User Panel
User Panel
User Panel
|
Posted: 2/6/2017 1:33:38 PM EDT
[#1]
Quote HistoryOriginally Posted By Rjeezie:
What stock is the first one? Quote HistoryOriginally Posted By Rjeezie:
Originally Posted By Jlgil73:
Here are a couple of mine. Been taking a few pics lately? What stock is the first one? Which is the first one? The SBR has a LMT's PDW SopMod system, and the 2 tone rifle has the Magpul UBR. |
|
|
|
TX, USA
|
Posted: 2/6/2017 2:56:49 PM EDT
[#2]
Quote HistoryOriginally Posted By Jlgil73:
Which is the first one? The SBR has a LMT's PDW SopMod system, and the 2 tone rifle has the Magpul UBR. Yeah, worded that question terribly. The 2 tone is what I was asking for. Thanks! |
|
|
|
Posted: 2/6/2017 8:41:00 PM EDT
[#3]
|
|
|
|
LA, USA
|
Posted: 2/6/2017 11:51:10 PM EDT
[#4]
|
|
|
|
Posted: 2/7/2017 11:17:17 PM EDT
[#5]
Quote HistoryOriginally Posted By simplefolk:
http://www.ar15.com/media/mediaFiles/345639/FullSizeRender--8--139317.jpg What's the details on the barrel and rail? |
|
|
|
|
Posted: 2/10/2017 6:26:03 PM EDT
[#6]
|
|
|
|
AR, USA
|
Posted: 2/10/2017 11:01:15 PM EDT
[Last Edit: SC4eyes]
[#7]
This is the first AR that I have ever shot, after I built it from bare upper and lower receivers. I got the MBUS sighted in at 30 yards.
Today I got the Leupold one piece mount and mounted an OG NIKON Tactical 2.5x10, can't wait to sight in the scope and shoot some groups. Aero Precision upper, lower, and Quantum handguard. Lothar Walther 16" midlength, wylde 1-8, nitride barrel Larue trigger SLR adjustable gas block Ace stock Smith Vortex flash hider PSA bolt carrier group BCM charging handle Color by Krylon Cammo 
|
|
|
|
Posted: 2/11/2017 1:51:03 AM EDT
[#8]
I am waiting on a used carry handle from the EE to replace the KAC. I don't know why, but I find this gun aesthetically pleasing. Will be done with addition of carry handle. Nothing special, WW 1/9 factory upper, bushmaster lower, spikes lpk and buffer kit with st-t2. The rest is self explanatory.
 Attached File |
|
|
|
|
Posted: 2/11/2017 2:04:32 PM EDT
[#9]
Quote HistoryOriginally Posted By Idpapaperoperator:
I am waiting on a used carry handle from the EE to replace the KAC. I don't know why, but I find this gun aesthetically pleasing. Will be done with addition of carry handle. Nothing special, WW 1/9 factory upper, bushmaster lower, spikes lpk and buffer kit with st-t2. The rest is self explanatory. https://www.AR15.Com/media/mediaFiles/407067/PicsArt-02-11-12-144412.JPG Mix master but with classic lines...that thing speaks to me! Love it, great work. |
|
|
|
|
Posted: 2/11/2017 4:40:04 PM EDT
[Last Edit: Idpapaperoperator]
[#10]
Quote HistoryOriginally Posted By Aeneas2020:
Mix master but with classic lines...that thing speaks to me! Love it, great work. Thanks  I'll post up more pics once the Carry Handle gets in on monday, it should balance it out a bit. I also need to fix the tape switch for the light it's all caddywampus.
Finally finished, carry handle came in early!  Attached File |
|
|
|
|
Posted: 2/11/2017 9:20:52 PM EDT
[#11]
Free LaRue barrel turned into an upper receiver build.
Borrowed the lower from another rifle... 16" PredatAR barrel LaRue gas block ALG MLOK rail MEGA upper Daniel Defense fixed sights and BCG Gunfighter Mod 5 CH 
|
|
|
|
NC, USA
|
Posted: 2/11/2017 10:09:22 PM EDT
[#12]
I didn't put much into the back drop but this was my first build and my first AR. I broke it in yesterday without a single jam or malfunction. Very Happy! Lower: 80% milled on Grizzly G0704 / Colt Black Duracoat Upper: Yankee Hill - stripped Mil Spec / Re-painted Colt Black Duracoat Nitride QPQ 7.62x39 Bolt Carrier group Bravo Company / Vltor Charging Handle ICD Low Profile Adjustable Gas Block & stainless tube (mid length) KAK Industries 18" chrome lined 1:9.5 twist melonite barrel ALG Enhanced trigger Wolff Heavy Hammer Spring Daniel Defense Butt-Stock Daniel Defense Pistol Grip (with integrated oversized trigger gaurd) Spikes H2 Buffer / Mil Spec Tube / DS Arms Rifle length polished spring 12" Slim Key-Mod handguard Odin Works XMR1 extended magazine release UTG Red/Green CQB Dot and UTG 3X Magnifier C-Products 30 round magazine Custom laser engraved safety selector (both sides) and caliber on upper over ejection port cover |
|
|
AZ, USA
|
Posted: 2/11/2017 11:37:01 PM EDT
[#13]
Finished up a pair of twins earlier this week. Faxon barrels & gas blocks, MI rails, Unity mounts, Streamlight RM1s, Blitzkrieg chevrons, Spikes buffers & gas tubes, JP springs, CMC triggers, blah blah.
|
|
|
PA, USA
|
Posted: 2/12/2017 12:12:53 AM EDT
[#14]
Quote HistoryOriginally Posted By BBar605:
Got your hammer spring on correctly? Ding ding |
|
|
|
Posted: 2/12/2017 9:24:11 AM EDT
[#15]
|
|
|
|
LA, USA
|
Posted: 2/12/2017 7:57:16 PM EDT
[#16]
|
|
|
VA, USA
|
Posted: 2/12/2017 10:58:03 PM EDT
[#17]
my second AR Build
BAD LW upper/lower FDE Midwest industries 15inch keymod rail criterion 18inch hybrid barrel griffin armarment comp Geissele SD-E Trigger mission first minimalist stock moe grip, sights bcm bcg and charging handle coming in a 6lbs 10oz withouth the red dot and mag 
|
|
|
LA, USA
|
Posted: 2/12/2017 11:07:48 PM EDT
[Last Edit: Drop12]
[#18]
For a friend. His first. I co designed and assembled. Left handed side charger. The upper is so nice and functions so well seriously considering getting one. Looks amazing with an ax556 lower.
|
|
|
KS, USA
|
Posted: 2/13/2017 12:26:51 AM EDT
[#19]
Is a pistol build allowed in this section?
PSA 8.5" 1/7 300 BLK on a PSA blem lower. Vortex Sparq AR Shockwave brace 
|
|
|
LA, USA
|
Posted: 2/13/2017 3:11:16 PM EDT
[#20]
Quote HistoryOriginally Posted By M4ger:
https://c2.staticflickr.com/6/5756/30801554161_bc2f225808_h.jpg slick gun. what are its stats? |
|
|
|
Posted: 2/13/2017 5:01:13 PM EDT
[Last Edit: M4ger]
[#21]
Quote HistoryOriginally Posted By Mccray: slick gun. what are its stats? Lower half is KAC Special Run edition and the upper is my URX3 Rifle Length legacy with the Triple Tap. Aimpoint Comp ML3 or C3 in KAC mount. Shoots like a dream. Finished this one today with the Rifle Length URX2 SR-15 E3 upper I've had for a while now and one of the new KAC stripped lowers built out almost entirely KAC components (except buffer tube, pistol grip, selector, and muzzle device). 
|
|
|
|
MN, USA
|
Posted: 2/13/2017 6:44:04 PM EDT
[Last Edit: deertick]
[#22]
Here is a light weight build. The light weight parts are:
16" 1:8 wylde cm bbl. Colt non assist upper A1 Ace buttstock |
|
|
LA, USA
|
Posted: 2/13/2017 6:57:56 PM EDT
[#23]
First build from years ago. Learned everything I needed to know roght here on this site. |
|
|
|
Posted: 2/13/2017 10:49:45 PM EDT
[#24]
My relatively new Recce, my block 1 (work in progress) and my newish KISS
 Attached File Attached File Attached File |
|
|
|
|
Posted: 2/13/2017 11:17:15 PM EDT
[#25]
Quote HistoryOriginally Posted By Annunaki:
Make sure your hammer springs' legs are installed over the triggers' cross pin. Sometimes builders forget to get those hammer spring legs over the cross-pin and they ride below, on the floor of the lower receiver, which reduces hammer striking power. Good luck Kemosabi. Quote HistoryOriginally Posted By Annunaki:
Originally Posted By PaulPlays:
Still deciding on optics. Might just do irons. Its lubed...problem is when i pull the trigger with a round in chamber, it clicks but doesn't hit the primer enough, Just makes a little dimple. i compared to a known good working rifle, trigger and bolt looks OK. Maybe head space? Just going to take it to a smith one of these days. So it looks like it was the buffer set up I chose. I put in a working BCG from another working rifle and then it finally shot, but then bolt would get stuck to the rear half the time and I'd have to release the bolt catch before pulling the trigger. Then I put on a suppressor in it, and it ran flawlessly. I also put the original BCG from the built rifle I posted into the working rifle to see if it ran OK, and it did. I think the only combo I didn't try is to normal up the build, and shoot it with the suppressor on. And the buffer is the JP Enterprise Silent buffer spring. Probably not the best choice, but the direction if the rifle changed during the build. |
|
|
|
|
Posted: 2/14/2017 7:34:59 AM EDT
[Last Edit: Infidel4life11]
[#26]
|
|
|
|
|
Posted: 2/14/2017 10:24:32 PM EDT
[#27]
|
|
|
|
|
Posted: 2/15/2017 3:27:51 PM EDT
[#28]
Quote HistoryOriginally Posted By deertick:
Here is a light weight build. The light weight parts are: 16" 1:8 wylde cm bbl. Colt non assist upper A1 Ace buttstock Where? |
|
|
|
|
Posted: 2/23/2017 4:18:01 AM EDT
[#29]
Aero upper and lower
10.3" DD barrel Azimuth nitride BCG SLR solo 9" rail Geissele SD3G trigger Cmmg lpk less trigger and grip Bcm grip Bcm keymod vfg Basic Milspec buffer assy with h-3 buffer carbine spring B5 sopmod stock Odin nitride gb AAC 51t comp AAC 556-SD Eotech HHS II Troy HK front sight standard rear sight Surefure M600 light / click pressure switch  Attached File Attached File |
|
|
|
MO, USA
|
Posted: 2/23/2017 11:26:18 AM EDT
[Last Edit: bigboy1122]
[#30]
http://www.ar15.com/forums/t_3_4/409405_.html&page=149&anc=7380957#i7380957
Quote HistoryOriginally Posted By Drop12: Can some tell me what muzzle device this is in this picture? |
|
|
|
Posted: 2/23/2017 11:57:39 AM EDT
[#31]
Quote HistoryOriginally Posted By bigboy1122:
http://www.ar15.com/forums/t_3_4/409405_.html&page=149&anc=7380957#i7380957 Can some tell me what muzzle device this is in this picture? Gemtech Blast Jacket Link |
|
|
|
|
Posted: 2/23/2017 2:30:32 PM EDT
[#32]
Here is my CQBR Clone
Upper: Colt 6920 upper receiver group with barrel cut down to 10.3" and gas port opened to appropriate size by Adco. KAC RAS KAC Vert Grip KAC Rail Covers KAC M4QD Flash Hider Matech Rear Sight PRI GasBuster Eotech EXPS & G33 Magnifier Lower: Noveske Forged Lower KAC Ambi Selector KAC Ambi Mag release Larue MBT 2 Stage Trigger CQD Rear Sling Mount Sopmod Stock Blue Force Gear Sling A2 Grip 
|
|
|
|
|
Posted: 2/23/2017 11:44:02 PM EDT
[#33]
|
|
|
|
FL, USA
|
Posted: 2/24/2017 5:38:49 PM EDT
[Last Edit: IBSlingin]
[#34]
|
|
|
|
Posted: 2/24/2017 5:41:28 PM EDT
[#35]
Quote HistoryOriginally Posted By IBSlingin: Nice Simple Build, Love CMT, I have built a couple rifles build on their sets. |
|
|
|
LA, USA
|
Posted: 2/27/2017 6:53:47 PM EDT
[#36]
|
|
|
|
Posted: 2/27/2017 7:22:56 PM EDT
[#37]
 Attached Filepreban pwa lower BCM stripped upper BCM ELW BFH barrel 16" SLR ion lite 15" mlok stag BCG raptor charging handle BCM gas block+tube flash hider is on the way finally 
|
|
|
|
NY, USA
|
Posted: 3/2/2017 12:26:27 AM EDT
[#38]
Quote HistoryM4GER, Why does it look like your scope's on backwards? Mike |
|
|
|
Posted: 3/2/2017 2:37:34 AM EDT
[#39]
Quote HistoryOriginally Posted By watnny:
M4GER, Why does it look like your scope's on backwards? Mike It is mounted correctly. |
|
|
|
|
Posted: 3/2/2017 9:22:12 AM EDT
[Last Edit: SPTiger]
[#40]
My latest upgrades. Technically, only the uppers of these two are new builds. I built the upper with the Bushnell LPV on a Stag lower that I bought complete back in 2005. The precision AR started life as a 6.8 SPC that was the first total build that I had ever done. That was back in early 2009. My pictures just don't do these things justice.
Stag lower 16" Green Mountain chrome lined 5.56mm barrel Seekins Precision NOXs 12" handguard (and it's actually 13") Bushnell Elite 4200 1.25-4x24 scope (this scope was sitting in a box unused, so it caused a complete rebuild of my Stag 16" M4 upper) ADM Recon 30 mount PSA premium BCG 
Hughes Precision lower (don't know if they're still around, I bought it during the first Obama panic in early 2009) 16" melonite treated .223 Wylde barrel Cross Machine Tool 15" handguard PSA premium BCG Geissele two-stage trigger Vortex Viper HS-T 4-16x44 scope ADM Recon 30 mount I wanted to use Larue LT-104 mounts for both of these, but when I found a place I could get the ADM mounts for $126.78 shipped each it was a no-brainer. That was even cheaper than buying a used one off the EE. |
|
|
|
|
Posted: 3/2/2017 9:43:12 AM EDT
[Last Edit: SPTiger]
[#41]
I don't know what I just did. I tried to edit my post and somehow quoted it instead.
|
|
|
|
|
Posted: 3/2/2017 10:04:54 PM EDT
[#42]
In progress...
|
|
|
|
|
Posted: 3/3/2017 8:29:22 AM EDT
[#43]
Quote HistoryOriginally Posted By IBSlingin: What color is that handguard painted? Looks great! |
|
|
|
FL, USA
|
Posted: 3/3/2017 9:31:55 AM EDT
[#44]
Quote HistoryOriginally Posted By mohawk17:
What color is that handguard painted? Looks great! Thanks. Its a Tungsten/Black cerakote mix. |
|
|
WA, USA
|
Posted: 3/5/2017 2:29:37 AM EDT
[Last Edit: Krisalrube]
[#45]
|
|
|
|
Posted: 3/5/2017 11:45:46 AM EDT
[Last Edit: hvyduty]
[#46]
My son's first Rifle and his first build, for his upcoming 16th birthday!!
My son researched and selected the components (with help from dad). Spikes Crusader Lower Spikes Upper Spikes Buffer Tube Kit Vortex Flash Hider UTG PRO M-LOK 15" Super Slim Rail, Red 2-Tone LaRue 16" PredatAR Barrel LaRue MBT Trigger Magpul Front and Rear MBUS SLR Gas Block and Tube BCM Charging Handle B5 Systems Kryptek Typhon Stock and Pistol Grip Aim v2 Black Nitride BCG Blue Force Gear Kryptek Typhon Sling Aimpoint PRO RDS Odin Works XMR Extended Mag Release  Attached File Attached File Attached File |
|
|
|
WA, USA
|
Posted: 3/5/2017 7:10:12 PM EDT
[#47]
4lbs 9oz. still a work in progress.
|
|
|
WV, USA
|
Posted: 3/5/2017 11:22:28 PM EDT
[#48]
|
|
|
|
Posted: 3/6/2017 2:01:28 AM EDT
[#49]
|
|
|
|
|
Posted: 3/6/2017 11:46:15 PM EDT
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File