User Panel
Real feel is 99 degrees. Ohio is a cruel bitch.
Think I'll stay inside and have a cold Mexican beer. |
|
|
|
Quoted:
102 here Doggo can't figure out why she can't play outside View Quote View All Quotes View All Quotes Quoted:
Quoted:
Real feel is 99 degrees. Ohio is a cruel bitch. Think I'll stay inside and have a cold Mexican beer. 102 here Doggo can't figure out why she can't play outside The humidity is 60%. Shits a little outrageous. I think I'm gonna send the wife after a kiddie pool. Fill that bitch up and set it in the garage floor. |
|
New hunting club this year. Guy that talked me into joining is a diehard duramax guy. 8" lift, 37s, programmer. "Baddest diesel in town" to quote him.
4 of us load up our 4wheelers and he's going to pull the trailer. I decide to just drive my truck because I'm on call. He makes it 4 miles down the road and his truck dies. Says its losing prime. Reprimes fuel, goes to pull out, and dies again. Wind up just using my truck, and leaving the Chevy on the side of the road. So for 6 hours he caught hell from a he rest of us |
|
Quoted:
New hunting club this year. Guy that talked me into joining is a diehard duramax guy. 8" lift, 37s, programmer. "Baddest diesel in town" to quote him. 4 of us load up our 4wheelers and he's going to pull the trailer. I decide to just drive my truck because I'm on call. He makes it 4 miles down the road and his truck dies. Says its losing prime. Reprimes fuel, goes to pull out, and dies again. Wind up just using my truck, and leaving the Chevy on the side of the road. So for 6 hours he caught hell from a he rest of us View Quote Duramax |
|
Quoted:
Quoted:
New hunting club this year. Guy that talked me into joining is a diehard duramax guy. 8" lift, 37s, programmer. "Baddest diesel in town" to quote him. 4 of us load up our 4wheelers and he's going to pull the trailer. I decide to just drive my truck because I'm on call. He makes it 4 miles down the road and his truck dies. Says its losing prime. Reprimes fuel, goes to pull out, and dies again. Wind up just using my truck, and leaving the Chevy on the side of the road. So for 6 hours he caught hell from a he rest of us Duramax Yup |
|
|
|
Quoted:
I just cant seem to like it. Just put my shit in totes Also if u go offroad at all the flex n hit the cab View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Took cap off truck I wanna get a cap I just cant seem to like it. Just put my shit in totes Also if u go offroad at all the flex n hit the cab I want it for hunting trips so I don't need to unload my truck when stoping overnight between destinations . |
|
|
|
Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver?
I got some warped boards that need some torque applied to them |
|
|
Supposed to hit the low 100's today and I have my cousin's outdoor wedding to go to.
|
|
Quoted:
Yeah some heavy duty shit with a T25 head View Quote View All Quotes View All Quotes Quoted:
Quoted:
Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well |
|
Quoted: The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well |
|
Quoted:
Quoted:
Quoted:
Quoted:
Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well Not stripping so much as shattering the bits |
|
Quoted:
The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well I'm all T25 now. The screw will bury deep before it loses grip. They're the shit. |
|
Quoted: Not stripping so much as shattering the bits View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well Not stripping so much as shattering the bits |
|
Quoted:
I'm all T25 now. The screw will bury deep before it loses grip. They're the shit. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Anyone make a deck screw that won't snap off when you use an 18 volt 1/4" impact driver? I got some warped boards that need some torque applied to them Yeah some heavy duty shit with a T25 head The torx bits seem to hold up to an impact driver okay? I go threw a lot of #2 phillips bits as well I'm all T25 now. The screw will bury deep before it loses grip. They're the shit. As long as the shanks don't snap off I'll take it |
|
And get the short bits. The long ones are crap and tend to break easier.
|
|
Sounds like it's time to do a little shopping at the Home Depot and get good bits and a box of deck screws.
|
|
|
|
|
Quoted:
just got back from hd . needed a boiler vent . fucker was leaking bad View Quote View All Quotes View All Quotes Quoted:
Quoted:
Sounds like it's time to do a little shopping at the Home Depot and get good bits and a box of deck screws. just got back from hd . needed a boiler vent . fucker was leaking bad Damn it, you could have saved me a trip |
|
Quoted:
Damn it, you could have saved me a trip View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Sounds like it's time to do a little shopping at the Home Depot and get good bits and a box of deck screws. just got back from hd . needed a boiler vent . fucker was leaking bad Damn it, you could have saved me a trip ill get ya next time |
|
|
|
|
Quoted: Just remember, no project is done until the third trip to Home Depot View Quote View All Quotes View All Quotes Quoted: Quoted: Sounds like it's time to do a little shopping at the Home Depot and get good bits and a box of deck screws. Just remember, no project is done until the third trip to Home Depot |
|
Quoted:
Quoted:
Well, looks like BCM is off of my preferred vendors list. Tell us more. They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there |
|
Quoted:
They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Well, looks like BCM is off of my preferred vendors list. Tell us more. They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there And? |
|
Quoted:
Quoted:
Quoted:
Quoted:
Well, looks like BCM is off of my preferred vendors list. Tell us more. They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there And? And that means I can't order parts from them for existing builds. Or replacement parts. Nothing illegal about it. |
|
Quoted:
They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Well, looks like BCM is off of my preferred vendors list. Tell us more. They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there Companies can be real dilholes. A lot of places won't ship mags to IL even though it's legal, pisses me off. Midway is one of them. |
|
Quoted:
Companies can be real dilholes. A lot of places won't ship mags to IL even though it's legal, pisses me off. Midway is one of them. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Well, looks like BCM is off of my preferred vendors list. Tell us more. They took MA off of their states they ship to list. For everything. Eta- Go in to the drop down list to get shipping prices, MA isn't there Companies can be real dilholes. A lot of places won't ship mags to IL even though it's legal, pisses me off. Midway is one of them. Yup. BCM has been good to deal with up until now. Heck, I have a BCM upper waiting for me at FedEx, that I ordered last weekend before all this shit happened. Would have had it yesterday, but I put a hold on the delivery as I was out of town to protest in Boston. |
|
|
|
|
|
Quoted:
Borzoi. What we may be getting. http://www.puppyou.com/wp-content/uploads/bo/borzoi-borzoi-dog-pics-breed.jpg View Quote View All Quotes View All Quotes Quoted:
Borzoi. What we may be getting. http://www.puppyou.com/wp-content/uploads/bo/borzoi-borzoi-dog-pics-breed.jpg Does that one speak only in riddles? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.