Anyone who has ever worn an Ear-Pro or Communications Headset under a
helmet knows it sucks. It’s a necessity, but it sucks. The head band
digs into the top of your head and pinches your temples; causing an
annoying discomfort that can, at best: make you uncomfortable during a
training class, and at worst: take your mind off the mission downrange.
For many shooters, this problem was solved when helmet rail adapters
were developed for electronic headsets. But, this only helped the
population that sported Peltor COMTAC’s. What about those that ran MSA
Sordin-based systems?
Enter the SARA: Sordin ARC Rail Adapter from Iron Forged Concepts.
Like all good design, it was born of necessity by an innovative shooter
with a helmet and a headset. The SARA is a simple drop-in replacement
to the Sordin headband and neckband stems that will interface with the
proven Peltor Helmet Rail Adapters. These precision machined parts are
user-installed with simple tools in about 30-45 minutes. They require a
minor dis-assembly of the ear cups during installation. Once
installed, the SARA’s accept the stems on the Peltor COMTAC Rail
Adapters, allowing you to mount your Sordins directly to your helmet’s
Ops Core ARC or Team Wendy Rails. The added comfort this provides
cannot be measured and you will wonder how you ever ran a helmet with a
headset jammed underneath.
SARA’s are user-installed and available for both Over-The-Head and
Behind-The-Head units. The modification is not permanent and the
headset can be reverted to its original configuration at any time.
Tools Needed for Installation: Knife or Razor
Blade, H15 Hex Bit (Screwdriver Head), Torx T8 Bit, Lineman’s Pliers (or
similar) with diagonal cutters, Split Ring Pliers (90deg w/ 0.036?
Tips).
Installation: Installation can be tricky if you do
not have the proper tools. Do not half-ass it. If you do not have the
proper tools, go get them. TNVC and Iron Forged Concepts are not
responsible for damaged headsets during SARA installation. Each package
comes complete with 4 SARA’s and 4 extra Split Retaining Rings (in case
the factory rings are damaged during dis-assembly). The Neck Band
version also includes two ESS Posts. For step-by-step installation
instructions, please check out this awesome video from Firelance Media:
http://ironforgedconcepts.com/?project=installation
Basically, the SARA is the best thing to happen to the MSA/Sordin
headset. These U.S. made parts will completely transform the way you
run a helmet with COMMs. The more comfortable your gear, the better
able you are to maintain situational awareness. This will help you have
more fun in the field during a hunt or stay alive in the field during a
fight.
Please note: SARA’s are adapters only. They still require the Peltor Helmet Rail Adapters, also available from TNVC.