User Panel
Originally Posted By senorlechero: Yeah, I went and re read what I could stand to, and while there’s no way to know for sure if you’re right or not, I don’t want to be a test case. I just wanted something to plug up the hole in the stock to keep debris out. Stupid, we shouldn’t have to deal with any of this. View Quote Well, shit... I am truly sorry I asked, but thanks anyway. |
|
|
Originally Posted By doc_Zox: Yes, Virginia, there is a broomhandleclaus I bought that adaptor of a guy that built them for phantom paintball rigs while phantoms will use AR grips ARs will not mount Phantom grips I had to mod the interior interface to get it close to working, but it is 3/8th out on the top edge and not fully seated the grip scales are from a reinactor supply shop https://mantheline.com/product/c96-broomhandle-mauser-pistol-grips/ I contacted FutureForged about the idea Maybe if y'all emailed them, they might make this a product in their grip line https://futureforged.com/ https://www.AR15.Com/media/mediaFiles/3097/4BEB1024-031B-4121-A4D7-E67653F84862-1624560.jpg View Quote Cool, thank you. I manufacture a version of the "Solo AR" and am considering designing a broomhandle grip for it. I'll see if Future Forged is interested first! Check our pistols out at cantoarms.com. |
|
|
Originally Posted By Extraordinaire: https://i.imgur.com/TpLl5pU.jpg View Quote What buis are those? Very nice and clean setup. |
|
|
Originally Posted By officerX: My newest pistol, BRN-180S. Stripped BRN-180 lower, built with a Brownells LPK, and a complete BRN-180S upper. https://i.postimg.cc/N0sk2XnT/69921842-87-A8-42-F3-B0-FA-46-CF99-D36-D1-A.jpg View Quote FINALLY got my SB TF1913 brace in today! I'll post more pics after I get home from work. ETA: I’m pretty impressed with it so far! Have to see how well it does while shooting. Attached File Attached File Attached File Attached File Attached File Attached File Attached File |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
|
|
|
|
Have Bill call me...
|
Originally Posted By Moto-M187: I'm helping jds out https://www.AR15.Com/media/mediaFiles/481874/8-E8-AA693-5-C63-4-D68-8-BEF-876-FCEF078-1641080.JPG View Quote Arf photo hosting is so awful sometimes. Here's the full res photo: |
|
|
|
|
|
Slide-action upper from solo300.com
8.5" barrel in .300 BLK, 1/7 twist from Bison Armory KNS rear receiver rail. Attached File Attached File Attached File Attached File Best, JBR |
|
"I do not avoid women, Mandrake. But I do deny them my essence."
"Yes... yes. This is a fertile land, and we will thrive. We will rule over all this land, and we will call it... This Land." |
Originally Posted By Moto-M187: I'm helping jds out https://www.AR15.Com/media/mediaFiles/481874/8-E8-AA693-5-C63-4-D68-8-BEF-876-FCEF078-1641080.JPG View Quote View All Quotes View All Quotes Originally Posted By Moto-M187: Originally Posted By JDS5700: https://ibb.co/hHKXkBx I'm helping jds out https://www.AR15.Com/media/mediaFiles/481874/8-E8-AA693-5-C63-4-D68-8-BEF-876-FCEF078-1641080.JPG THANK YOU! Able to directly post images now. Picked up the Bronze Membership. |
|
|
When Rona has most things locked down its a great time to build. Dont mind the carbine in the middle, they were all built recently so its a family pic Attached File
|
|
|
|
Update: Added Ambidextrous Safety, Enhanced Magazine Release, Extended Bolt Catch, Chrome Takedown Pins, Warhammer Extended Charging Handle, Polished SS Buffer Spring and H2 Tungsten Buffer Weight . Awaiting Sig Sauer Romeo 5, SI Carbine Length Pistol Buffer Tube and Hogue Pistol Grip.
Attached File Attached File |
|
"It is during our darkest moments that we must focus to see the light." -Aristotle
|
|
Originally Posted By HitTheForwardAssist: https://imgur.com/a/MgxQ9yk I guess I can't figure out how the hell to post an image. View Quote I think you have to be a paying member. |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
Originally Posted By HitTheForwardAssist: https://imgur.com/a/MgxQ9yk I guess I can't figure out how the hell to post an image. View Quote Attached File |
|
Have Bill call me...
|
Originally Posted By HitTheForwardAssist: https://imgur.com/a/MgxQ9yk I guess I can't figure out how the hell to post an image. View Quote You have to link to the actual image file that ends in .png or .jpg or whatever. The easiest way to do it is after you upload to imgur, you click on "get share links" and copy the one for forums which will have the bbcode tags already there. It'll look like this if you do it right: |
|
|
Pay $24 for the Bronze Membership then post directly from your phone, iPad or computer.
|
|
"It is during our darkest moments that we must focus to see the light." -Aristotle
|
Okay, I copied the forum url from imgur and edited my post. Still didn't work. How come it's so difficult here, yet on every other forum it's so easy? What am I doing wrong?
|
|
|
Originally Posted By HitTheForwardAssist: Okay, I copied the forum url from imgur and edited my post. Still didn't work. How come it's so difficult here, yet on every other forum it's so easy? What am I doing wrong? View Quote Did you see my post that said you have to be a paying member to post pics? |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
Originally Posted By HitTheForwardAssist: Okay, I copied the forum url from imgur and edited my post. Still didn't work. How come it's so difficult here, yet on every other forum it's so easy? What am I doing wrong? View Quote Shows for me. Since you're new, people have to approve your images. Originally Posted By officerX: Did you see my post that said you have to be a paying member to post pics? View Quote No you don't. You only have to be a member to use arf's photo hosting. If you're not a member you have to host them somewhere else, like imgur.com. |
|
|
Originally Posted By DaTrueDave: Shows for me. Since you're new, people have to approve your images. No you don't. You only have to be a member to use arf's photo hosting. If you're not a member you have to host them somewhere else, like imgur.com. View Quote My bad, I guess I was confused on that. Attached File |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
|
Originally Posted By officerX: My bad, I guess I was confused on that. https://www.AR15.Com/media/mediaFiles/335460/F8711B6A-5B48-4D73-99D8-754C8854170D_jpe-1645417.JPG View Quote curious as to how you're running a vertical grip on that if it's a pistol? |
|
|
Originally Posted By DaveManJack: curious as to how you're running a vertical grip on that if it's a pistol? View Quote It's not 90 degree vertical. So what was this new letter from the ATF? Vertical Grip is 90deg only? |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
|
Originally Posted By DaveManJack: it's literally marketed by BCM as a vertical grip, I don't think that counts. View Quote It doesn't matter how it's marketed. The ATF has determined, in all their infinite wisdom, that a vertical grip is at a 90 degree angle to the bore of the weapon. You can clearly tell by looking at the grip that it is slightly angled. |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
Originally Posted By officerX: It doesn't matter how it's marketed. The ATF has determined, in all their infinite wisdom, that a vertical grip is at a 90 degree angle to the bore of the weapon. You can clearly tell by looking at the grip that it is slightly angled. View Quote hey I think it's all pretty silly and arbitrary, and yes I know it's very slightly angled, but my understanding was that you can't have a grip designed to wrap the thumb around below the bore, what angle is acceptable, would 1 degree off count? |
|
|
Originally Posted By DaveManJack: hey I think it's all pretty silly and arbitrary, and yes I know it's very slightly angled, but my understanding was that you can't have a grip designed to wrap the thumb around below the bore, what angle is acceptable, would 1 degree off count? View Quote Given all their shenanigans with pistol braces I would say they like to work in the arbitrary zone. |
|
|
|
...
|
|
"The right to buy weapons is the right to be free"
|
Originally Posted By DaveManJack: curious as to how you're running a vertical grip on that if it's a pistol? View Quote View All Quotes View All Quotes Originally Posted By DaveManJack: Originally Posted By officerX: My bad, I guess I was confused on that. https://www.AR15.Com/media/mediaFiles/335460/F8711B6A-5B48-4D73-99D8-754C8854170D_jpe-1645417.JPG curious as to how you're running a vertical grip on that if it's a pistol? |
|
#NOVABATTLEBUDDIES
#FLUBRO4LYFE |
Originally Posted By MoonDancer: I've seen a lot of braces in this thread, but I do not recall ever seeing this one. Manufacturer, please? View Quote Brace is from Presma. It's all aluminum and nice quality. Put it on a Grid Defense buffer tube and so far it hasn't slipped with use. Got it here: https://ar15discounts.com/products/presma-skeletonized-ar-pistol-brace/ |
|
|
|
Originally Posted By officerX: It's not 90 degree vertical. So what was this new letter from the ATF? Vertical Grip is 90deg only? View Quote View All Quotes View All Quotes Originally Posted By officerX: Originally Posted By DaveManJack: curious as to how you're running a vertical grip on that if it's a pistol? It's not 90 degree vertical. So what was this new letter from the ATF? Vertical Grip is 90deg only? I can't remember, can you put a vfg that is not 90 degrees on a pistol regardless of the oal or is that a factor? If my pistol is less than 26" can I out one on or am I f'd? |
|
compulynx
She is retiring next year. (referring to Danica Patrick) aquaman67: Don’t let the wall hit you on the way out. |
Originally Posted By NCCobra: I can't remember, can you put a vfg that is not 90 degrees on a pistol regardless of the oal or is that a factor? If my pistol is less than 26" can I out one on or am I f'd? View Quote As wishy washy as the ATF is, the best bet is to stick with hand stops and angled foregrips on pistols. At the very least, don't put pictures on the internet, of a vertical grip wearing pistol... |
|
Have Bill call me...
|
|
|
|
Originally Posted By pewpew415: https://i.imgur.com/pvA0oRa.jpeg Glamour Shots: https://imgur.com/gallery/J8XNABk Parts List: https://docs.google.com/spreadsheets/d/1UEgM410oUYvPbdU26B4coYvoDh-AyHEK7sogzIfQQCY/edit?usp=sharing View Quote Lol, nice plant. |
|
World ain't what it seems, is it Gunny?
|
View Quote That looks a whole lot like an SBR???? |
|
Use Active Junky to get cash back for online purchases at hundreds of retailers like PSA, Brownells, Adademy and more! Sign up here: https://www.activejunky.com/invite/1437446
|
World ain't what it seems, is it Gunny?
|
|
Originally Posted By pewpew415: https://i.imgur.com/pvA0oRa.jpeg View Quote Wow, what a unique setup. Beautiful build. PIC THREAD: First is a 7.5" .300 AAC, followed by a 10.3" 5.56. Nothing special, but I like them and they shoot about as smooth as slowly thrusting one's turkey baster into a very juicy and plump bird. Uh... Yea, you can take that however you'd like? Man! Today's visit to ARFCOM made me hor... uuuuungry... |
|
|
|
|
|
"It is during our darkest moments that we must focus to see the light." -Aristotle
|
That’s a pretty sweet build. There’s something about a shorty with a FSB and traditional hand guards.
I’d really love to build a Heat inspired pistol. William Originally Posted By Plutonius: https://live.staticflickr.com/65535/50518246271_03eac9deb1_b.jpg https://live.staticflickr.com/65535/50518245936_fa58eb4438_b.jpg View Quote |
|
|
Originally Posted By doc_Zox: https://www.AR15.Com/media/mediaFiles/3097/D202245A-8CC8-41A2-B041-1C98534B48BD-1624624.jpg View Quote Neat, but if you're 3D printing something why not print it so it meshes better with the lower? |
|
RIP CPT Mike Medders and SGT Cory Spates
OIF 07-09 Diyala, Iraq |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.