User Panel
[#1]
Originally Posted By MoreAckAck:
Almost. Do you have a black upper you could put on the RO lower? Thanks. View Quote View All Quotes View All Quotes Originally Posted By MoreAckAck:
Almost. Do you have a black upper you could put on the RO lower? Thanks. i do but not handy at the moment. maybe later if i get time. Originally Posted By tReznr:
Originally Posted By tacticalmedic450:
Originally Posted By MoreAckAck:
Pic request: Can someone who has received their RO lower already please take a pic of it paired with a black barreled upper? Preferably a Larue but I'll take what I can get. Thanks. not sure if this tis what your asking about but bottom rifle is all Larue Stealth 2.0. only part not Larue that really matters is the BCG but hopefully that changes 3Q BuildAR <a href="http://smg.photobucket.com/user/mburgin/media/Firearms/Larue%20Tactical/IMG_5498.jpg.html" target="_blank">http://img.photobucket.com/albums/v379/mburgin/Firearms/Larue%20Tactical/IMG_5498.jpg</a> tacticalmedic450, What length barrel and what length handguard are used for the two rifles? the top is a Larue Stealth 12" .300 BLK barrel with the 10.5" hand guard (this is an NFA lower since the new LT is pending a form 1) the bottom is a LT Stealth 14.5" 5.56 barrel w/ pinned MD with a 12" hand guard |
|
|
[#2]
When should the next email come out?
|
|
|
[Last Edit: tReznr]
[#3]
|
|
|
[#4]
|
|
|
[#5]
Originally Posted By tReznr:
Think there's enough room to use a 13.2 inch rail with a 14.5 inch barrel (with 51t mount pinned in place) and attach / disconnect an AAC M4-2000? View Quote View All Quotes View All Quotes Originally Posted By tReznr:
Originally Posted By tacticalmedic450:
the bottom is a LT Stealth 14.5" 5.56 barrel w/ pinned MD with a 12" hand guard Think there's enough room to use a 13.2 inch rail with a 14.5 inch barrel (with 51t mount pinned in place) and attach / disconnect an AAC M4-2000? i believe you will be fine with this setup. |
|
|
[#6]
|
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#7]
Originally Posted By LaRue_Tactical:
http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By LaRue_Tactical:
Guys, my apologies for the BuildAR occurrence times ... there's still a war going on and we're still servicing it. http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg Which mount is that Mark? |
|
|
[#8]
^^^
Top of our Facebook page |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#9]
|
|
|
[#10]
|
|
Proud Member of Team Ranstad
|
[#11]
Got my RO lower today. My ffl is a cerkoter, and had a full color wheel. Closest colors to my eye are tactical gray or steel gray.
|
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#12]
Originally Posted By LaRue_Tactical:
http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By LaRue_Tactical:
Guys, my apologies for the BuildAR occurrence times ... there's still a war going on and we're still servicing it. http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg Pretty damn sweet |
|
|
[#13]
Originally Posted By ozzie839:
Pretty damn sweet View Quote View All Quotes View All Quotes Originally Posted By ozzie839:
Originally Posted By LaRue_Tactical:
Originally Posted By LaRue_Tactical:
Guys, my apologies for the BuildAR occurrence times ... there's still a war going on and we're still servicing it. http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg Pretty damn sweet Our levers was the only way they could keep it from shaking off and falling into the sand. Their words, not mine. |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[Last Edit: jeep450]
[#14]
pretty sexy shit in the raw, how about some closer pics of them?
|
|
|
[#15]
Originally Posted By LaRue_Tactical:
Our levers was the only way they could keep it from shaking off and falling into the sand. Their words, not mine. View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By ozzie839:
Originally Posted By LaRue_Tactical:
Originally Posted By LaRue_Tactical:
Guys, my apologies for the BuildAR occurrence times ... there's still a war going on and we're still servicing it. http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg Pretty damn sweet Our levers was the only way they could keep it from shaking off and falling into the sand. Their words, not mine. I don't doubt it one bit |
|
|
[#17]
Originally Posted By LaRue_Tactical:
Our levers was the only way they could keep it from shaking off and falling into the sand. Their words, not mine. View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By ozzie839:
Originally Posted By LaRue_Tactical:
Originally Posted By LaRue_Tactical:
Guys, my apologies for the BuildAR occurrence times ... there's still a war going on and we're still servicing it. http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/IMG_5864_zpsr9wmax9s.jpg Pretty damn sweet Our levers was the only way they could keep it from shaking off and falling into the sand. Their words, not mine. |
|
Proud Member of Team Ranstad
|
[#18]
Arrived on Thursday and fill form 4473 and I'm delayed. Fuck anti gun laws!
|
|
#/fuck you
|
[#19]
Originally Posted By branflake12: Here is mine with a black upper. Indoor lighting. http://i.imgur.com/PWIjlSR.jpg Side note...that Aero upper isnt going all the way back. It does on every other lower i have, do i recall some mention of these being extra tight? and if so...whats the fix? ETA: same gap on my DDm4 upper and it wont even close on the back lug of my 2A balios lite upper. What gives? View Quote Might be something to do with the enhanced upper.
|
|
|
[#20]
Originally Posted By ufgators68:
Locks up tight on my regular Aero upper. No gap at all. Might be something to do with the enhanced upper. View Quote View All Quotes View All Quotes Originally Posted By ufgators68:
Originally Posted By branflake12:
Here is mine with a black upper. Indoor lighting. http://i.imgur.com/PWIjlSR.jpg Side note...that Aero upper isnt going all the way back. It does on every other lower i have, do i recall some mention of these being extra tight? and if so...whats the fix? ETA: same gap on my DDm4 upper and it wont even close on the back lug of my 2A balios lite upper. What gives? Might be something to do with the enhanced upper. I'd thought so, but my DD upper does the same. Balios won't even go down. I just wanted to know if it's my lower or how these are in general before i bothered the shop. Ill file down the upper lug if that's what i need to do, but was hoping others could chime in with their fits on non stealth uppers. |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#21]
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there...
I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... |
|
They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Nov 11, 1755. NRA Endowment member. |
[#22]
Originally Posted By WVgunner:
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there... I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... View Quote Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#23]
Originally Posted By branflake12:
Here is mine with a black upper. Indoor lighting. http://i.imgur.com/PWIjlSR.jpg Side note...that Aero upper isnt going all the way back. It does on every other lower i have, do i recall some mention of these being extra tight? and if so...whats the fix? ETA: same gap on my DDm4 upper and it wont even close on the back lug of my 2A balios lite upper. What gives? View Quote I've seen this with a couple of uppers before. Look at the ear on the take down pin, I bet it is really square. Now look at the area where it would rest in the lower, notice how that is rounded? Take a file and knock off the edge of the ear, shouldn't take much. |
|
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
[#24]
That sure looks like it'd do it. Just odd that 3 different uppers have the same tolerance issue.
Guess I'll have to file it down and ceracote it now. For protection. |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#25]
Originally Posted By branflake12:
Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. View Quote View All Quotes View All Quotes Originally Posted By branflake12:
Originally Posted By WVgunner:
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there... I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. I'll give you your $200 back that you have invested in that lower, that way you don't have to do anything. |
|
|
[#26]
Originally Posted By jeep450:
I'll give you your $200 back that you have invested in that lower, that way you don't have to do anything. View Quote View All Quotes View All Quotes Originally Posted By jeep450:
Originally Posted By branflake12:
Originally Posted By WVgunner:
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there... I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. I'll give you your $200 back that you have invested in that lower, that way you don't have to do anything. Way to help out an arfcommer in a jam |
|
Proud Member of Team Ranstad
|
[#27]
Originally Posted By APPARITION:
Way to help out an arfcommer in a jam View Quote View All Quotes View All Quotes Originally Posted By APPARITION:
Originally Posted By jeep450:
Originally Posted By branflake12:
Originally Posted By WVgunner:
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there... I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. I'll give you your $200 back that you have invested in that lower, that way you don't have to do anything. Way to help out an arfcommer in a jam Hey I though offering exactly what he had in that blem paperweight was pretty fare Don't judge me for trying to help him out |
|
|
[Last Edit: WVgunner]
[#28]
Originally Posted By branflake12:
Here is mine with a black upper. Indoor lighting. http://i.imgur.com/PWIjlSR.jpg Side note...that Aero upper isnt going all the way back. It does on every other lower i have, do i recall some mention of these being extra tight? and if so...whats the fix? ETA: same gap on my DDm4 upper and it wont even close on the back lug of my 2A balios lite upper. What gives? View Quote As a point of reference here is the "gap" on my Stealth....LT Lower and Stealth Upper... Like I said I had no issues with it locking up...no problems with the pins or otherwise...just this cosmetic issue... |
|
They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Nov 11, 1755. NRA Endowment member. |
[#30]
yea you fucked that up real good
it's broken in |
|
|
[#31]
|
|
|
[#32]
Originally Posted By CodyY:
Not one of my prouder moments, but the first time it gets dropped in the dirt I won't lose my shit. View Quote View All Quotes View All Quotes Originally Posted By CodyY:
Originally Posted By jeep450:
yea you fucked that up real good it's broken in Not one of my prouder moments, but the first time it gets dropped in the dirt I won't lose my shit. It's kinda like when you get a new truck....that first scratch really pisses you off! But after that it's like "meh, whatever" |
|
"But seek ye first the kingdom of God, and his righteousness; and all these things shall be added unto you."
Matthew 6:33 |
[#33]
Originally Posted By jeep450:
Hey I though offering exactly what he had in that blem paperweight was pretty fare Don't judge me for trying to help him out View Quote View All Quotes View All Quotes Originally Posted By jeep450:
Originally Posted By APPARITION:
Originally Posted By jeep450:
Originally Posted By branflake12:
Originally Posted By WVgunner:
I have the same gap on a Larue lower and Stealth upper...its not as significant as the one you pictured but its there... I emailed photos of it back to LT a few months ago and they basically told me it was "normal" they explained something about Larue lower tolerances being "generous" to fit a wide variety of uppers Basically I just had to live with it...Its just a cosmetic issue in my case but it was dissapointing... Interesting. I put a pivot pin in and none of my 3 uppers will close at all. It is hitting the rear pocket where it radius' out. The other 4 lowers i looked at all make the curves at the rear a bit differently, and the rear lug just can't go in. Not sure what to do, i wasn't planning on "hand fitting" this. I'll give you your $200 back that you have invested in that lower, that way you don't have to do anything. Way to help out an arfcommer in a jam Hey I though offering exactly what he had in that blem paperweight was pretty fare Don't judge me for trying to help him out Yeah, he is just being incredibly thoughtful and generous. |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#34]
Originally Posted By WVgunner:
As a point of reference here is the "gap" on my Stealth....LT Lower and Stealth Upper... Like I said I had no issues with it locking up...no problems with the pins or otherwise...just this cosmetic issue... http://i1252.photobucket.com/albums/hh570/mlh1968/20160808_090216.jpg View Quote View All Quotes View All Quotes Originally Posted By WVgunner:
Originally Posted By branflake12:
Here is mine with a black upper. Indoor lighting. http://i.imgur.com/PWIjlSR.jpg Side note...that Aero upper isnt going all the way back. It does on every other lower i have, do i recall some mention of these being extra tight? and if so...whats the fix? ETA: same gap on my DDm4 upper and it wont even close on the back lug of my 2A balios lite upper. What gives? As a point of reference here is the "gap" on my Stealth....LT Lower and Stealth Upper... Like I said I had no issues with it locking up...no problems with the pins or otherwise...just this cosmetic issue... http://i1252.photobucket.com/albums/hh570/mlh1968/20160808_090216.jpg Mind the gap |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
[#35]
Does anyone have a picture with the RO and the Larue UDE polymer in the same picture to compare the shades? Hopefully my upper and handguard match my lower. The mismatched colors on some of these pictures do not look good.
|
|
|
[#36]
Originally Posted By JasonblkZ06:
Does anyone have a picture with the RO and the Larue UDE polymer in the same picture to compare the shades? Hopefully my upper and handguard match my lower. The mismatched colors on some of these pictures do not look good. View Quote I'll get this tonight. I'm going for a SCAR FDE look, but in grays |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#37]
Originally Posted By JasonblkZ06:
Does anyone have a picture with the RO and the Larue UDE polymer in the same picture to compare the shades? Hopefully my upper and handguard match my lower. The mismatched colors on some of these pictures do not look good. View Quote Here is one: Stealth 2.0 |
|
|
[#38]
Originally Posted By JDeere7296:
It's kinda like when you get a new truck....that first scratch really pisses you off! But after that it's like "meh, whatever" View Quote View All Quotes View All Quotes Originally Posted By JDeere7296:
Originally Posted By CodyY:
Originally Posted By jeep450:
yea you fucked that up real good it's broken in Not one of my prouder moments, but the first time it gets dropped in the dirt I won't lose my shit. It's kinda like when you get a new truck....that first scratch really pisses you off! But after that it's like "meh, whatever" 3rd payment on my 2016 Canyon All-Terrain went through this morning. I'm not ready for that scratch yet |
|
|
[#40]
Got my triggers today, gave one along with the swag to a buddy. No hat.. Hope it's with the lower! Love me a BuildARs hat
|
|
|
[Last Edit: BBOHACH]
[#41]
Dupe
|
|
|
[#42]
Originally Posted By CodyY:
However it's a little snug. Magazine release took a little effort to line up, my Aero upper doesn't fit at all, and my RedX arms SPR upper is really snug.... View Quote View All Quotes View All Quotes Originally Posted By CodyY:
Originally Posted By JasonblkZ06:
Does anyone have a picture with the RO and the Larue UDE polymer in the same picture to compare the shades? Hopefully my upper and handguard match my lower. The mismatched colors on some of these pictures do not look good. However it's a little snug. Magazine release took a little effort to line up, my Aero upper doesn't fit at all, and my RedX arms SPR upper is really snug.... That's what my new lower looks like after trying all 3 of my uppers. Which one are you going to stick with? |
|
Our black flies up here laugh at your meager toy.
We have blackflies that can stand flat footed and rape a turkey. -Kopterdoctor |
[#43]
Originally Posted By branflake12:
That's what my new lower looks like after trying all 3 of my uppers. Which one are you going to stick with? View Quote View All Quotes View All Quotes Originally Posted By branflake12:
Originally Posted By CodyY:
Originally Posted By JasonblkZ06:
Does anyone have a picture with the RO and the Larue UDE polymer in the same picture to compare the shades? Hopefully my upper and handguard match my lower. The mismatched colors on some of these pictures do not look good. However it's a little snug. Magazine release took a little effort to line up, my Aero upper doesn't fit at all, and my RedX arms SPR upper is really snug.... That's what my new lower looks like after trying all 3 of my uppers. Which one are you going to stick with? Preferably I'd be able to put any upper on any lower any day of the week, however since "50 shades" is gonna be 300blk and 12" barrel sbr, I'll keep the Srealth2.0 on there this go-round |
|
|
[#44]
My RO Stealth upper and the RO lower are extremely tight. I will need to tap it closed with a nylon or rubber mallet. The pain will be getting them apart each time to break it in. Not that is a bad thing. I believe all the lower components will be snug going in too. I think the groups will be the same way when I get to shoot it.
|
|
|
[#45]
My 2nd qtr order finally shipped ( 3354xx). Black lower with 2 MBT's and the LT845 mount with 30mm ring spacers and a PRI Gas Buster charging handle. Looks like no back order on the MBT's or the LT845. Finally gonna check out the AWS Radius on a worthy mount. No word yet on 1st qtr order (black Stealth 2.0 upper with standard ramps, 12" 300 BLK barrel cartridge, gas block and 13" fore grip for my pinned 14" tOBR 556 barrel ). Progress is a good thing.
|
|
Tennesse Squire
LaRue BuildAR |
[#46]
Did anyone else have a few blemishes on their RO lowers?
I have a few on the one I received, and just curious if the finish didn't hold up as well with others from the same lot. |
|
|
[Last Edit: prcharlie]
[#47]
|
|
|
[#48]
Originally Posted By DannyBoy6296:
Did anyone else have a few blemishes on their RO lowers? I have a few on the one I received, and just curious if the finish didn't hold up as well with others from the same lot. View Quote Mine had some small ones, but truth be told I like my firearms to get used. So some marks are the least of my concerns. I build/buy guns to be run, not for looks. Especially since I run a cerakote gig and make things all pretty most the time for people. |
|
|
[#49]
|
|
|
[#50]
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.