User Panel
[Last Edit: liezone]
[#1]
Originally Posted By bigbore: Originally Posted By liezone: It's been almost three weeks on a CMMG .22 Barrel to be cut and threaded and a Rainier SS barrel to be crowned. No word yet. I also printed the invoice with a detailed explanation and put it in the well packaged box. Hope to hear something soon. check your spam folder for emails from either steve or orders @ adcofirearms.com I'll resend the emails tonight. My order was placed on 2/3 but I fat fingered my email, so I sent you an email with an explanation and email correction. You responded on 2/4 "Received". The email correction was changing the end from .usq to .us Everything else should work. Thanks for the help. I will IM my email. ETA: Nothing in spam and I found the FedEx tracking #. It was delivered on 2/8 and signed for by STHOMPSON. I'll send the tracking # if you want it. Thanks again. |
|
The sheep would much rather have the sheepdog cash in his fangs, spray paint himself white, and go, “Baa.”
Until the wolf shows up. Then the entire flock tries desperately to hide behind one lonely sheepdog. (Lt. Col. Dave Grossman) |
[#2]
After I got my act together. Steve took care of me and my barrels are in the process of being shipped. Just to clairify, there were several reasons my order took so long and they were all my fault. Thanks again Steve.
|
|
The sheep would much rather have the sheepdog cash in his fangs, spray paint himself white, and go, “Baa.”
Until the wolf shows up. Then the entire flock tries desperately to hide behind one lonely sheepdog. (Lt. Col. Dave Grossman) |
[#3]
Is checking the bolt headspace included in your 'upper assembly any upper assembled from parts' ?
|
|
|
[#4]
With a No-Go gauge, yes.
|
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[Last Edit: tex7488]
[#5]
edited: forgot to send them everything! i'm an idiot. |
|
|
[#6]
Sent email. Thank you.
|
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[#7]
Getting ready to send a box of upper parts for assembly. I couldn't find online where to order gas key staking for shop services. What do I need to do and how much is it?
|
|
"You know what I think, don't really matter what I think. Once that first bullet goes past your head, politics and all that shit, just goes right out the window." -Hoot
|
[#8]
Originally Posted By RFutch:
Getting ready to send a box of upper parts for assembly. I couldn't find online where to order gas key staking for shop services. What do I need to do and how much is it? just add a note in the comment section. |
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#9]
I need to send a barrel in for threading and M4 feed ramps (impossible to find a standard flat top upper!). Do you need an upper to match the feed ramps to the receiver?
Thanks.
|
|
"Y'all are a bunch of fucking liars. Most of you would fuck a doughnut rolling across the floor let alone a fat woman who stood still long enough." -anesvick
|
[#10]
No, unless you want it perfectly matched (which is NOT necessary at all).
|
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[#11]
If I'm looking to pin a bcm comp 1 to a bcm barrel using a bcm gas block and a bcm standard barrel nut with a bcm gas tube all onto an upper ....
Does the pin service and assembly service cover all that? (The plan is to use Cent C4 handguards. Want those too?) |
|
Dan
Psalm 91:7 A thousand may fall at your side, ten thousand at your right hand, but it will not come near you. [img]icon_smile.gif[/img] |
[#12]
Not sure i get the jist of your question, but i'll give a shot at an answer. We will put those parts, onto your barrel with the Perm Muzzle Device service (no need for the Assembly service if we are sending it back as just the barrel assembly). You will need an assembly service, if you need those parts assembled into a complete upper.
Hope that answered your question, if not, feel free to let me know. |
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[#13]
Just want to make sure there wasn't some other service I needed to throw on
|
|
Dan
Originally Posted By GoatBoy: If the Spartan smiths had this type of tool for their weapons, they would have screamed, "COME AND MAKE THEM!" |
[Last Edit: whiplash10]
[#14]
ETA: nevermind!
|
|
|
[#15]
I was looking to send in my upper parts to have them assembled but I had a question. Can you guys dimple a nitrided barrel for a gas block with set screws?
|
|
|
[#16]
Originally Posted By PropDoc:
Not sure i get the jist of your question, but i'll give a shot at an answer. We will put those parts, onto your barrel with the Perm Muzzle Device service (no need for the Assembly service if we are sending it back as just the barrel assembly). You will need an assembly service, if you need those parts assembled into a complete upper. Hope that answered your question, if not, feel free to let me know. Ok, I've narrowed down what I need: Parts: BCM Comp 1 Muzzle Device, includes washer and pin BCM 14.5 middy stripped barrel BCM 0.750 gas block, includes hex screws BCM gas tube, includes pin Barrel nut (for CMR rail) Services needed: 1. Permapin MD onto barrel 2. SHAVE gas block bottom to maximize space between gas block base and the rail. As much as possible that won't affect gas block durability. Current base thickness stands at 0.186. I'm hoping that you've done this before and already know how far it can go. 3. Pin gas tube Which online service would be in addition to the perm attach service? |
|
Dan
Originally Posted By GoatBoy: If the Spartan smiths had this type of tool for their weapons, they would have screamed, "COME AND MAKE THEM!" |
[#17]
Low pro gas blocks are already down as far a prudent, we won't shave them more.
As for the gas tube pin, just note with the Perm Muzzle Device order, and we will install the pin, no extra. |
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[#18]
Looking to send in a brand new 14.5" noveske barrel to have a surefire mb556k-pn perm attached. Here are my questions:
1. The noveske barrel has a gas block on it now, will you remove it temporarily to get my urx barrel nut on, then reinstall it, before perm. attaching the MB? Is that something that's included in the pinning muzzle break price? 2. How much extra would it be to have you assemble above barrel, urx3.1, and brand new upper receiver? (all parts NIB) |
|
Did they get you to trade your heroes for ghosts? Hot ashes for trees? Hot air for a cool breeze? Cold comfort for change...
|
[#19]
I placed a shop service order online with you today but didn't read the FAQ's regarding no notes in the box only use the comment section when sending in my upper. Start of this thread looks like you use to require letters in box but now you have gotten away from that. I have the upper in the box and a letter in the box all ready to go but nothing in the comment note section of my order. How would you like me to proceed?
Order #53757783. Requsted services are to have you; Removed Battle Comp 1.5. Remove Troy VTAC 13" Handguard. Install Centurion CMR 14" Handguard. Install new Battle Comp 1.5. |
|
www.EmergencyRigs.net
|
[#20]
Nevermind, Steve fixed.
|
|
www.EmergencyRigs.net
|
[#21]
Order placed and barrel sent. Your FAQ's mention insurance, butI did not see an option for insurance during checkout. Did something change, or did I screw up?
|
|
|
[#22]
|
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#23]
Your online order form link is not working for me.
|
|
|
[#24]
|
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#25]
|
|
Nothing in this post should be considered information posted in an official capacity. It is the authors personal opinion alone.
|
[#26]
I just tried it, looks fine to me.
|
|
(AKA Junior)
Gunsmith for ADCO |
[#27]
I have a 6.8 barrel I would like to lighten up under the handguards. The website states:
AR barrel-under handguard or in front of FSB $65.00 Parkerizing included in price. You must also select the appropriate assembly/disassembly service if the barrel is sent as part of a complete upper. Unless a specific contour is noted in the comment section the barrel will receive our standard medium weight contour. I was just wondering what diameter the "standard medium weight contour" is? Thanks |
|
"You know what I think, don't really matter what I think. Once that first bullet goes past your head, politics and all that shit, just goes right out the window." -Hoot
|
[#28]
Originally Posted By RFutch:
I have a 6.8 barrel I would like to lighten up under the handguards. The website states: AR barrel-under handguard or in front of FSB $65.00 Parkerizing included in price. You must also select the appropriate assembly/disassembly service if the barrel is sent as part of a complete upper. Unless a specific contour is noted in the comment section the barrel will receive our standard medium weight contour. I was just wondering what diameter the "standard medium weight contour" is? Thanks View Quote .700 ish |
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#29]
Originally Posted By bigbore:
Originally Posted By RFutch:
I have a 6.8 barrel I would like to lighten up under the handguards. The website states: AR barrel-under handguard or in front of FSB $65.00 Parkerizing included in price. You must also select the appropriate assembly/disassembly service if the barrel is sent as part of a complete upper. Unless a specific contour is noted in the comment section the barrel will receive our standard medium weight contour. I was just wondering what diameter the "standard medium weight contour" is? Thanks .700 ish One followup question. My barrel is approximately .850 under the handguards with a midlength gas system. Do you have any rough idea of how much weight I would cut off if we turned it down to around .675 under the handguards? |
|
"You know what I think, don't really matter what I think. Once that first bullet goes past your head, politics and all that shit, just goes right out the window." -Hoot
|
[#30]
Couple questions before I place my order/ship.
I shaved my own Fsb. If I choose the service, will you clean it up and repark it? I'm sending my upper to have the threads checked and a muzzle device permanently attached.I have a free float rail installed, do you have to remove the barrel nut to check thread concentricty and perm a break? |
|
|
[#31]
Hi,
Is this enough info for sending my barrel in for threading service? Taurus PT92 9mm - 1/2-28 threaded barrel - 5/16" long? (please let me know if this 5/16" length is correct for this configuration) Gemtech GM-9 suppressor What is current turn-around time? Thanks |
|
|
[#32]
350zrb, The std for B92 is 0.330 long, our current turnaround is 5-7 business days.
|
|
Gunsmith for ADCO
|
[#33]
To have an Izzy FH removed from a 14.5" barrel, do you need a copy of the SBR tax stamp sent with the upper?
|
|
|
[#34]
|
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#35]
Originally Posted By bigbore: If you send just the upper, no. View Quote View All Quotes View All Quotes Originally Posted By bigbore: Originally Posted By -Watcher-: To have an Izzy FH removed from a 14.5" barrel, do you need a copy of the SBR tax stamp sent with the upper? If you send just the upper, no. Do you need me to send the URX fixture and tool to install a URX II? |
|
|
[#36]
Originally Posted By -Watcher-:
Do you need me to send the URX fixture and tool to install a URX II? View Quote View All Quotes View All Quotes Originally Posted By -Watcher-:
Originally Posted By bigbore:
Originally Posted By -Watcher-:
To have an Izzy FH removed from a 14.5" barrel, do you need a copy of the SBR tax stamp sent with the upper? If you send just the upper, no. Do you need me to send the URX fixture and tool to install a URX II? you can if you want, but not necessary. |
|
I'm no good at telling people what they want to hear when I dont believe it myself :)
|
[#37]
Hello. I ordered a bbl, gas block, and gas tube....as well as the shop service of gas block dimples being added that will allow the installation of the latter 2 items onto the former (order: 34759164). I'm not mailing parts in to you guys...you already have them. Based on the "if you ordered shop services, you need to sign the form and send it in with the parts" (I forget the exact language), I printed the email, signed it, scanned it, and then emailed it to Steve. Is that an acceptable way to authorize such shop services or do I need to mail or FAX the signed form in? That part was a little confusing...the directions seemed to presume that I am mailing parts in, but in my case I'm not...I'm ordering them direct from you guys...
|
|
|
[#38]
Your good. It has to do with the addition of actual shipping for Shop work sent in. If you are purchasing the items to be worked on through us, shipping is not actual and was added at checkout.
|
|
May the earth not rise up to smite thee.
Tell me again, why do illegal aliens have our rights?? Instead of baning guns, let's ban using them in a crime. www.adcofirearms.com |
[#39]
Copy that, thanks much!
Posted Via AR15.Com Mobile |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.