User Panel
Posted: 11/5/2016 9:22:44 PM EDT
Well, I have a thread to document the SP1 Carbine cloning effort using an SP1 Upper, Colt 1/7 6420 pencil barrel, and NDS601 lower. As luck would have it, as Harlan was shipping my 601 lower, I obtained another 601 lower from a gracious forum member at cost! Wow, this place rocks. Thanks, Sergio!
Anyway, that made me decide to loose the A2 lower on my tack driver 604, and make it a 602 slick bottom instead. I went 602 instead of 601, because my furniture is too nice to paint green. Problem was, I had to get another SP1 upper, so the grey would match my 601 lower. That caused me to sell off the 604 Fulton upper to fund the purchase of the second SP1 upper. Fortunately, I found an early square forge SP1 upper with no forge codes, to put my pencil barrel back on. then I needed to get a slick side chrome BCG for the 602, because a Nickel Boron M16a1 carrier just wouldn't do. Thanks Boywonder777! Then I ordered a triangle charging handle from NDS, and a 601 duckbill flash hider from Innovative industries, so it would be an early 602. Now I need to do some parts modifying in the LPK ARGHHHH! This is an illness. IT NEVER ENDS! |
|
Awesome man! We will need pictures. So the early 602 rifles had duckbills? I've always wanted a 601 clone but I have a nice set of furniture that I'd hate to paint so I might do an early 602 also.
ARKAR |
|
I know early 602s had triangular charging handles, and I would venture to say that Colt probably used up existing stocks of 601 duckbills, even after the officially changed the design to the standard 3 prong. I know in other martial arms (M1 Carbines, M1 Garands, M14) the military contractors always used up existing stocks of items that had been upgraded or modified. That's why a flat bot on a carbine that is early in the serial number block for round bolts is probably original.
As for my 602, I am going to modify a bolt catch to the early style with a dremel cut off wheel. I might even try the grooves with a fine file. |
|
|
Quoted:
http://i.imgur.com/9KNt0DB.jpg <a href="http://s6.photobucket.com/user/Iron_Airship/media/cast%20FSBs.jpg.html" target="_blank">http://i6.photobucket.com/albums/y236/Iron_Airship/cast%20FSBs.jpg</a> Did someone say 602? View Quote Sweet! |
|
OK, my square forge SP1 upper and Colt FCG are waiting at my office. I'll pick them up tomorrow when I go to work. I'll be able to put the faux-602 upper together. Can't pick up my pair of 601 lowers until Tuesday the 22nd because of 10 day jail at my FFL. Of course I could pick it up Sunday, but he is closed Sundays and Mondays! LOL. I hate waiting. It is not my strong suit!
|
|
Quoted:
OK, my square forge SP1 upper and Colt FCG are waiting at my office. I'll pick them up tomorrow when I go to work. I'll be able to put the faux-602 upper together. Can't pick up my pair of 601 lowers until Tuesday the 22nd because of 10 day jail at my FFL. Of course I could pick it up Sunday, but he is closed Sundays and Mondays! LOL. I hate waiting. It is not my strong suit! View Quote excellent |
|
Quoted:
http://i.imgur.com/9KNt0DB.jpg <a href="http://s6.photobucket.com/user/Iron_Airship/media/cast%20FSBs.jpg.html" target="_blank">http://i6.photobucket.com/albums/y236/Iron_Airship/cast%20FSBs.jpg</a> Did someone say 602? View Quote One of my favorite builds on this site. |
|
Quoted:
One of my favorite builds on this site. View Quote View All Quotes View All Quotes Quoted:
Quoted:
http://i.imgur.com/9KNt0DB.jpg <a href="http://s6.photobucket.com/user/Iron_Airship/media/cast%20FSBs.jpg.html" target="_blank">http://i6.photobucket.com/albums/y236/Iron_Airship/cast%20FSBs.jpg</a> Did someone say 602? One of my favorite builds on this site. Thank you, its the one Im most proud of and the last retro I would ever sell if it came to that. |
|
Quoted:
Thank you, its the one Im most proud of and the last retro I would ever sell if it came to that. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
http://i.imgur.com/9KNt0DB.jpg <a href="http://s6.photobucket.com/user/Iron_Airship/media/cast%20FSBs.jpg.html" target="_blank">http://i6.photobucket.com/albums/y236/Iron_Airship/cast%20FSBs.jpg</a> Did someone say 602? One of my favorite builds on this site. Thank you, its the one Im most proud of and the last retro I would ever sell if it came to that. That really is a magnificent build, Kalahnkid! |
|
Looks great, anyone know where to purchase a edgewater cap? Numrich is sold out.
|
|
|
Quoted:
Look what was waiting for me at work: Lionel (Boywonder777) with the FCG and Gary with the upper really came through: REALLY clean square forge! <a href="http://s247.photobucket.com/user/imarangemaster/media/602%20joy_zpsit7xppaq.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/602%20joy_zpsit7xppaq.jpg</a> View Quote Yep 602s are awesome! It's my new obsession build. I can't wait to get mine together. Those Special Forces advisors seemed to have a lot of them. So they look to be correct with either a triangle charging handle or a modern one. They also appear to not all be angled behind the carry handle? Might have to procure a waffle magazine as well. Pic for motivation! |
|
Quoted:
Yep 602s are awesome! It's my new obsession build. I can't wait to get mine together. Those Special Forces advisors seemed to have a lot of them. So they look to be correct with either a triangle charging handle or a modern one. They also appear to not all be angled behind the carry handle? Might have to procure a waffle magazine as well. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Look what was waiting for me at work: Lionel (Boywonder777) with the FCG and Gary with the upper really came through: REALLY clean square forge! <a href="http://s247.photobucket.com/user/imarangemaster/media/602%20joy_zpsit7xppaq.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/602%20joy_zpsit7xppaq.jpg</a> Yep 602s are awesome! It's my new obsession build. I can't wait to get mine together. Those Special Forces advisors seemed to have a lot of them. So they look to be correct with either a triangle charging handle or a modern one. They also appear to not all be angled behind the carry handle? Might have to procure a waffle magazine as well. Sadly, I sold my waffle when money was tight when I was off for shoulder surgery. Maybe Mike and Harlan will do another run???? (hint, hint) |
|
You know what would be awesome. An accurate copy of a cast colt early FSB!
|
|
|
Quoted:
A few years ago, I saw a "take off" .625" SGW cast FSB on gunbroker, and it went for a crazy amount. View Quote View All Quotes View All Quotes Quoted:
Quoted:
You know what would be awesome. An accurate copy of a cast colt early FSB! A few years ago, I saw a "take off" .625" SGW cast FSB on gunbroker, and it went for a crazy amount. With the talented group of retro machinists and metal workers in here I wouldn't think it would be that difficult. |
|
Quoted:
Here's the upper half: Colt SP1 upper, Colt 601 Bolt Carrier with AIM Nickel Boron bolt (too cheap to get an original chrome bolt!), NDS 601 triangular charging handle, Innovative Industries 601 "Duckbill" flash hider (so close they mark them with an "I" to prevent fraud), a NOS USGI flat slip ring assembly, and an AR15Sport.com 1/9 twist barrel so I can shoot heavier stuff than M193. I have even shot MK262 MOD1 77s, and they were 1 to 1.5 MOAish to 200 yards. Also it is wearing a beautiful, mint set of USGI triangular handguards that were new in the wrapper. I have everything for the lower, including Colt FCG. I am using a standard USGI red wine buffer, though, as I am also too cheap to buy an Edgewater! It is just a shooter, after all. Just waiting for my NDS 601 lower to get out of Californication 10 day jail. <a href="http://s247.photobucket.com/user/imarangemaster/media/new602-u_zpsuyeelbne.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/new602-u_zpsuyeelbne.jpg</a> View Quote Very nice! I thought 602s came with regular 3 prong flash hiders? |
|
Quoted:
Very nice! I thought 602s came with regular 3 prong flash hiders? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Here's the upper half: Colt SP1 upper, Colt 601 Bolt Carrier with AIM Nickel Boron bolt (too cheap to get an original chrome bolt!), NDS 601 triangular charging handle, Innovative Industries 601 "Duckbill" flash hider (so close they mark them with an "I" to prevent fraud), a NOS USGI flat slip ring assembly, and an AR15Sport.com 1/9 twist barrel so I can shoot heavier stuff than M193. I have even shot MK262 MOD1 77s, and they were 1 to 1.5 MOAish to 200 yards. Also it is wearing a beautiful, mint set of USGI triangular handguards that were new in the wrapper. I have everything for the lower, including Colt FCG. I am using a standard USGI red wine buffer, though, as I am also too cheap to buy an Edgewater! It is just a shooter, after all. Just waiting for my NDS 601 lower to get out of Californication 10 day jail. <a href="http://s247.photobucket.com/user/imarangemaster/media/new602-u_zpsuyeelbne.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/new602-u_zpsuyeelbne.jpg</a> Very nice! I thought 602s came with regular 3 prong flash hiders? Officially yes, as there were also supposed to come with standard charging handles. In reality, we know Colt used up existing triangular charging handles that were in stock on new 602 production, as all martial weapons producers do - especially when the weapons are not yet "official issue." I am sure that they probably did the same with flash hiders. Besides, it is only a "replica" rather than a strict "reproduction," and I like duckbills better! LOL WW2 M1 Carbine builders were notorious for using up existing stocks, even after the changes were specified. Carbines that technically should have had a round bolt, for example, would be produced with flat bolts until the flat bolts were all gone. The War Department did not want to waste good parts they already paid for! |
|
Beautiful build imarangemaster!!
Edited to add: I dig the duckbill 'hiders too. |
|
|
Dang, now I need to find a grenade spring! Just in case I ever want to shoot ENERGA anti-tank grenades LOL!
|
|
|
I think it would be cool to use those WWII re-enactor rubber bodied rifle grenades with regular blanks!
|
|
The 602 I have has a rounded area for a standard charging handle. I think they have both beveled and round. Probably been covered already.
|
|
|
|
Quoted:
Well, some pictures of the finished faux-602 build. Pardon the delay and the terrible indoor flash pictures. We are having the wettest, coldest November in over 50 years in Northern California, and I haven't had a decent day since the parts came in. Also, my internet is sh*t because of a defective broadband receiver/modem they just installed in the tree, and it takes an hour to upload one picture to photobucket!. <a href="http://s247.photobucket.com/user/imarangemaster/media/n602a_zpswxrvqvp1.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/n602a_zpswxrvqvp1.jpg</a> <a href="http://s247.photobucket.com/user/imarangemaster/media/n602c_zpsdhzdyqj7.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/n602c_zpsdhzdyqj7.jpg</a> <a href="http://s247.photobucket.com/user/imarangemaster/media/n602b_zpsyizcn637.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/n602b_zpsyizcn637.jpg</a> <a href="http://s247.photobucket.com/user/imarangemaster/media/n602d_zpsr05zgyfm.jpg.html" target="_blank">http://i247.photobucket.com/albums/gg134/imarangemaster/n602d_zpsr05zgyfm.jpg</a> View Quote Nice looking rifle. My 2 cents...............if your gonna run a duckbill on her you really should put a C stock on her. |
|
Quoted:
My 602 upper is beveled, I think they switched to the modern charging handle during the 602 run. View Quote View All Quotes View All Quotes Quoted:
Quoted:
The 602 I have has a rounded area for a standard charging handle. I think they have both beveled and round. Probably been covered already. My 602 upper is beveled, I think they switched to the modern charging handle during the 602 run. My original 602 upper is also rounded for a standard charging handle. I've always just figured it was a later model. I'll post a pic after I take one...I've had all the parts, including Edgewater, chrome BCG, original upper and upper parts, NDS lower and lower parts, and 602 furniture for years. Maybe now I'll be motivated to assemble it... |
|
Quoted:
My original 602 upper is also rounded for a standard charging handle. I've always just figured it was a later model. I'll post a pic after I take one...I've had all the parts, including Edgewater, chrome BCG, original upper and upper parts, NDS lower and lower parts, and 602 furniture for years. Maybe now I'll be motivated to assemble it... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
The 602 I have has a rounded area for a standard charging handle. I think they have both beveled and round. Probably been covered already. My 602 upper is beveled, I think they switched to the modern charging handle during the 602 run. My original 602 upper is also rounded for a standard charging handle. I've always just figured it was a later model. I'll post a pic after I take one...I've had all the parts, including Edgewater, chrome BCG, original upper and upper parts, NDS lower and lower parts, and 602 furniture for years. Maybe now I'll be motivated to assemble it... What barrel is on it? |
|
Quoted:
Quoted:
Quoted:
Quoted:
The 602 I have has a rounded area for a standard charging handle. I think they have both beveled and round. Probably been covered already. My 602 upper is beveled, I think they switched to the modern charging handle during the 602 run. My original 602 upper is also rounded for a standard charging handle. I've always just figured it was a later model. I'll post a pic after I take one...I've had all the parts, including Edgewater, chrome BCG, original upper and upper parts, NDS lower and lower parts, and 602 furniture for years. Maybe now I'll be motivated to assemble it... What barrel is on it? I have to quantify this - the barrel did not come with the upper, so it's not original. I have an M VP barrel on it, reasonably period-correct for a late 602, as I understand it or rationalize... |
|
Quoted:
Well, some pictures of the finished faux-602 build. Pardon the delay and the terrible indoor flash pictures. We are having the wettest, coldest November in over 50 years in Northern California, and I haven't had a decent day since the parts came in. Also, my internet is sh*t because of a defective broadband receiver/modem they just installed in the tree, and it takes an hour to upload one picture to photobucket!. View Quote Very Nice Build!!! |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.