User Panel
Originally Posted By js1977:
Got it! This is my MK12 "inspired" rifle, maybe one day it will promote to the rank of clone. Due to a limited budget I wasn't able to go 'full clone' so this became a "inspired" MK12 rifle. The paint is still drying and may need a few touch ups, haha! Here are the details Upper Receiver- BCM SS410 18" 1/8 twist RURG w/ BCM KMR-*ALPHA* 15" Handguard w/ 3 KAC keymod aluminum 12" rails BCM bolt carrier group/auto PRI Gas Buster charging handle KAC forward grip (used during service) KAC rail covers Lower Receiver- ArmaLite M-15 lower BCM buffer/buffer tube/buffer spring BCM QD end plate B5 Systems Enhanced SOPMOD buttstock BCM GUNFIGHTER Mod 3 grip ArmaLite LPK Trigger- Geissele SSA trigger Optic- Leupold Mark Ar Mod1 3-9X40mm TMR Illuminated w/ A.R.M.S. #22 high mount rings, A.R.M.S. #37 ring inserts Iron Sights- KAC Offset front/rear 200-600m Sights Bipod-HBRMS Harris Bipod 6" to 9" leg notches w/ KAC MWS Rail Bipod Adapter Silencer- AAC M4-2000 (once ATF sends stamp) w/ AAC Brakeout 2.0 51t (I know, I know, booooo!, but it's what I already bought) <a href="http://s788.photobucket.com/user/jimmys120/media/58da7aac-949d-4ed6-aad4-32939eb2b25f_zpsqr6dxcfh.jpg.html" target="_blank">http://i788.photobucket.com/albums/yy166/jimmys120/58da7aac-949d-4ed6-aad4-32939eb2b25f_zpsqr6dxcfh.jpg</a> <a href="http://s788.photobucket.com/user/jimmys120/media/0821CB8D-9FE1-4C5E-A1B5-400D54B28AA2_zpscxt4kmfx.jpg.html" target="_blank">http://i788.photobucket.com/albums/yy166/jimmys120/0821CB8D-9FE1-4C5E-A1B5-400D54B28AA2_zpscxt4kmfx.jpg</a> View Quote View All Quotes View All Quotes Originally Posted By js1977:
Originally Posted By Zakk101abn:
Originally Posted By js1977:
Is it cool if I post a "inspired" MK12 rifle pic in here when I finish? Id say, and I think most will agree, you can post whatever you got. But if you're going to post in this thread, at least have the inclination or desire to make it more "clone appropriate" down the road ... We've all started somewhere. If you post stuff with the mentality that it's "better than clone- that's why I went with X instead of Y" then you probably will get some sort of flak, or just ignored. On that note, I'm interested to see your build. This is my MK12 "inspired" rifle, maybe one day it will promote to the rank of clone. Due to a limited budget I wasn't able to go 'full clone' so this became a "inspired" MK12 rifle. The paint is still drying and may need a few touch ups, haha! Here are the details Upper Receiver- BCM SS410 18" 1/8 twist RURG w/ BCM KMR-*ALPHA* 15" Handguard w/ 3 KAC keymod aluminum 12" rails BCM bolt carrier group/auto PRI Gas Buster charging handle KAC forward grip (used during service) KAC rail covers Lower Receiver- ArmaLite M-15 lower BCM buffer/buffer tube/buffer spring BCM QD end plate B5 Systems Enhanced SOPMOD buttstock BCM GUNFIGHTER Mod 3 grip ArmaLite LPK Trigger- Geissele SSA trigger Optic- Leupold Mark Ar Mod1 3-9X40mm TMR Illuminated w/ A.R.M.S. #22 high mount rings, A.R.M.S. #37 ring inserts Iron Sights- KAC Offset front/rear 200-600m Sights Bipod-HBRMS Harris Bipod 6" to 9" leg notches w/ KAC MWS Rail Bipod Adapter Silencer- AAC M4-2000 (once ATF sends stamp) w/ AAC Brakeout 2.0 51t (I know, I know, booooo!, but it's what I already bought) <a href="http://s788.photobucket.com/user/jimmys120/media/58da7aac-949d-4ed6-aad4-32939eb2b25f_zpsqr6dxcfh.jpg.html" target="_blank">http://i788.photobucket.com/albums/yy166/jimmys120/58da7aac-949d-4ed6-aad4-32939eb2b25f_zpsqr6dxcfh.jpg</a> <a href="http://s788.photobucket.com/user/jimmys120/media/0821CB8D-9FE1-4C5E-A1B5-400D54B28AA2_zpscxt4kmfx.jpg.html" target="_blank">http://i788.photobucket.com/albums/yy166/jimmys120/0821CB8D-9FE1-4C5E-A1B5-400D54B28AA2_zpscxt4kmfx.jpg</a> looks great.. lets get that rail swapped out for a KAC and then we'll work on that barrel. Paint is titties. |
|
|
Originally Posted By 44Echo10:
Thought it looked familiar, thanks. The Mark 4 is out of my price range. View Quote View All Quotes View All Quotes Originally Posted By 44Echo10:
Originally Posted By Zakk101abn:
What optic is this? Leupold Mark AR Mod 1 (I think) 3-9x Originally Posted By HaveBlue83:
-yes 3-9 mk ar, non ill, mil dot. Thought it looked familiar, thanks. The Mark 4 is out of my price range. People always say this, but just save $40 a pay period and (don't laugh) spare change. You would be surprised how quickly it adds up. 8 months and a deal on EE and BAM! It could be yours. |
|
|
Originally Posted By chenault: People always say this, but just save $40 a pay period and (don't laugh) spare change. You would be surprised how quickly it adds up. 8 months and a deal on EE and BAM! It could be yours. View Quote Take lunch or skip it a few days a week; eat cheap and prosper. |
|
"Not proud of everything I've done, but at least you know I did it well."
|
" />
|
|
|
Always check your 5 and 25 while watching your 6
TX, USA
|
Originally Posted By Zakk101abn: looks great.. lets get that rail swapped out for a KAC and then we'll work on that barrel. Paint is titties. http://i36.photobucket.com/albums/e21/zakk101abn/Mobile%20Uploads/ea43e99a-ef2f-486e-8bc7-6a250d235623_zpsr5hefqb5.jpg View Quote View All Quotes View All Quotes Originally Posted By Zakk101abn: Originally Posted By js1977: Originally Posted By Zakk101abn: Originally Posted By js1977: Is it cool if I post a "inspired" MK12 rifle pic in here when I finish? Id say, and I think most will agree, you can post whatever you got. But if you're going to post in this thread, at least have the inclination or desire to make it more "clone appropriate" down the road ... We've all started somewhere. If you post stuff with the mentality that it's "better than clone- that's why I went with X instead of Y" then you probably will get some sort of flak, or just ignored. On that note, I'm interested to see your build. looks great.. lets get that rail swapped out for a KAC and then we'll work on that barrel. Paint is titties. http://i36.photobucket.com/albums/e21/zakk101abn/Mobile%20Uploads/ea43e99a-ef2f-486e-8bc7-6a250d235623_zpsr5hefqb5.jpg |
|
Originally Posted By secretwheelman:
My SAM-R was funded one sammich at a time. Take lunch or skip it a few days a week; eat cheap and prosper. View Quote View All Quotes View All Quotes Originally Posted By secretwheelman:
Originally Posted By chenault:
People always say this, but just save $40 a pay period and (don't laugh) spare change. You would be surprised how quickly it adds up. 8 months and a deal on EE and BAM! It could be yours. Take lunch or skip it a few days a week; eat cheap and prosper. This right here, roughly $10-15 a day x 5 days, adds up quickly. |
|
|
Glad to see I'm not the only one that tries to save nickels and dimes for stuff.
I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. |
|
|
Originally Posted By TexasTerror:
Glad to see I'm not the only one that tries to save nickels and dimes for stuff. I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. View Quote There is a .308 Mod1 on page 763. Second pic back rifle. |
|
|
Originally Posted By chenault:
There is a .308 Mod1 on page 763. Second pic back rifle. View Quote View All Quotes View All Quotes Originally Posted By chenault:
Originally Posted By TexasTerror:
Glad to see I'm not the only one that tries to save nickels and dimes for stuff. I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. There is a .308 Mod1 on page 763. Second pic back rifle. Theres also one on 1163.... |
|
|
Originally Posted By Zakk101abn:
Theres also one on 1163.... View Quote View All Quotes View All Quotes Originally Posted By Zakk101abn:
Originally Posted By chenault:
Originally Posted By TexasTerror:
Glad to see I'm not the only one that tries to save nickels and dimes for stuff. I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. There is a .308 Mod1 on page 763. Second pic back rifle. Theres also one on 1163.... Right.......................wtf was I thinking. |
|
|
Originally Posted By chenault:
There is a .308 Mod1 on page 763. Second pic back rifle. View Quote View All Quotes View All Quotes Originally Posted By chenault:
Originally Posted By TexasTerror:
Glad to see I'm not the only one that tries to save nickels and dimes for stuff. I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. There is a .308 Mod1 on page 763. Second pic back rifle. I didn't see a 308 mod1 on 763. Where you talking about the lone survivor behind the seens pic? |
|
|
Originally Posted By Davey_Sickboy:
I didn't see a 308 mod1 on 763. Where you talking about the lone survivor behind the seens pic? View Quote View All Quotes View All Quotes Originally Posted By Davey_Sickboy:
Originally Posted By chenault:
Originally Posted By TexasTerror:
Glad to see I'm not the only one that tries to save nickels and dimes for stuff. I was debating between a aero 308 or MK12 mod 0 for my next build. Then it hit me to build a MK12 Mod 0 in 308. Obviously it won't be clone correct but it would look pretty close. Anyone have one? I found a few through Google search. There is a .308 Mod1 on page 763. Second pic back rifle. I didn't see a 308 mod1 on 763. Where you talking about the lone survivor behind the seens pic? I meant 1163. Newborn has me so tired I'm making all kind of mistakes. |
|
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
|
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
|
Double tap.
|
|
|
Originally Posted By ankratz: Buy this one!!!! SEAL RECCE HOLLAND MK12 MOD 308 For reals, I gots suppressorz to fund! http://i6.photobucket.com/albums/y229/akratz/001WTS/20160127_123739_zpsuat1ycxf.jpg View Quote Is that field drab paint? |
|
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
Originally Posted By RussellAthletic:
Is that field drab paint? View Quote View All Quotes View All Quotes Originally Posted By RussellAthletic:
Originally Posted By ankratz:
Buy this one!!!! SEAL RECCE HOLLAND MK12 MOD 308 For reals, I gots suppressorz to fund! http://i6.photobucket.com/albums/y229/akratz/001WTS/20160127_123739_zpsuat1ycxf.jpg Is that field drab paint? Color I came up with that mimics the original "Dark Earth" before Magpul FDE and the like became the standard. I call it "SOCOM Dark Earth" (real creative, eh?) It kind of matches Team Wendy coyote, or LMT FDE on the SOPMODs |
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/279084_mod02.jpg What? No green on green tiger stripe?! (Despite how green this looks, it's rust-oleum khaki and brown...) View Quote UGH hot damn, that looks good. I was thinking this is some disruptive Predator shit, and then I saw your avatar....perfect :) |
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
Well fellas, awhile back I parted with my Mk 12 Mod 1 upper in anticipation of my daughters arrival. Now that things have settled down I'm looking to get back into the clone game, this time with a Mod H. I've been lurking this thread the past few weeks and have already ordered the Barrel, brake and collar. Does anyone have a good recommendation as to where would be the best place to find the PRI Gen III handguard? I wouldn't mind buying used either, Much thanks in advance! The knowledge shared in this thread is amazing and incredibly helpful.
|
|
|
Originally Posted By ankratz:
Buy this one!!!! SEAL RECCE HOLLAND MK12 MOD 308 For reals, I gots suppressorz to fund! <a href="http://s6.photobucket.com/user/akratz/media/001WTS/20160127_123739_zpsuat1ycxf.jpg.html" target="_blank">http://i6.photobucket.com/albums/y229/akratz/001WTS/20160127_123739_zpsuat1ycxf.jpg</a> View Quote Haha what handgaurd is that? |
|
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
Originally Posted By JoinTheRukus:
Well fellas, awhile back I parted with my Mk 12 Mod 1 upper in anticipation of my daughters arrival. Now that things have settled down I'm looking to get back into the clone game, this time with a Mod H. I've been lurking this thread the past few weeks and have already ordered the Barrel, brake and collar. Does anyone have a good recommendation as to where would be the best place to find the PRI Gen III handguard? I wouldn't mind buying used either, Much thanks in advance! The knowledge shared in this thread is amazing and incredibly helpful. View Quote I stalked the EE for mine and ended up buying used. If I was going to buy new, I think BCM may have the best deal. Their version includes an extra (long) rail. (2 shorts, 2 longs) If it's of interest to you. Or, sell one long and lower your investment cost. |
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
Originally Posted By TexasTerror:
Haha what handgaurd is that? View Quote View All Quotes View All Quotes Originally Posted By TexasTerror:
Originally Posted By ankratz:
Buy this one!!!! SEAL RECCE HOLLAND MK12 MOD 308 For reals, I gots suppressorz to fund! <a href="http://s6.photobucket.com/user/akratz/media/001WTS/20160127_123739_zpsuat1ycxf.jpg.html" target="_blank">http://i6.photobucket.com/albums/y229/akratz/001WTS/20160127_123739_zpsuat1ycxf.jpg</a> Haha what handgaurd is that? Daniel Defense LITE 762 I actually found that rail in the EE, and impulsively thought "man, those are super rare anymore for AR10 patterns...I should build an AR10 around it" $2k later............. |
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
|
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/279084_mod02.jpg What? No green on green tiger stripe?! (Despite how green this looks, it's rust-oleum khaki and brown...) View Quote Shits dope! |
|
|
Originally Posted By Zakk101abn:
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/279084_mod02.jpg What? No green on green tiger stripe?! (Despite how green this looks, it's rust-oleum khaki and brown...) Shits dope! |
|
|
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. View Quote What brand and model A2 buttstock sling attachment is that? |
|
Marine Security Force - White House Communication Agency - '95 - '96
3rd Battalion 8th Marines 8th Marines Rifle and Pistol Team |
Originally Posted By unrgop:
What brand and model A2 buttstock sling attachment is that? View Quote View All Quotes View All Quotes Originally Posted By unrgop:
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. What brand and model A2 buttstock sling attachment is that? http://www.maxprotactical.com/Gear_Sector_Fixed_Stock_Sling_Adapter_p/gs-2400.htm Gear Sector GS-2420 |
|
|
Off the record, I love your new bangs, Mrs. Obama
OR, USA
|
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. View Quote After all my Holland browsing today, this will now be the third pair of underpants I've had to change. |
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
Originally Posted By ankratz:
After all my Holland browsing today, this will now be the third pair of underpants I've had to change. View Quote View All Quotes View All Quotes Originally Posted By ankratz:
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. After all my Holland browsing today, this will now be the third pair of underpants I've had to change. |
|
|
Originally Posted By Hunterex: http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. View Quote Optic? Looks nice painted. *runs off to play with his holland* |
|
|
Originally Posted By HaveBlue83:
Optic? Looks nice painted. *runs off to play with his holland* View Quote View All Quotes View All Quotes Originally Posted By HaveBlue83:
Originally Posted By Hunterex:
http://img.pixady.com/2016/02/134276_newmod0.jpg Tried to keep it as Zakk's as possible. Optic? Looks nice painted. *runs off to play with his holland* Cheap PA 4-16x44 beater I've had lying around. Will put something real on it closer to the season when my strangled wallet breathes again. |
|
|
Originally Posted By ankratz:
I stalked the EE for mine and ended up buying used. If I was going to buy new, I think BCM may have the best deal. Their version includes an extra (long) rail. (2 shorts, 2 longs) If it's of interest to you. Or, sell one long and lower your investment cost. View Quote Thank you for the info! I've been stalking the EE for the past week or so and continually fight the urge for instant gratification at the expense of my cc. Up until now I was unaware of BCM's rail package, good bit of info to know especially since they were roughly $10 more than some other retailers. For now I will keep eyes peeled on the EE. |
|
|
Looking for an optic for my Mod 1. I've got around $1300 to spend. What do you guys suggest? Trying to decide if I drop it all on glass or save some of it to pick up an Aem5... Is the NF the way to go over the Leupold? I've been doing a bunch of research but figured this is the place to come for everything mk12. I've never owned anything higher end than a Vortex PST (which I know isn't high end). I'm currently thinking NF 2.5-10x32 w/ a Larue mount. I'm open to suggestions. Trying to stay as clone correct as possible but I'd like to get as much bang for my buck as I can!
|
|
|
What you're thinking is exactly what I did. NF 2.5-10x32 in lt-104 is tits. Strongly support and highly recommend. Range I shoot at has steel every 100 or so out to 1000m. No problem making first shot hits to 700.
You're at a difficult juncture not having an arm 5 yet. If you already have the KAC 99051 and kac rear buis I say get the wait started on the aem5 asap. Use your open sights for now and save pennies for glass/mount. |
|
I wouldn't say I'm a gun nut... but I'd consider extreme enthusiast.
|
Originally Posted By JohnStoner:
What you're thinking is exactly what I did. NF 2.5-10x32 in lt-104 is tits. Strongly support and highly recommend. Range I shoot at has steel every 100 or so out to 1000m. No problem making first shot hits to 700. You're at a difficult juncture not having an arm 5 yet. If you already have the KAC 99051 and kac rear buis I say get the wait started on the aem5 asap. Use your open sights for now and save pennies for glass/mount. View Quote That's the thing. I've got everything to make the build operation except buis and optic. I could go buis and suppressor or optic and mount right now... |
|
|
Originally Posted By cbfurg:
Looking for an optic for my Mod 1. I've got around $1300 to spend. What do you guys suggest? Trying to decide if I drop it all on glass or save some of it to pick up an Aem5... Is the NF the way to go over the Leupold? I've been doing a bunch of research but figured this is the place to come for everything mk12. I've never owned anything higher end than a Vortex PST (which I know isn't high end). I'm currently thinking NF 2.5-10x32 w/ a Larue mount. I'm open to suggestions. Trying to stay as clone correct as possible but I'd like to get as much bang for my buck as I can! View Quote Depends on the kind of mod1 your going for. Let's admit....look is everything with these rifles. Function wise....nxs is the way to go. Better glass, more magnification. 2.5-8 Leupy is what was issued with these and are on the majority of mod1's in pics from the wild....not to mention Lone Survivor and American Sniper. It wasn't Hollywood that came up with which glass was used on the rifles from those movies....they were seals. And I've never seen a 3.5-10 issued on one, only put on by the operator. So, it really comes down to what kind of mod1 YOU want to own. After shooting out to 600 yds, the 2.5-8 is growing on me. Wasn't a fan at first, because I do mostly benchrest shooting. But it is lighter and less bulky than my 3.5-10, but not as good for grouping on paper I think. If I were to pick out of anything. ...3.5-15nxs all day |
|
|
Originally Posted By Davey_Sickboy:
Depends on the kind of mod1 your going for. Let's admit....look is everything with these rifles. Function wise....nxs is the way to go. Better glass, more magnification. 2.5-8 Leupy is what was issued with these and are on the majority of mod1's in pics from the wild....not to mention Lone Survivor and American Sniper. It wasn't Hollywood that came up with which glass was used on the rifles from those movies....they were seals. And I've never seen a 3.5-10 issued on one, only put on by the operator. So, it really comes down to what kind of mod1 YOU want to own. After shooting out to 600 yds, the 2.5-8 is growing on me. Wasn't a fan at first, because I do mostly benchrest shooting. But it is lighter and less bulky than my 3.5-10, but not as good for grouping on paper I think. If I were to pick out of anything. ...3.5-15nxs all day View Quote View All Quotes View All Quotes Originally Posted By Davey_Sickboy:
Originally Posted By cbfurg:
Looking for an optic for my Mod 1. I've got around $1300 to spend. What do you guys suggest? Trying to decide if I drop it all on glass or save some of it to pick up an Aem5... Is the NF the way to go over the Leupold? I've been doing a bunch of research but figured this is the place to come for everything mk12. I've never owned anything higher end than a Vortex PST (which I know isn't high end). I'm currently thinking NF 2.5-10x32 w/ a Larue mount. I'm open to suggestions. Trying to stay as clone correct as possible but I'd like to get as much bang for my buck as I can! Depends on the kind of mod1 your going for. Let's admit....look is everything with these rifles. Function wise....nxs is the way to go. Better glass, more magnification. 2.5-8 Leupy is what was issued with these and are on the majority of mod1's in pics from the wild....not to mention Lone Survivor and American Sniper. It wasn't Hollywood that came up with which glass was used on the rifles from those movies....they were seals. And I've never seen a 3.5-10 issued on one, only put on by the operator. So, it really comes down to what kind of mod1 YOU want to own. After shooting out to 600 yds, the 2.5-8 is growing on me. Wasn't a fan at first, because I do mostly benchrest shooting. But it is lighter and less bulky than my 3.5-10, but not as good for grouping on paper I think. If I were to pick out of anything. ...3.5-15nxs all day Most (all) of the shooting I do is benchrest currently. There is an appeal to me for the issued optic but I've also always wanted a Nightforce. I've heard the hype but never even held one. I'm lost on reticles as well right now... Sorry guys. I'm a noob on this shit. I don't make a lot of money so this clone rifle is a big deal for me (and a testament to my awesome wife's love for me) but I'm not well-heeled enough to make informed decisions based on personal experience... |
|
|
Originally Posted By cbfurg: Most (all) of the shooting I do is benchrest currently. There is an appeal to me for the issued optic but I've also always wanted a Nightforce. I've heard the hype but never even held one. I'm lost on reticles as well right now... Sorry guys. I'm a noob on this shit. I don't make a lot of money so this clone rifle is a big deal for me (and a testament to my awesome wife's love for me) but I'm not well-heeled enough to make informed decisions based on personal experience... View Quote View All Quotes View All Quotes Originally Posted By cbfurg: Originally Posted By Davey_Sickboy: Originally Posted By cbfurg: Looking for an optic for my Mod 1. I've got around $1300 to spend. What do you guys suggest? Trying to decide if I drop it all on glass or save some of it to pick up an Aem5... Is the NF the way to go over the Leupold? I've been doing a bunch of research but figured this is the place to come for everything mk12. I've never owned anything higher end than a Vortex PST (which I know isn't high end). I'm currently thinking NF 2.5-10x32 w/ a Larue mount. I'm open to suggestions. Trying to stay as clone correct as possible but I'd like to get as much bang for my buck as I can! Depends on the kind of mod1 your going for. Let's admit....look is everything with these rifles. Function wise....nxs is the way to go. Better glass, more magnification. 2.5-8 Leupy is what was issued with these and are on the majority of mod1's in pics from the wild....not to mention Lone Survivor and American Sniper. It wasn't Hollywood that came up with which glass was used on the rifles from those movies....they were seals. And I've never seen a 3.5-10 issued on one, only put on by the operator. So, it really comes down to what kind of mod1 YOU want to own. After shooting out to 600 yds, the 2.5-8 is growing on me. Wasn't a fan at first, because I do mostly benchrest shooting. But it is lighter and less bulky than my 3.5-10, but not as good for grouping on paper I think. If I were to pick out of anything. ...3.5-15nxs all day Most (all) of the shooting I do is benchrest currently. There is an appeal to me for the issued optic but I've also always wanted a Nightforce. I've heard the hype but never even held one. I'm lost on reticles as well right now... Sorry guys. I'm a noob on this shit. I don't make a lot of money so this clone rifle is a big deal for me (and a testament to my awesome wife's love for me) but I'm not well-heeled enough to make informed decisions based on personal experience... Take that $1300 and use it to buy the suppressor. While you're waiting for it to clear, pinch your pennies for a NF 2.5-10x or 3.5-15x paired with an LT-104. Keep your eyes peeled for EE deals and before you know it, you'll have both the optic AND the suppressor to make your Mod1 too fucking legit to quit. I'm like you, cbfurg. I don't make a great deal of money but I want nice shit and I'm not willing to settle for subpar gear. Don't settle; start the paperwork and the wait for your suppressor NOW. Fuck backup irons until you've covered everything else. Guess how many times I've deployed and used my expensive-ass KAC irons... Exactly ZERO times. 1. Suppressor 2. Glass 3. Irons |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
If you're an avid shooter and dying to put rounds down range I still say aem5 and buis. I like to take my scope off and ring steel out to 500 with the buis every time I'm at the range. Really enjoy it.
If you're not such an open sights guy and don't mind waiting to shoot- it makes sense like Utah said to aem5 then glass/mount. Interested to see where the BRD takes you. |
|
I wouldn't say I'm a gun nut... but I'd consider extreme enthusiast.
|
Originally Posted By JohnStoner: If you're an avid shooter and dying to put rounds down range I still say aem5 and buis. I take my scope off and ring steel out to 500 with the buis every time I'm at the range. Really enjoy it. If you're not such an open sights guy and don't mind waiting to shoot it makes sense like Utah said to aem5 then glass/mount. View Quote True, irons are fun even though I never use mine. But for me, the end-game was to have Tier Juan glass and the proper can, which is why I recommended prioritizing parts in that order. Definitely more than one way to skin the Mk12 cat. |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust?
|
|
|
Originally Posted By cbfurg:
I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? View Quote Yes, if you want other people to be able to use your stuff when you're not around. |
|
|
Originally Posted By minion42: Yes, if you want other people to be able to use your stuff when you're not around. View Quote View All Quotes View All Quotes Originally Posted By minion42: Originally Posted By cbfurg: I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? Yes, if you want other people to be able to use your stuff when you're not around. Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
Originally Posted By RTUtah:
Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. View Quote View All Quotes View All Quotes Originally Posted By RTUtah:
Originally Posted By minion42:
Originally Posted By cbfurg:
I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? Yes, if you want other people to be able to use your stuff when you're not around. Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... |
|
|
Originally Posted By cbfurg: You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... View Quote View All Quotes View All Quotes Originally Posted By cbfurg: Originally Posted By RTUtah: Originally Posted By minion42: Originally Posted By cbfurg: I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? Yes, if you want other people to be able to use your stuff when you're not around. Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... Both Ron and ADCO are solid vendors. If you Google around, you can write your own trust up for free and spend a few bucks to get it notarized. That's how I did it. Some lawyers want several hundred bucks to draw a revocable living trust up. Shit's crazy. |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
My bank notarizes for free, yours might also.
|
|
|
id find somewhere other than adco to buy imo. severe lack of communication.
|
|
|
Originally Posted By cbfurg:
You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... View Quote View All Quotes View All Quotes Originally Posted By cbfurg:
Originally Posted By RTUtah:
Originally Posted By minion42:
Originally Posted By cbfurg:
I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? Yes, if you want other people to be able to use your stuff when you're not around. Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... As mentioned in the Ops/AE thread, check out High Caliber Sales. I would jump at the chance to get a knurled can. |
|
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.