User Panel
|
|
|
Quoted:
http://i.imgur.com/l1CTK8C.jpg View Quote |
|
Quoted:
Nice! I had a 347lb Hay Budden, but it was just too damn big for how much I used it. A guy traded me a wad of cash and his 130lb Mousehole (posted above) for it. Then I came upon a 130lb Peter Wright that I couldn't pass up. View Quote The Sodorfors is the only decent one I've ever seen for sale around me. I paid a pretty hefty price ($400 I think it was), but it beats railroad track! I've been on the lookout for a bigger anvil, but I probably wouldn't know what to do with a 374 pound monster. I don't want to move my tiny one around as it is haha. |
|
Quoted:
http://AR15.Com/media/mediaFiles/133188/IMG-4476-100771.JPG One of my older ones in the new shop. View Quote I have the same/similar grinder. Mine is from the early 60s IIRC. Through inheritance , I have quite a few vintage tools including a complete WWII era carpenters set, a large bench vice from the early 1900s and a whole bunch of other stuff. Anybody know how old this death wheel is? My guess is late 50s/early 60's. Cord isn't fabric covered, I put a fresh wheel on it for some stupid reason. One of the few tools I own that NFW am I using. The finger remover. Attached File I suspect these are also 1960s vintage. Look to be almost unused or really, really well cared for. They were (and still are) wrapped in oiled cloth) Attached File Attached File The wood hardware organizer that is upside-down in the bottom pic dates from the late 1800s, it is full of all kinds of neat hardware, quite a few brass wood screws in it. Someday I want to do a sympathetic restoration on it and put it in my living room. |
|
Quoted:
http://i.imgur.com/l1CTK8C.jpg View Quote Those were the predecessor of these. back in the early 1970s they were everywhere on road construction sites at night. |
|
Attached File
My Rock Island manufactured Craftsman 5161 and the mighty Charles Parker 976. Chuck weighs a bit over 170 lbs. |
|
|
Quoted:
Those were the predecessor of these. back in the early 1970s they were everywhere on road construction sites at night. http://i.ebayimg.com/images/g/8c4AAOSwoudW9ECW/s-l300.jpg View Quote |
|
Quoted:
Not incredibly old, but it gets used somewhat often. http://AR15.Com/media/mediaFiles/326493/Untitled-100827.JPG View Quote I have the same one. Works great. |
|
Quoted:
Nice! I had a 347lb Hay Budden, but it was just too damn big for how much I used it. A guy traded me a wad of cash and his 130lb Mousehole (posted above) for it. Then I came upon a 130lb Peter Wright that I couldn't pass up. View Quote My 104 lb Peter Wright. A gift from my uncle. I will have to get a better pic tomorrow. Attached File |
|
|
|
|
|
|
|
|
Quoted:
asbestos shingle cutter. My dad has one. My Mousehole anvil made around 1860. http://AR15.Com/media/mediaFiles/109172/IMG-20160909-192326266-100797.JPG View Quote That mousehole is badass. I've got a couple of Trenton anvils and a Fisher. I dig anvils. |
|
|
|
Quoted:
Adena stone axe head, about 2000 years old http://i4.photobucket.com/albums/y126/von_landstuhl/AR15/celt.jpg View Quote well played sir, well played... |
|
View Quote Lol -.I have almost every tool on your board, particularly the bit braces, and the shoulder hand drill. |
|
Great thread! Very interesting tools. Thanks for posting guys.
|
|
Cool thread. Tagged so I can post some pics of my grandfathers old railroad tools from when he was an engineer for NKP
|
|
Great thread. My dad just downsized and I was able to save most of his tools. My favorites are actually the old metal toolboxes and some wood tool caddies he made himself.
This old saw still going strong: Attached File Attached File |
|
Quoted:
http://ar15.com/media/mediaFiles/326114/tool-002-100821.JPGGiven to me as a gift about 25 years ago. View Quote Cool wrench. Reminds me of my junk yard find a few weeks ago that was rusted shut. Took days of vinegar soaking to get it unbound. Attached File |
|
We have a bunch of stuff we got from an old German cabinet maker in the late 70s. Poor old guy was a genius with wood but horrible with booze and reliability. The main piece is a 1940s Milwaukee table saw. I think it will take 14" blades. Some huge work tables used to be very nice, they are buried under a ton of shit at my dads.
|
|
Prolly some nice, old tools here. Its a shame I can only see half a page. What am I missing???
|
|
Hollands 14 Machinist Vice that belonged to my grandfather. I ran it through an electrolysis bath and gave it a new paint job. From my reasearch probably made around 1910-1920.
When I brought it home. Attached File After electrolysis Attached File New paint Attached File 4" jaws open up 8" Weighs about 65 pounds. Attached File |
|
Millers Falls 1/4" capicity 8 amp drill motor. It runs on AC or DC power. This one is on the restoration list. It runs but the chuck is froze up. I think this was made in the 1940's.
Attached File Attached File |
|
|
A very large handplane given to me by my grandmother. No markings on it, so it could be homemade.Total length is 22" and it is made of maple. I need to give it a good linseed oil rubdown.
Attached File Attached File Attached File |
|
Quoted:
Found these in the back of an old rusted out truck on a elk hunt. http://AR15.Com/media/mediaFiles/201401/old-vises-100921.JPG View Quote Those are cool. Never seen any visegrips like that. |
|
BARCALO BUFFALO USA Cutting Plier
These are my grandfather's who lived in Buffalo in the early 1900's. The story begins back in 1896 when a young bookkeeper for the Buffalo Brass and Iron Bedstead Company, Edward Barcalo, founded a business in Buffalo’s Black Rock neighborhood that eventually became the Barcalo Manufacturing Company. The company originally made a wide range of metal products including beds, cribs and outdoor furniture. After a 1914 acquisition, Barcalo began forging tools and other products and was soon supplying the Curtiss-Wright Company and Buffalo’s budding aviation industry. During World War I, the company provided the vast majority of all American aviation forgings. View Quote The tool division was sold that year to Crescent Niagara which had been created to purchase the famous Crescent Tool Company in Jamestown. View Quote Attached File |
|
Quoted:
A few more. 1928 South Bend Junior 9" lathe on some kind of (well made) funky rolling stand. All original, awaiting restoration. A ~1910 Barnes variable speed friction drive "camelback" bench top drill press. Also included is the dismembered corpse of a circa 1906 Brown & Sharp #1 Vertical Spindle Milling Machine. This is one of 2 known extant amongst B&S collectors, the other is in Europe. This is undergoing a long term concours-level restoration, all the way down to scraping in all bearing surfaces. I guess the Barnes DP doesn't get it's day in the sun since photobucket sucks.... View Quote I've got an old South Bend lathe sorta similar to that. Unsure on the age of it. My grandpa got it from GE when they closed the factory here years ago. |
|
Here is another of my grandfather's tools about 100 years old. Unsure of manufacturer.
Attached File |
|
Some odds and ends.
Millers Falls 1-2" mic. This model listed for $11.50 in the 1949 Millers Falls catalog. Still precise. Millers Falls was bought by Ingersoll Rand in 1962. Attached File Shingle hatchets. I found the top one with a metal detector at a old house site. Cleaned it up using electrolysis. Both only have made in USA markings. Attached File Draw knife that belonged to my grandfather. Only marking is "Made in Germany". Attached File Stay tuned I will round up some more pictures. I am still in the basement, I haven't even been in the shop yet. |
|
|
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.