Ok, so I've been looking at my rifle. I have noticed that the bolt is not going back far enough to engage the bolt catch and is more than likely my problem. Also I have attached some pictures to aid in the explanation. Buffer Spring as measured is 11.25" and the buffer is 3.25".
This picture illustrates as far back as the bolt will go with buffer and buffer spring installed. This is with the charging handle pulled back as far as possible.
This picture illustrates the bolt actually going behind the bolt catch as it should be. This is without the Buffer/Buffer spring installed ( I was curious).
Photo of buffer tube. Buffer tube is not banged up or scared in anyway, indicating the bolt is not hitting it.
Here is a photo showing the spring and buffer. Buffer is Marked "H" and is 3.25" long. Spring is 11.25" long.
I attempted swapping out the Spring from my S&W M&P 15 which is 10.25 inches long and nothing changed. I do believe this rules out the gas problem as it is clearly something interfering with the bolt going back as far as it should. What now guys?