Does anyone make a stock adapter that goes on the SLR106ur or the SLR107ur that just has the AR15 threading so I can install an AR stock?  I've seen the ones that has the whole buffer tube setup but I just want the AR style threading so I can install a AR collapsible wire stock.

Thanks!

CSF

http://www.srvv.org/en/catalog/1657/48954/ this is what u want but its impossible to find most of the time.... I made my own from a piece of "L" shaped steel.. bolted thru the pistol grip screw hole and I drilled a small hole close to back of receiver and used a 2nd bolt to secure it.. instead of the ar buffer tube i used a piece of square tubing welded to it so  that a triangle stock  would slide back and forth on ( I used a airsoft steel folder I got on ebay for 10.00 bucks) and made my own "bump fire " stock that looks almost exactly like a regular krink stock
john in Houston

JMac Customs...

http://www.jmac-customs.com/ak_parts_and_accessories/45mm_ak_to_ar_buffer_tube_stock_adapter

Great piece of kit.  Be warned, its a pain keeping the buffer tube aligned while tightening the castle nut.

That adapter uses a 5.5mm stock pin which is not compatible with the 106/107 series which uses a 4.5mm pin and a slightly different angle to the rear trunnion.