User Panel
User Panel
User Panel
|
Posted: 9/15/2014 11:30:49 PM EDT
[Last Edit: Augee]
[#1]
Quote HistoryOriginally Posted By twitch1706:
I had a similar stock in my rifle's early days; it was marked S&W. I snagged it from a buddy who said he had no clue where it came from. http://i621.photobucket.com/albums/tt298/twitch1706/DSCN3150.jpg Quote HistoryOriginally Posted By twitch1706:
Originally Posted By Augee:
Originally Posted By strm_trpr:
Generic M4 stock, dunno had it in my parts bin, it is more correct than the MOE I had on the lower before. I am still looking for a decent price on a SOPMOD. Interesting, it has a commercial radius forward of the latch, but otherwise looks like a military-style stock - never seen one quite like it before. ~Augee I had a similar stock in my rifle's early days; it was marked S&W. I snagged it from a buddy who said he had no clue where it came from. http://i621.photobucket.com/albums/tt298/twitch1706/DSCN3150.jpg That one is a fairly conventional "commercial mold" M4-style stock - there are a bunch of detail differences, but the easiest to see is to compare the sling swivel slot on your stock versus the one on strm_trpr's Troy stock. Anyways, doesn't really make that much of a difference - just an interesting combination of features I hadn't seen before, as I haven't really looked closely at the T-22. ~Augee |
|
|
|
|
Posted: 9/15/2014 11:44:12 PM EDT
[#2]
Two recent finished builds. First one is a 14.5 pinned to 16 that I rattle-canned Kryptek. The second one is a recent build for my wife. Both are reposts just not in this thread.
The rattle can build was starting to be one of the guns I picked up the most to shoot, nearly beating out my 10.5 SBR. Pics... 
|
|
|
|
|
Posted: 9/16/2014 12:56:32 AM EDT
[#3]
Quote HistoryOriginally Posted By Augee: That one is a fairly conventional "commercial mold" M4-style stock - there are a bunch of detail differences, but the easiest to see is to compare the sling swivel slot on your stock versus the one on strm_trpr's Troy stock. Anyways, doesn't really make that much of a difference - just an interesting combination of features I hadn't seen before, as I haven't really looked closely at the T-22. ~Augee Ah, well. I tried  |
|
|
|
|
Posted: 9/16/2014 9:41:40 AM EDT
[#4]
Quote HistoryOriginally Posted By twitch1706:
Ah, well. I tried Quote HistoryOriginally Posted By twitch1706:
Originally Posted By Augee:
That one is a fairly conventional "commercial mold" M4-style stock - there are a bunch of detail differences, but the easiest to see is to compare the sling swivel slot on your stock versus the one on strm_trpr's Troy stock. Anyways, doesn't really make that much of a difference - just an interesting combination of features I hadn't seen before, as I haven't really looked closely at the T-22. ~Augee Ah, well. I tried
Like I said, it's not as if it makes any difference, just a little observation. Back to regularly scheduled 14.5" pinned to 16" content... ~Augee |
|
|
|
OH, USA
|
Posted: 9/21/2014 9:56:27 PM EDT
[Last Edit: Riddle]
[#5]
...
|
|
|
|
Posted: 9/22/2014 9:36:21 AM EDT
[#6]
|
|
|
|
|
Posted: 9/22/2014 10:10:22 AM EDT
[#7]
--Parts List: -Upper: - BCM Blemished Upper Receiver kit - BCM Mod A44 Ambidextrous Charging Handle* - BCM 13" KMR* - Rainier Arms 14.5" Mid length wylde match series barrel & match gas block - Rainier Arms XTC Compensator (this will be mailed to R.A. when barrel order is made to be pinned)* - Rainier Arms Nib BCG - MagPul MBUS* Lower: - Aero stripped lower - PSA LPK w/o FCG* - ALG Combat Trigger* - VLTOR 7pos A5 Buffer tube/spring* - Magpul ACS-L Mil Spec Stock* - Magpul B.A.D. Lever* - Magpul MIAD Pistol Grip* - Magpul MS4 Sling* Misc: - BCM Keymod QD Sling attachment* - Odin Works Keymod 1" light attachment* - Surefire G2X Pro* - 2 Sets of Noveske NSR Keymod Rail Covers* |
|
|
|
MO, USA
|
Posted: 9/28/2014 7:55:56 PM EDT
[#8]
Bump
|
|
|
|
Posted: 9/28/2014 9:24:50 PM EDT
[#9]
Upper: Aero Precision Upper KAC URX 3.1 13.5" Rail KAC Micro Sights 14.5" Stainless Steel Mid Length Barrel by Nefarious Arms/Marvin Pitts BattleComp 1.5 Aim Surplus Nickel Boron BCG w/ Rainer Arms Nickel Boron Bolt BCM Gunfighter MOD 4 Lower: Aero Precision X15 Lower LMT SOPMOD Magpul MOE K2 Optic: TA31-D-100310 LaRue ACOG RCO Mount |
|
|
|
MI, USA
|
Posted: 9/28/2014 11:38:38 PM EDT
[#10]
Home made front charging handle, JMT poly lower pined to upper at the rear, Titanium comp welded over the pins, barrel and comp still need paint, folding pistol grip, carbon stock home made as is the mounting for the carbon hand guard, adjustable gas block reached from the front. Shaved off forward assist and deleted dust door.
|
|
|
|
Posted: 9/28/2014 11:49:41 PM EDT
[#11]
My 14.5" carbine at the range today. |
|
|
|
CA, USA
|
Posted: 9/28/2014 11:56:55 PM EDT
[#12]
|
|
|
|
Posted: 9/28/2014 11:59:54 PM EDT
[Last Edit: jukeboxx13]
[#13]
Keymod is taking over this page.   |
|
|
|
CA, USA
|
Posted: 9/29/2014 3:28:41 PM EDT
[#14]
Quote HistoryIs it possible to make a gun look new again after spray painting it? |
|
|
|
Posted: 9/29/2014 4:28:05 PM EDT
[Last Edit: jukeboxx13]
[#15]
Quote HistoryOriginally Posted By emtothedee: Is it possible to make a gun look new again after spray painting it? Quote HistoryOriginally Posted By emtothedee: Is it possible to make a gun look new again after spray painting it? I'd have to be snowed in which we both know wont happen. |
|
|
|
|
Posted: 9/29/2014 4:56:23 PM EDT
[#16]
Quote HistoryOriginally Posted By emtothedee:
http://i1246.photobucket.com/albums/gg607/emtothedee/null_zpse530e318.jpg overkill
|
|
|
|
USA
|
Posted: 9/30/2014 2:27:16 AM EDT
[Last Edit: DannerTrax]
[#17]
Quote HistoryOriginally Posted By jukeboxx13:
Yes, but takes too much work imo. I'd have to be snowed in which we both know wont happen. Quote HistoryOriginally Posted By jukeboxx13:
Originally Posted By emtothedee:
Is it possible to make a gun look new again after spray painting it? I'd have to be snowed in which we both know wont happen. Clean Strip spray, 5 mins later, hose with water, done. DannerTrax |
|
|
|
Posted: 9/30/2014 2:29:42 AM EDT
[#18]
Quote HistoryOriginally Posted By DannerTrax: Clean Strip spray, 5 mins later, hose with water, done. DannerTrax Quote HistoryOriginally Posted By DannerTrax: Originally Posted By jukeboxx13: Originally Posted By emtothedee: Is it possible to make a gun look new again after spray painting it? I'd have to be snowed in which we both know wont happen. Clean Strip spray, 5 mins later, hose with water, done. DannerTrax I feel the barrel would still have paint on it.
|
|
|
|
|
Posted: 9/30/2014 9:55:00 PM EDT
[#19]
Quote HistoryOriginally Posted By jclaypool:
Two recent finished builds. First one is a 14.5 pinned to 16 that I rattle-canned Kryptek. The second one is a recent build for my wife. Both are reposts just not in this thread. The rattle can build was starting to be one of the guns I picked up the most to shoot, nearly beating out my 10.5 SBR. Pics... <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1592_zpsc9b35629.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1592_zpsc9b35629.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1598_zps3f19792e.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1598_zps3f19792e.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG953690_zps11ebd5ea.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG953690_zps11ebd5ea.jpg</a> Oh god, hide that Tiffany AR. If my girl sees that my bank account is done! |
|
|
|
USA
|
Posted: 9/30/2014 10:39:05 PM EDT
[#20]
I only used it once on some hand-me-down gear, a Surefire M900 grip light with a couple coats of Krylon. It took almost everything off in one pass and didn't harm the metal, plastic, or rubber. I did have to make one more pass with a cleaning brush on the more dynamic surfaces and angles. But Cleanstrip it potent so read the warning labels about ventilation and skin contact.. DannerTrax
|
|
|
VA, USA
|
Posted: 10/18/2014 5:43:21 PM EDT
[#21]
|
|
|
IL, USA
|
Posted: 10/18/2014 8:54:18 PM EDT
[#22]
Quote HistoryOriginally Posted By RuKuS:
M4 14.5" barrel with pinned A2ext flash hider, upper by BCM http://img.photobucket.com/albums/v664/rjszurgot/100_1352.jpg What stock is that? |
|
|
|
Posted: 10/18/2014 9:37:40 PM EDT
[#23]
Quote HistoryOriginally Posted By CAP93:
What stock is that? Quote HistoryOriginally Posted By CAP93:
Originally Posted By RuKuS:
M4 14.5" barrel with pinned A2ext flash hider, upper by BCM http://img.photobucket.com/albums/v664/rjszurgot/100_1352.jpg What stock is that? Ace ltd. makes it. Don't remember the exact model. |
|
|
|
|
Posted: 11/1/2014 1:17:35 PM EDT
[Last Edit: 175BFD]
[#24]
Thoughts on removing a pinned Izzy Brake from a Bushmaster upper? I had a smith tell me it is a real pain in the ass to do without damaging the threads. I want to add a Free float rail but not sure its worth it to send out and have done.
The other thought was to add either a Magpull hand guard or a drop in DD EZ Car rail. Opinions? |
|
|
|
AZ, USA
|
Posted: 11/2/2014 9:59:03 AM EDT
[Last Edit: RParker762]
[#25]
Quote HistoryOriginally Posted By 175BFD:
Thoughts on removing a pinned Izzy Brake from a Bushmaster upper? I had a smith tell me it is a real pain in the ass to do without damaging the threads. I want to add a Free float rail but not sure its worth it to send out and have done. The other thought was to add either a Magpull hand guard or a drop in DD EZ Car rail. Opinions? I have only done one so far. I guestimated the thickness of the FH and drilled ontop of the pin. Then extremely slowly I used a cutoff wheel on the dremel to slowly cut a notch into the FH to the depth I though it needed to be. Once i cut the FH in half on one side, I hammered a flat head into the cut and slowly unthreaded it. I did end up going a little too deep and cut into the tops of the threads at one point but I got lucky and the new FL installed perfectly. Its doable and I wouldn't hesitate doing it again but go slowly and keep trying it to avoid going to deep. Or do what I did on a subsequent build was bought a VLTOR CASV-EL and called it a day. Free floating and a nice handguard to boot. The DD EZCAR is a good rail too. Ran one for about a year. |
|
|
WI, USA
|
Posted: 11/2/2014 8:09:21 PM EDT
[#26]
|
|
|
TX, USA
|
Posted: 11/3/2014 7:06:01 PM EDT
[#27]
|
|
|
|
Posted: 11/3/2014 7:20:20 PM EDT
[#28]
Quote HistoryOriginally Posted By TannerB:
<a href="https://flic.kr/p/pDktbZ" target="_blank">https://farm6.staticflickr.com/5611/15518714609_76d69fb997_c.jpg</a>20141103_151232_1 by tb5252, on Flickr Oh my! |
|
|
|
|
Posted: 11/3/2014 11:12:59 PM EDT
[#29]
 DSC_2292 by jamiehstanley, on Flickr
 DSC_2291 by jamiehstanley, on Flickr
 DSC_2294 by jamiehstanley, on Flickr
|
|
|
|
HI, USA
|
Posted: 11/3/2014 11:21:46 PM EDT
[#30]
|
|
|
OH, USA
|
Posted: 11/4/2014 10:28:22 AM EDT
[#31]
She tucks away nicely in this case. |
|
|
|
Posted: 11/5/2014 1:15:54 PM EDT
[#32]
Built this M4ergy back in 08' as my retirement gift to myself. Stag lower, Colt 14.5" bbl with perm/weld Phantom FH.
With M9 attached when I built it. 
With TA31 ACOG attached 
with AN/TWS-13 attached 
CD |
|
|
|
|
Posted: 11/5/2014 1:39:25 PM EDT
[Last Edit: Combat_Diver]
[#33]
Quote HistoryJJREA, nice KISS carbine! CD |
|
|
|
|
Posted: 11/5/2014 1:39:55 PM EDT
[Last Edit: Combat_Diver]
[#34]
Nice ARs guys!
CD |
|
|
|
WI, USA
|
Posted: 11/5/2014 3:14:40 PM EDT
[Last Edit: JJREA]
[#35]
Quote HistoryOriginally Posted By Combat_Diver:
JJREA, nice KISS carbine! CD Quote HistoryOriginally Posted By Combat_Diver:
JJREA, nice KISS carbine! CD Thank you. I like it too. Technically it's my Dad's. But he never shoots it and I was planning on cleaning it up for him. We used to shoot a lot together and I know he hadn't cleaned it since. I also started a thread about shooting it. You might have some good input: badeyes Your set up is ideal!!! For any situation. Night or day. 
|
|
|
|
Posted: 11/5/2014 7:46:43 PM EDT
[#36]
Quote HistoryOriginally Posted By Combat_Diver:
Built this M4ergy back in 08' as my retirement gift to myself. Stag lower, Colt 14.5" bbl with perm/weld Phantom FH. With M9 attached when I built it. http://www.hunt101.com/data/500/medium/M4_build_with_M9.jpeg With TA31 ACOG attached <a href="http://www.servimg.com/view/16485401/817" target="_blank">http://i48.servimg.com/u/f48/16/48/54/01/ar_wit10.jpg</a> with AN/TWS-13 attached <a href="http://www.servimg.com/view/16485401/1047" target="_blank">http://i56.servimg.com/u/f56/16/48/54/01/dscf2011.jpg</a> CD Very nice, I like the hell out of that carbine. |
|
|
|
CA, USA
|
Posted: 11/5/2014 8:39:14 PM EDT
[#37]
|
|
|
|
Posted: 11/5/2014 10:14:29 PM EDT
[#38]
Quote HistoryOriginally Posted By ARKAR:
Very nice, I like the hell out of that carbine. Quote HistoryOriginally Posted By ARKAR:
Originally Posted By Combat_Diver:
Built this M4ergy back in 08' as my retirement gift to myself. Stag lower, Colt 14.5" bbl with perm/weld Phantom FH. With M9 attached when I built it. http://www.hunt101.com/data/500/medium/M4_build_with_M9.jpeg With TA31 ACOG attached <a href="http://www.servimg.com/view/16485401/817" target="_blank">http://i48.servimg.com/u/f48/16/48/54/01/ar_wit10.jpg</a> with AN/TWS-13 attached <a href="http://www.servimg.com/view/16485401/1047" target="_blank">http://i56.servimg.com/u/f56/16/48/54/01/dscf2011.jpg</a> CD Very nice, I like the hell out of that carbine. Built it to mirror what I carried for years in the service. Worked for me then and now. The TWS-13 was burrowed from the manufacture before I went over to Thailand this year to teach them how to use it, wish I could have kept it of course! CD |
|
|
|
|
Posted: 11/23/2014 8:19:55 PM EDT
[#39]
|
|
|
|
PA, USA
|
Posted: 11/23/2014 8:28:42 PM EDT
[#40]
Quote HistoryOriginally Posted By CtSmshr:
http://i1285.photobucket.com/albums/a584/GudOlBoy1/20141122_142737_zpsfbdfaaef.jpg Nice Setup. |
|
|
|
Posted: 11/24/2014 10:11:32 AM EDT
[#41]
Terrible pic of my 14.5s, a parts-built KISS carbine w/ PA red dot and VTAC rail, and my mini-recce, a BCM 14.5" upper w/ PA 1-6 ACSS scope. |
|
|
|
TX, USA
|
Posted: 12/8/2014 1:29:10 PM EDT
[#42]
|
|
|
|
Posted: 1/17/2015 3:18:10 AM EDT
[Last Edit: jukeboxx13]
[#43]
This thread went back 29 pages.
Heres a bump  |
|
|
|
|
Posted: 1/17/2015 3:34:08 AM EDT
[#44]
|
|
|
|
|
Posted: 1/17/2015 10:53:03 AM EDT
[#45]
Quote HistoryOriginally Posted By jukeboxx13:
This thread went back 29 pages. Heres a bump http://i.imgur.com/CUBo7mp.jpg?2 Nice rifle. |
|
|
|
FL, USA
|
Posted: 1/17/2015 10:59:37 AM EDT
[#46]
My pair, (yes, sh*tty phone pics
)
Specs; Top: Upper I bought off the EE, DD 14.5" CHF barrel, carbine gas, pinned A2X, has a BCM BCG and Mod 4 charging handle; bought it about 3.5 years ago, added the R1 with IO cover on LT 660 and DD A1.5, came with the MI gas block mount, swapped a TLR1 for the G2L in a GG&G ring, VTAC padded sling, and went through a CAR handguard, MOE, back to CAR, and now to the MOE-SL, which is awesome. Usually on a Doublestar lower built with a DSG moe stock kit (great CS), H2 buffer, and AIM surplus stainless LPK. In the picture I think that's one of my Bushmaster lowers. AIM stainless has the best trigger of my 4 lowers. This is my trust-with-my-life-rifle. As it sits I think I have $1450 in it. Bottom: Bushmaster factory MOE Patrolman lower and sling, BCM 14.5" standard midlength, pinned A2X, MOE handguards with IWC light mount and G2X-Tac, MBUS rear and Primary Arms PAC4x on ADM QD mount. I have a total of $967 in this rifle as it sits. 
|
|
|
|
Posted: 1/17/2015 11:36:16 AM EDT
[#47]
Current set up
|
|
|
|
|
Posted: 1/17/2015 3:11:27 PM EDT
[Last Edit: CtSmshr]
[#48]
My pinned 14.5 family
|
|
|
|
|
Posted: 1/17/2015 5:26:04 PM EDT
[#49]
|
|
|
|
|
Posted: 1/17/2015 5:28:49 PM EDT
[#50]
Quote HistoryOriginally Posted By Jamiehstanley:
Another SWVA 14.5 <a href="https://flic.kr/p/oZ3MhA" target="_blank">https://farm4.staticflickr.com/3952/15085431734_e3fc978d8e_b.jpg</a>DSC_2291 by jamiehstanley, on Flickr <a href="https://flic.kr/p/pDt2s6" target="_blank">https://farm8.staticflickr.com/7565/15520188917_854c1d155b_b.jpg</a>DSC_2292 by jamiehstanley, on Flickr I know they're all the same, but that BAD lever looks strangely familiar...... 
Nice rifle bro. Nice sling too! |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
