Brownells ALUMA-HYDE™ II works.
"Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethane. Today's new family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it's great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Gray Parkerizing (medium dark), Stainless Steel Gray (light), Earth Brown, O.D. Green for creating camo pattern stocks and the original favorite, Matte Black. To compliment the matte finishes, Semi-Gloss Black and Gloss Clear help expand the overall applications of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around "truck" guns and, of course, anodized parts.
Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here's the way we apply it: Warm the part and the Aluma-Hyde II to about 90° F; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don't wait more than an hour or so. Once Aluma-Hyde II starts curing, you must wait until it's fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90° F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.
SPECS: 12 oz. (340 g) aerosol can.
Product Price Qty. Restrictions
083-002-012 Matte Black $9.02
083-002-212 Parkerizing Gray $9.02
083-002-412 S/S Gray $9.02
083-002-612 Gloss Clear $9.02
083-002-112 Semi-Gloss Black $9.02
083-002-312 O.D. Green $9.02
083-002-512 Earth Brown $9.02
083-002-812 Dark Gray Parkerizing $8.83