Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
2/23/2017 5:55:53 PM
Posted: 4/6/2001 11:05:00 AM EST
[Last Edit: 4/6/2001 12:02:53 PM EST by Sancho Panza]
Got my pre-ban Bushmaster back from Walter last week. Had an extra upper and 5 mags refinished by him as well. Had the lower, uppers, and barrels (Colt 20" 1/7 A2 and 1/7 HBAR) done in Green-T, with the sights, compensators, switches, mags and other parts done in Black-T. Needless to say my rifle is now very beautiful. No more Bushmaster Purple for me. The rifle and mags were completely disasembled and refinished inside and out, including all springs. But, of course, not the chrome lined parts like the bore, chamber, firing pin, and part of the insides of the bolt carriers. The range numbers and lines were painted white, along with the safety indicator and the words safe on both sides. Fire was done in red. Cost to me $215, customer pick up. Please note: Walter is NOT doing any more Green-T for now, because of a supplier problem, but hopes to have that problem resolved in the next 2-4 months. Have not had a chance to re zero the uppers, and d%#* it, the crappie are biting, so looks like it'll have to be Sunday. Walter Birdsong and Associates 1435 Monterey Road Florence, Mississippi 39073 (601) 939-7448
Link Posted: 4/6/2001 11:42:50 AM EST
Now, if he'll just develop Grey-T for Colts.
Link Posted: 4/6/2001 2:32:59 PM EST
Just got my stuff back too. It took a little while (2+ months) but it is OUT-STAND-ING work!! Mucho-bonita eh Sancho??
Link Posted: 4/7/2001 5:40:51 PM EST
Si, Gene! He's had mine ready for a couple or 3 weeks, but thought I had 3 uppers (I confused him) so kept looking for the 3d upper. Did you get Green-T or Black-T? Or both?
Link Posted: 4/7/2001 6:09:25 PM EST
Black & beautiful! He told me that all of the Green T was being used to coat a batch of S&W custom guns. I will get some of that next time around I guess. Sancho esta Kendall, Si????
Link Posted: 4/8/2001 3:01:12 PM EST
[Last Edit: 4/8/2001 3:05:28 PM EST by Sancho Panza]
He told me the same thing, and showed me the S&W .45s, which he said are for the FBI. He also showed me his, which S&W gave him. But, he said he had enough Green-T to do my two uppers and lower. I know a long time friend of his, which didn't hurt. But he said he didn't have enough to do my PWA in Green-T when I picked the BM up. Check back in 2 months. Big problem with his supplier, who wanted him to buy in lots bigger than he could use before they go bad. So he thinks he may have a new supplier, but the details aren't ironed out yet. Could be? No hablo espanol.
Link Posted: 4/8/2001 7:16:31 PM EST
I have had a Sterling made ArmaLite AR180, a preban AR15 rifle as well as a carbine, and several handguns done by him. They look great and boy do they function smoothly with no lubrication. Let several people fire the 180 today and they were amazed at how smooth it functioned with no lube and they also thought it was gorgeous. Looks like a brand new rifle.
Link Posted: 4/8/2001 7:23:48 PM EST
Link Posted: 4/8/2001 10:16:44 PM EST
Any chance we can see some photos of Mr. Birdsong's fine work???
Link Posted: 4/9/2001 4:52:52 AM EST
NY Patriot, if I can figure out how to do it on this site, I will post some this evening. However, a photo won't really do it justice. You have really be able to see up close all the detail that he pays to the internals as well as externals. Anyway, I will try to do so.
Link Posted: 4/27/2001 5:26:45 AM EST
Top for Door Kicker.
Link Posted: 4/27/2001 6:33:01 AM EST
How tough exactly are the coatings he uses? Anyone know what the materials he uses actually are? How does it compare to other refinishers work?
Link Posted: 4/27/2001 7:04:13 AM EST
M4, the T is for Teflon. I'm sure the exact composition is a trade secret. Can't compare it to anything else, because I don't have theirs. But it's tough enough for the FBI and Navy Seals, among others.
Link Posted: 4/27/2001 7:38:09 AM EST
Originally Posted By Sancho Panza: M4, the T is for Teflon. I'm sure the exact composition is a trade secret. Can't compare it to anything else, because I don't have theirs. But it's tough enough for the FBI and Navy Seals, among others.
View Quote
Really? Birdsong does these coatings for the military? Let me ask the question in another way.... How does the Birdsong finishes compare to,say, a factory new Bushmaster finish?
Link Posted: 4/27/2001 7:54:43 AM EST
[Last Edit: 4/27/2001 7:55:46 AM EST by Sancho Panza]
Much tougher than Bushmaster or Colt finishes. The process also made my safety and trigger MUCH smoother. Also, the finish will not shine, but rather remain medium flat, no matter how much Break Free CLP you on it. It really won't stick to the finish, although I insist on putting it on anyway. The only problem I've had is the front push pin is difficult to pull out, to remove or switch uppers. Think they got a little to much Green-T on the inside of the hole. Walter told me the Green-T is a little thicker than the Black-T. Says that's why on a Green-T upper and lower, they prefer (insist) to use Black-T on the switches, et c. Give him a call, he's delightful, and will answer all your questions. They do go to lunch from Noon until 1 p.m. Central.
Link Posted: 5/17/2001 2:37:31 AM EST
Is there a web page for Walter Birdsong? Anyone have a Birdsong finish on their pistol barrel? If so how does it hold up to slide wear?
Link Posted: 5/17/2001 2:46:00 AM EST
in some of the new gun rags i've seen pictures of a new Wilson CQB which is green and black....is this the stuff you're talking about here??? if so it is really cool--that green 45 auto made my check writing finger itch....I just put green furniture from RRA on one of my ARs and a green receiver would really be cool....Dick
Link Posted: 5/17/2001 3:15:43 AM EST
Wilson's catalog says what they use is called Armor Tuff. How closely it reseambles Black-T or Green-T chemically I haven't a clue. Based on cost I would say that Black-T is more expensive then Armor Tuff but with that expense probably comes far better performance.
Link Posted: 5/17/2001 9:43:32 AM EST
Anyone found a web site yet? Jus thought I'd try one last time.
Link Posted: 5/17/2001 11:14:29 AM EST
can we see pics please... [:)]
Link Posted: 5/17/2001 1:05:39 PM EST
Sorry, Walter has no website, and I have no digital camera.
Top Top