I have a serious question here. I went into your PSA store to take advantage of the buy a PSA-15 freedom get a shield free. I asked to look at the freedom ar15 and was shown a nice one on the shelf. when I told the salesperson I wanted the deal with the shield , the person got a box and opened it. Upon inspection this AR15 freedom IS NOT A freedom rifle,. It had no forging marks on the upper, no psa logo on the left side of the upper nor the BCG logo. unlike the one on the shelf that did. after more inspections of the one in the box, the BCG would not go in battery unless tapping the FA, the bolt felt like 80 grit sand paper in the upper. The whole rifle felt cheaper than a DTI. When I told the sales person after looking at 4 in the boxes and all were the same , i said ill just take the one on the shelf. i was told no that the ones in the box are the ones in the deal....whats up PSA? this felt like a very bad PTAC rifle not the freedom you have on the shelf. I would like some answers as it seems like they are trying a fast one. perhaps these are PSA lowers with PTAC uppers?Any way to get the ones on the shelf and not the junk in the box? Whats up PSA?