User Panel
Posted: 2/13/2013 3:22:47 PM EDT
Have seen a few posts here and elsewhere concerning the quality of DPMS AR's. I have an M-4 and have no complaints whatsoever. Can someone please inform me of the drawbacks of these rifles. Thanks!
|
|
I'm not sure what they use for barrel steel (likely won't matter for any use you'll have) then more importantly the material and manner in which the BCG is made.
|
|
Gee whiz. Google arfcom to read the bunch of poop. Bottom line, I have owned and still own several, and have seen no deficiencies. They run great and are reliable. My friend and I have LR308s that shoot 1/2 MOA. I have 223's that shoot the same. Reliably. Thousands of rounds later. Still great.
Heck, I got a S&W M&P 15 from the Performance Center and the key was not staked. At all. All the DPMS I have seen are staked, for instance. While they are NOT the "first tier" like the "do-no-evil" Colts, they are great. Steel, shmeel, they shoot great. They could be the second largest AR manufacturer in the country, from what I have heard. Good quality, great price. Back when you could get them.
|
|
Quoted:
Have seen a few posts here and elsewhere concerning the quality of DPMS AR's. I have an M-4 and have no complaints whatsoever. Can someone please inform me of the drawbacks of these rifles. Thanks! Here we fuckin go In before the "my friend's friend had one and had tons of problems" |
|
Quoted: Says the guy with a "AimSurplus" avatar, the source of the four amazing "AR57, LLC" lowers that I bought that proved to be the worst dimensioned lowers I have ever seen. One hammer would not fit the radius, three would not fit stock grips, and three would NOT fit stock uppers that fit everything else. The lowers were literally too short for the uppers (three manufacturers)... Avoid them like the plague.I'm not sure what they use for barrel steel (likely won't matter for any use you'll have) then more importantly the material and manner in which the BCG is made. Generally, Aim has been a decent provided, other than these pieces of shyte.
|
|
OP google DPMS reviews. I don't belive you will get many people here in the tech section willing to trash your choice of ARs. Besides if your rifle works for you why do you care what others think.
Do like the rest of us do shoot your rifle and if something breaks fix it |
|
|
i've seen their CS rep on this site call a customer a liar, eat a fat plate of crow and then disappear completely.
|
|
I'd be dating enough to say that any problems you encounter will likely be mag or ammo related.
Dpms is ok in my book. Stock triggers are hard but otherwise I've not seen an issue. |
|
|
|
It's a gun. If it goes bang, shoot it.
If you're worried about it, things I would check/change: Make sure the staking is good on the carrier key. Check the extractor spring for the proper black insert, and if you want, the o-ring. Check staking on the receiver end plate. I personally really dislike commercial-size receiver extensions and would change that out for a 7075 aluminum "mil-spec" size. Other than that, it's probably fine. Replace stuff as it breaks as you would. If you're ultra-paranoid, replace the bolt with an individually MPI'ed one but that's probably over kill for most people. Enjoy the new gun. |
|
Quoted:
Have seen a few posts here and elsewhere concerning the quality of DPMS AR's. I have an M-4 and have no complaints whatsoever. Can someone please inform me of the drawbacks of these rifles. Thanks! Do a search. This topic has been done to death. |
|
I will try to get you as objective answer as possible. DPMS they make many many rifles they are one of the top numbers producers. I have used parts from them and helped friends build rifles with uppers from them. Only problem I can report with the DPMS stuff I have seen the single stage triggers are gritty and ehhh..... and my friend when he got his upper(from Midway) his gas tube was bent slightly not allowing the BCG to go into battery fully straightened the gas tube and the rifle has not missed a lick. Would I buy one probably not..... why because for a little more money or about the same cost you can get a better spec rifle (Spikes, RRA, Stag, Del-ton, DSA etc or spend a little more get a Colt) My .02 take for what it is worth but you will not see a whole lot of love for DPMS but in these times it may be the only thing you can find.
|
|
As a casual shooter you want be able to tell any difference. The DPMS / Bushmasters I honestly don't think can take repeated abuse like your Colts, LMTs, Noveskes, ect but hell, for the price they are a they work ok. I have owned a DPMS and the 200 rounds that I put through it before I sold it to my girlfriend's dad went really well and I think he has maybe put 100 through it since then. I had a Bushmaster that I maintained very well but starting having minor problems after about 5500 rounds.
What will tell you the most is the materials used by DPMS... they assemble enough rifles to know what they are doing there. |
|
From my experience DPMS does not have good quality control. I would never buy anything made by DPMS again.
|
|
I've heard people complain and I have heard people praise DPMS. I have built several AR's in the past and have owned many in the past 25 years. I'll say this;
I bought a new DPMS M4'gery yesterday. The M4 Chart needs to be updated from what I have seen on my new rifle. My new DPMS has a chrome lined bore, M4 feed ramps, properly staked carrier bolts and an absolutely amazing trigger! Smooth pull and a crisp break, just beautiful. This baby is put together very well. QC looks to be spot on. I'll be doing a more detailed strip and inspection this weekend (hopefully) but so far I am pretty impressed. |
|
I have a custom DPMS varminter, and I love the thing. I have upgraded a few things like the BCG, charging handle etc. but even before this a few thousand rounds flew out of it with no problem. But if I had the money then I would have bought higher end.
|
|
I've had my AP-4 for six years and have never had so much as a hiccup after 5K+ rounds...
|
|
I've had several uppers from DPMS, never any problem, and my 24" bull barrel upper I got on a closeout from Midway is amazinly accurate, better than any bolt gun I've ever had
|
|
Quoted:
Have seen a few posts here and elsewhere concerning the quality of DPMS AR's. I have an M-4 and have no complaints whatsoever. Can someone please inform me of the drawbacks of these rifles. Thanks! I never owned a DPMS rifle, but I've handled plenty of them when I used to work part time at a gunshop. Never had any come back with problems, never had any complaints from customers. The fit and finish on them always was spot on. Now the parts they sell, seem to be be another story. I personally have had issues with parts not fitting on ocasion (being out of spec), had issues with a couple safety selector detent holes drilled to deep, and I had a bolt break about 10 years ago at the cam pin hole. I have also heard of others having problems with "parts". This almost leads me to believe that the spare parts are possibly seconds or they just have poor QC (with the spare parts) or because they sell so many small parts, a few slip through the cracks. |
|
Sounds like a classic case of quality control. I was online at wally world yesterday buying one of 2 Colt 6920 magpul's they had and the guy next to me
Said he enjoys his and has had no problems.......his friends DPMS has had all sorts of problems. |
|
ive got approx. 2000rds on a dpms lpk i got in november and no problems to date. no fitting issues whatsoever
|
|
Quoted:
I've heard people complain and I have heard people praise DPMS. I have built several AR's in the past and have owned many in the past 25 years. I'll say this; I bought a new DPMS M4'gery yesterday. The M4 Chart needs to be updated from what I have seen on my new rifle. My new DPMS has a chrome lined bore, M4 feed ramps, properly staked carrier bolts and an absolutely amazing trigger! Smooth pull and a crisp break, just beautiful. This baby is put together very well. QC looks to be spot on. I'll be doing a more detailed strip and inspection this weekend (hopefully) but so far I am pretty impressed. Yes it needs to be updated but probaly won't... hk-sigman, your AP4 has a (now standard) 4150 chrome-lined barrel, M4 ramps ect... Truth is we have been using 4150 when 4140 was unavailable thoughtout the years but never made a big deal out of it... black1970, thanks for your buisness we appreciate it! |
|
My brothers friend sister dad friend of a friend grandfather sons half brother has a dpms with so many problems.... On a serious note, my dpms hasn't had issues and shoots great. The quality and finish are great.
|
|
compared to other makers in the same budget the fit is wanting, most complaints can be fixed by going to magpul furniture but that can be expensive, I love thier 308s and every DPMS I have shot has been very accurate. but they often are problematic with surplus ammo.
|
|
I would pick a DPMS over a RRA.
I even like the "cool crosshair cat" they put on the side. And I especially like they way thier owner fights for his workers jobs... Before a clueless state assembly. |
|
Mine run fine, but they aren't the 'soup of the day' to the arfcom tier 1 couch commandos.
They do have some fugly plastic these days, but everyone changes that 5 minutes after they buy a rifle. |
|
Quoted:
I would pick a DPMS over a RRA. I even like the "cool crosshair cat" they put on the side. And I especially like they way thier owner fights for his workers jobs... Before a clueless state assembly. That was not the owner. |
|
Purchased mine in 2006 and if your Colts and Noveskes are half as reliable as that DPMS has been, you're probably very happy.
|
|
I have an Oracle, and it's been reliable, but I've been collecting Ammo lately, and only got a few hundred rounds through it. Changes to Rifle are in order though, to make for a better, more reliable updated Rifle. I just didn't pay for the amendities upfront. Over time it'll get it to the way I want it.
No, it doesn't have a CL barrel. Honestly do you really need one. Not, if you're a Casual Shooter. Only if you shoot thousands of rounds a Year or doing a Gun Shooting Course, does a CL Barrel/Extension become beneficial. Still, is it needed----? Does it have a Trigger that leaves alot to be desired. Hell Yes, but still being a Mil-Spec Trigger, that's what you get. Get off this shit, that you think it must have to have a 2.5# Target Trigger pull with non-existant creep . It's what it is---no more/less. Want a better Trigger----get an Aftermarket Trigger. DPMS might only do a Batch Tested Bolt/Carrer, but it still works, and works well, as long as you don't Mag Dump often, or shoot thousands of rounds in one sitting. If this is case then, getting a better BCG would be a wise decision in my opinion. Still, as a stock BCG, it may work very reliability for years afterwards, even doing this. If you have a Carbine Model, yes you (might) get some overgassing issues. Get a heavier Buffer, Adjustable Gas Block, or possibly different gas tube and problem should be solved. Just go to the (Industr)y area of Forum, and look over some of the Facts/Myths of DPMS. You might be surprised if you owned an older DPMS compared with changes of new DPMS. Remember you Can/Could/Will/Maybe/Might/Should/Won't have problems with any Rifle/Gun-----no matter Name or what you paid for it. Don't be afraid to purchase a DPMS. They make and sell AR's and parts, that are just as Mil-Spec as lots of other AR's. They supply/manufacturer many parts that other AR Manufacturers use, and that's why I think, they can keep their pricing lower. Doesn't necessarily mean it's an inferior part. Problem is, not many parts to choose from right now. Hopefully soon. |
|
Just got my first DMPS at the gunshow today can wait to put some rounds through it!
|
|
Quoted:
Just got my first DMPS at the gunshow today can wait to put some rounds through it! Congrats. Shoot, enjoy, change out components to your liking and shoot some more. What model? |
|
ap4 carbine. plans are dark earth furniture, polish the trigger myself and lighter trigger spring, already have a red dot for it.
|
|
I have owned one. I have no complaints. If you like it than that is all that matters.
|
|
Depends as you never know with DPMS. You might get a good one or you might get a bad one. You just have to shoot one to determine the quality, obviously. Just like with any other gun. I'm neutral on the subject, however, & not bashing them.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.