User Panel
User Panel
User Panel
|
Posted: 6/20/2013 6:53:27 AM EDT
LINK Some say it's the finest 7.62 mag ever developed. Even though these steel 7.62 mags were designed and produced as a factory magazine for the LaRue OBR 7.62 rifle, they'll fit just about any rifle that accepts M110-pattern magazines. The cartridge guide rails along the side feature a unique horizontal-break near the feedlips. This design reduces cartridge drag as the extractor groove rides along the feedlips. The magazine seam is "hidden:" at the rear instead of being placed conventionally at the front, where it robs the magazine of precious internal capacity (very important if you intend on using handloads, or ammunition like M118LR with larger overall cartridge lengths). The seam is neatly laser-welded the entire length of the magazine to reduce build-up of grit and deposits that inhibit the magazine's ability to fall free. The slick, corrosion-resistant surface improves cartridge feeding, allows the magazine to drop free and makes cleanup and maintenance easier. Our followers are made of glass-reinforced polymer, designed to reduce tilt, and effortlessly feeds cartridges into the chamber with perfect alignment. They are hi-vis red, to take the guess-work out of quickly eyeballing whether your mag is empty (especially helpful in low-light conditions). The floor plates (also designed and manufactured in-house) keep the spring centered, and allow easy breakdown for cleaning and maintenance |
|
|
|
Posted: 6/20/2013 6:55:28 AM EDT
[#1]
Sweet! I think I'll order some to celebrate their return. Thanks LT!
|
|
|
|
Posted: 6/20/2013 7:22:33 AM EDT
[#2]
Can I order some and have them shipped to a free state so I can use them on my annual visit to that state????
|
|
|
|
Posted: 6/20/2013 7:22:54 AM EDT
[#3]
Quoted:
Some say it's the finest 7.62 mag ever developed. Not sure I would disagree with that. They are without a doubt my preferred 7.62 mags, which is kinda of funny to me as I prefer polymer over metal on my 5.56's |
|
|
|
Posted: 6/20/2013 7:23:53 AM EDT
[#4]
Bought two and a hat as well : )
|
|
|
|
Posted: 6/20/2013 7:35:16 AM EDT
[#5]
I'll go ahead and get a couple so they can anticipate the tOBR's arrival!
BigDozer66 |
|
|
|
Posted: 6/20/2013 8:06:04 AM EDT
[#6]
great mags......now to find something to put in them.
|
|
|
|
Posted: 6/20/2013 8:34:52 AM EDT
[#7]
 A sign of more good things to come???? 2 for me please.
|
|
|
|
Posted: 6/20/2013 8:49:33 AM EDT
[#8]
Prudy! Now to look for something to put them in...
|
|
|
|
Posted: 6/20/2013 9:29:24 AM EDT
[#9]
Are you still shipping to CO?
ETA: We still have 10 days, so it should not be an issue. ETA 2: Well that was fast. You guys are on point with the shipping today. Thanks, fellas! |
|
|
|
Posted: 6/20/2013 9:44:23 AM EDT
[#10]
Armalite compatible?
|
|
|
|
Posted: 6/20/2013 10:14:33 AM EDT
[#11]
Got my tracking number so mine will be here tomorrow!
BigDozer66 |
|
|
|
Posted: 6/20/2013 10:33:34 AM EDT
[#12]
Must have enough stockpiled for rifle orders
|
|
|
|
Posted: 6/20/2013 11:17:33 AM EDT
[#13]
Does this mean my backorder for two at the old price of $3370 is ready to ship? If I remember correctly, there was supposed to be a 7.62 tOBR thrown in with the swag on that order.
|
|
|
|
Posted: 6/20/2013 11:21:13 AM EDT
[#14]
Quoted:
Does this mean my backorder for two at the old price of $3370 is ready to ship? If I remember correctly, there was supposed to be a 7.62 tOBR thrown in with the swag on that order. Yeah, I got the same deal you did!!! .... and here I thought I was special!
|
|
|
|
Posted: 6/21/2013 7:23:20 AM EDT
[#15]
Made my order this AM, received tracking info at 0807.
|
|
|
|
Posted: 6/21/2013 8:32:05 AM EDT
[#16]
What about stripped lowers?
|
|
|
|
Posted: 6/21/2013 9:05:19 AM EDT
[#17]
Quoted:
What about stripped lowers? lmao now your just getting greedy. |
|
|
|
Posted: 6/21/2013 2:24:48 PM EDT
[#18]
Still not shipping to HI.
|
|
|
|
Posted: 6/21/2013 5:24:26 PM EDT
[#19]
$80 a pop are you fucking high?
|
|
|
|
Posted: 6/21/2013 6:19:42 PM EDT
[#20]
I have two already and about 12 Pmags. Waiting to try and get at least (2) 25 Rd Pmags.
|
|
|
|
Posted: 6/21/2013 7:24:01 PM EDT
[#21]
The BBT delivered mine today!
BigDozer66 |
|
|
|
Posted: 6/22/2013 3:27:16 AM EDT
[#22]
I cannot believe it - ordered 2 and they shipped out the next day. First time ever I have placed an order with Larue that shipped the next day! Now if I could just get the OBR to put them in I will be set.
|
|
|
|
Posted: 6/22/2013 3:49:28 AM EDT
[#23]
Quoted:
I cannot believe it - ordered 2 and they shipped out the next day. First time ever I have placed an order with Larue that shipped the next day! Now if I could just get the OBR to put them in I will be set. More often than not, my orders have shipped the same day. You need to order more.
|
|
|
|
Posted: 6/22/2013 12:18:05 PM EDT
[#24]
Quoted:
What about stripped lowers? This |
|
|
|
Posted: 6/22/2013 5:51:52 PM EDT
[#25]
Quoted:
Quoted:
I cannot believe it - ordered 2 and they shipped out the next day. First time ever I have placed an order with Larue that shipped the next day! Now if I could just get the OBR to put them in I will be set. More often than not, my orders have shipped the same day. You need to order more. This is my experience and 99.9% of the time I get it the next day.
BigDozer66 |
|
|
|
Posted: 6/23/2013 5:28:11 AM EDT
[#26]
Quoted:
$80 a pop are you fucking high? I seem to remember last time i purchased these they were 50 USD. What happened?? |
|
|
|
Posted: 6/23/2013 5:51:04 AM EDT
[#27]
Quoted:
Quoted:
$80 a pop are you fucking high? I seem to remember last time i purchased these they were 50 USD. What happened?? You must have purchased them a long time ago. They've been $80 for as long as I remember. I ordered my OBR in 2011 and they were priced at $80 then. They are similar in performance to the KAC mags that run $100+ each. The LT and KAC mags allow a slightly longer OAL for those who reload vs the pmag. |
|
|
|
Posted: 6/23/2013 9:27:51 PM EDT
[#28]
I got a pair when Mark made them available without the OBR. Price has not changed. $149.00 for two.
Thanks again Mark, great magazines, and worth it.
|
|
|
|
Posted: 6/24/2013 6:57:26 AM EDT
[#29]
My eFN' SCAR mags aren't event $80 anymore...these mags must be something magical. I am sure I will find a reason to submit and bite the bullet though.
|
|
|
|
Posted: 6/24/2013 9:26:24 AM EDT
[#30]
I did. Ordered extra with my obr way back in 09 i guess. They were backordered forever then one day they called and asked if i still wanted. They were 50 bucks each, and i remember thinking that was alot to spend on a mag. But they are very good, and i always prefer them over the pmags. Glad i got them when i did now!
|
|
|
|
Posted: 6/26/2013 5:47:28 PM EDT
[#31]
Quoted: LINK Some say it's the finest 7.62 mag ever developed. Even though these steel 7.62 mags were designed and produced as a factory magazine for the LaRue OBR 7.62 rifle, they'll fit just about any rifle that accepts M110-pattern magazines. The cartridge guide rails along the side feature a unique horizontal-break near the feedlips. This design reduces cartridge drag as the extractor groove rides along the feedlips. The magazine seam is "hidden:" at the rear instead of being placed conventionally at the front, where it robs the magazine of precious internal capacity (very important if you intend on using handloads, or ammunition like M118LR with larger overall cartridge lengths). The seam is neatly laser-welded the entire length of the magazine to reduce build-up of grit and deposits that inhibit the magazine's ability to fall free. The slick, corrosion-resistant surface improves cartridge feeding, allows the magazine to drop free and makes cleanup and maintenance easier. Our followers are made of glass-reinforced polymer, designed to reduce tilt, and effortlessly feeds cartridges into the chamber with perfect alignment. They are hi-vis red, to take the guess-work out of quickly eyeballing whether your mag is empty (especially helpful in low-light conditions). The floor plates (also designed and manufactured in-house) keep the spring centered, and allow easy breakdown for cleaning and maintenance They are truely the best mags I have ever loaded 
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
