Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel

Log In

A valid email is required.
Password is required.
Site Notices
1/14/2017 8:11:35 PM
Posted: 11/8/2012 7:30:21 AM EST
[Last Edit: 11/8/2012 7:30:38 AM EST by thecreeper23]
Is there any practical difference in the different styles of combloc side-plates used to mount optics?

I want to be able to mount the RS Regulate AKM mount to my rifle.

Does it matter if I get the Russian MTK-03, for example:


verses the Bulgarian -74 style mount:


Will they both work the same?
Link Posted: 11/8/2012 4:56:37 PM EST
[Last Edit: 11/8/2012 4:57:10 PM EST by TX-Zen]
I tend to favor 74 pattern and newer rails like RMP3 and the 74M rails but the MTK03 should work with the RS mount. The trickier part is what kind of AK you have which will determine what kind of rail to install because the rivets do not always line up from model to model. I prefer AK74 variants like the SLR series and the Saiga / SGL's which all use either the RMP3 style or the 74M. When you get into 7.62 AK's things open up quite a bit and there can be large variations in side rail mounting depending on the country and optic in question.



Z
Link Posted: 11/9/2012 6:38:31 AM EST
I am actually looking at putting mounts on two rifles––one built on a NDS-1KP receiver, the other built on a NDS2-EZ receiver. So, one 7.62 pattern and one 5.45 pattern.
Top Top