved.
|
|
|
|
Posted: 11/25/2016 12:20:04 AM EDT
[#11]
Quote HistoryQuoted:
It was a little over $200 + shipping... I forgot they also pulled the gas block/ front sight to drill out the donut/plug Arsenal puts in there. If I remember correctly, most of the 107's needed the donut removed/drilled out, whereas the 104's don't. I'm going to do the barrel cut and finish on my 104 once it is approved. Thank you. Gives me a good idea of what my first SBR adventure will cost  .
|
|
|
|
Posted: 3/11/2017 1:15:42 AM EDT
[#12]
I had Adco do mine, worked out great. I think with the CR there is just the barrel cut, no restrictor removal to deal with.
|
|
|
|
Posted: 3/30/2017 2:31:49 AM EDT
[#13]
Quote HistoryQuoted:
I'm gonna go out on a limb here but, I had great success shortening my 104UR myself. After getting my stamp, I used a kit by Manson precision reamers. I t came out great. Price was reasonable. |
|
|
|
Posted: 4/13/2017 2:19:55 PM EDT
[#14]
Thank you for the info I have one I want to have chopped down
|
|
|
|
Posted: 5/20/2017 12:31:57 AM EDT
[#15]
Quote HistoryQuoted:
I have my SLR107UR on its way back from these guys. This was my first experience with them and pending the rifles' arrival for inspection, I'd fully recommend them. They had excellent communication, fair pricing and good turn around time. Others have recommended them, so I thought I'd give them a try... Two Rivers Arms 3921 S. Bryant Ave. Oklahoma City, OK 73115 Web - www.tworiversarms.com Email - [email protected] 405-331-0008 I bought a factory SBR 104UR and while that stamp was pending I bought a non SBR version. I ended up SBRing that one too. I litterally watched a YouTube video on cutting and crowning it and ended up using a hacksaw and a brass screw with polishing compound to cut and crown jt. the one that I used a hack saw on has not keyholed once at any distance. the factory SBR keyholes like a bitch. arsenal basically said fuck you when I asked about them correcting the problem on the factory one. |
|
|
|
Posted: 5/20/2017 2:01:33 AM EDT
[#16]
Done 2 slr104s with a hacksaw, flat file, brass screws and grinding paste. They both shoot fine.
|
|
|
|
Posted: 5/20/2017 8:32:17 PM EDT
[#17]
Quote HistoryQuoted:
You actually paid someone to cut and crown a barrel on that? I'm sorry. I bought a factory SBR 104UR and while that stamp was pending I bought a non SBR version. I ended up SBRing that one too. I litterally watched a YouTube video on cutting and crowning it and ended up using a hacksaw and a brass screw with polishing compound to cut and crown jt. the one that I used a hack saw on has not keyholed once at any distance. the factory SBR keyholes like a bitch. arsenal basically said fuck you when I asked about them correcting the problem on the factory one. |
|
|
|
Posted: 5/28/2017 9:18:08 AM EDT
[#18]
I also did my own when I did my 105 (107CR, but in 5.45). Hack saw and crowning tool. Tools are relatively cheap, and I've used that crowning tool a lot since I bought it. More than paid for itself.
potato pic: I originally left some meat on it and threaded for a suppressor, but have since cut it that off, no suppressor $ in my near future. 
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
