TNVC
is excited to announce that we are now offering the MOD3 Night Vision
Goggle from AB Night Vision Inc. This is the most modular NVG ever!
The MOD3 is a full spectrum goggle that provides the user a
complete, purpose-built binocular night vision device that can be
quickly broken down into two complete monoculars. The process takes
less time than do the same operation with a dual monocular setup.
The MOD-3 is a revolutionary new night vision system. Until now you
could either have a binocular or monocular. Using a bridge adapter to
utilize two monoculars as a binocular has been done for years, but it
has significant drawbacks. The weight of such a unit is over 800 grams,
and they typically cannot be collimated. Many people enjoy using two
monoculars when hunting. One on a neck lanyard for spotting, and one on
their rifle. Yet most wish to avoid the cost of purchasing a binocular
and two monoculars.
The MOD-3 overcomes these problems by utilizing Optical Pods that
are waterproof, Nitrogen purged units that can be installed into either a
monocular or binocular. Power is conducted to the intensifier tube and
indicator LEDs by means of spring loaded, gold plated contacts. Even the
springs are gold plated to prevent corrosion.
The Optical Pods can be assembled in the MOD-3 Binocular Bridge to
form a full function binocular. A latching mechanism firmly holds the
Optical Pods in place and is easily manipulated with one finger.
Installing or removing the Optical Pods is accomplished in just a couple
seconds.
The Binocular Bridge has the features you expect to find on a night
vision Binocular. It has IP adjustment, dovetail mount, IR LED, IR LED
"on” indicator lights in the viewing plane, and low battery warning.
The same style gold plated contacts that conduct power to the
Optical Pods are also utilized in the Bridge assembly. These conduct
power from the Optical Pods to a circuit board and eliminates the need
for wires in the joint which moves as you change IP adjustment. This
prevents any problems with wires breaking and failing in this area.
The IP adjustment (to match the distance between your eyes) is
accomplished through IP screws such as the AVS goggles employ. The
screws have ball detent ‘bumps’ as they are rotated, preventing
vibrations from accidentally changing your settings. The MOD-3 Binocular
can be collimated and weighs in at 618 grams.
The other half of the MOD-3 system is the MOD-3 Monocular Adapter.
This adapts an Optical Pod into a full function monocular. It has the
same circuitry as the Binocular Bridge which means you have a flood IR
LED, IR "on” indicator, and low battery indicator. It uses the 3V
lithium battery as well. It also accepts the IR Spot/Flood adapters like
the PVS-7 goggles use.
Like the Binocular Bridge, the Monocular Adapter releases the
Optical pod with the press of one finger, allowing instant changeover
from monocular to binocular. The monocular housing is waterproof and has
a side mount like a PVS-14, allowing you to use it as you would any
other monocular with head and weapon mounts. The monocular is 75 grams
lighter than a PVS-14.
The MOD3 is one of the most innovative goggle systems on the market.
TNVC assembles the MOD3 with the highest quality and highest spec
image tubes on the market. All MOD3 kits come complete with two full
assembled Optic Pods with MILSPEC PVS-14 Objective and Eye Piece Lenses,
One Binocular Bridge, and two Monocular Adapters. The Binocular bridge
will attach to any dovetail night vision mount interface while the
monocular adapters simply require the addition of any PVS-14 J-Arm to
attach to a helmet mount.
Available NOW $6,899.00