Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Posted: 12/4/2023 11:43:01 AM EDT
What are readers preferred reload powders for 9mm? And why.
Link Posted: 12/4/2023 11:47:33 AM EDT
[#1]
Unique.
Link Posted: 12/4/2023 11:48:44 AM EDT
[Last Edit: -Obsessed-] [#2]
True Blue.

Consistent, meters like water, not dirty.
Link Posted: 12/4/2023 11:51:32 AM EDT
[#3]
I've used WSF or CFE Pistol for quite a while and always had good luck with them.  Recently trying 244 as it's available and I found 4lbs at a big box store for a good price.
Link Posted: 12/4/2023 11:55:04 AM EDT
[#4]
Moving from Unique to CFE.

Unique is holding up to it’s name. These days it’s so unique to find one.
Link Posted: 12/4/2023 12:01:22 PM EDT
[Last Edit: Southrnshooter] [#5]
I’ve used HP-38, Power Pistol, and True Blue.  

But after trying CFE, I really like it.  I’ve compared it to True Blue and sandbagged I’m getting better accuracy with the same components and CFE.  Especially in my Gen 5 Glock 19.  YMMV.

Plus CFE is not as expensive “usually” and it’s pretty available.

Originally Posted By riksors:
Moving from Unique to CFE.

Unique is holding up to it’s name. These days it’s so unique to find one.
View Quote


Ain’t that the TRUTH…!!  I still love Unique for 44 mag lead loads and 45 Colt.  I found 2 pounds locally a while back and snatched them up, but they were the only ones I’ve seen anywhere since the coof.
Link Posted: 12/4/2023 1:10:36 PM EDT
[#6]
Unique or tightgroup.
Verify EVERY charge!
Link Posted: 12/4/2023 2:19:17 PM EDT
[#7]
Using Longshot for 147gr and 124gr Gold Dots. Longshot pushes the 147s high enough to exceed most Hollow Point maker's velocity recommendations while not being too high pressure. It burns clean and is very accurate. It does the same for the 124s, but HS-6 is a bit better.

For 1245gr and 115gr plinking loads I use HS-6.
Link Posted: 12/4/2023 3:05:09 PM EDT
[#8]
W231 I use it for 45 acp and 9mm burns clean and shoots consistent
Link Posted: 12/4/2023 4:50:49 PM EDT
[#9]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MarkHatfield:
Unique.
View Quote


+1 !
Link Posted: 12/4/2023 6:58:34 PM EDT
[#10]
I found CFE, and like it.
Link Posted: 12/4/2023 7:30:09 PM EDT
[#11]
These days it is whatever you can find at a not insane price !
I have used 231, accurate #5, HP 38,bullseye unique and many others
Right now working on a supply of auto comp
I will use anything that functions and allows the accuracy standards I need.
Was too long ago I recall paying $15 a pound for powder, now it is about twice that or more.
Link Posted: 12/4/2023 8:02:03 PM EDT
[#12]
In order from most used by me to least:
W-231
CFE
WSF
Promo
Longshot
Link Posted: 12/4/2023 8:57:33 PM EDT
[#13]
I have..

WSF
True Blue
N320
N330
N340
Silhouette

Ive loaded probably 6000 or more with WSF and it meters well and it is versatile.
Good for 147 subsonic and 124g JHP and FMJ RN.

I am migrating to VV powders for cleaner brass.

Link Posted: 12/5/2023 1:03:30 PM EDT
[#14]
I like CFE Pistol, but W244 was more available and cheaper during the shortages the past few years. It's adequate for my plinking loads.
Link Posted: 12/5/2023 6:13:49 PM EDT
[#15]
Been using Titegroup for years with a 124 grain bullet . No complaints.
Link Posted: 12/13/2023 11:13:50 AM EDT
[#16]
CFE Pistol. It shoots well in every gun and it's versatile so I can use it in almost all my pistol calibers. 38's still get bullseye though along with a few other pistol calibers that get specific powders.
Link Posted: 12/15/2023 7:39:09 PM EDT
[#17]
Loaded a lot of 9mm with Titegroup. However, I'm out of that now and have a 4lb jug of W244 to try.
Link Posted: 12/24/2023 9:11:59 PM EDT
[#18]
I used to use mainly Unique, but am using HP-38 / W 231 now.

I think it burns a little cleaner, but I would go back to Unique if I couldn’t get more HP-38.
Link Posted: 12/24/2023 9:19:56 PM EDT
[Last Edit: Iseifert] [#19]
I use longshot. I use it because I was given 4 lbs of it and I liked it enough to keep using it.

I use to use titegroup and still do, but it flashed a lot and I got a suppressor. The longshot doesn’t flash as much.
Link Posted: 1/10/2024 9:38:12 PM EDT
[#20]
Been switching to CFE

Link Posted: 1/12/2024 11:12:05 PM EDT
[Last Edit: wmagrush] [#21]
Using 700x. Was recently given 6+ pounds, so figured might as well use it in 9mm. Have used 700x on and off since early ‘80s for shotgun and pistol. Also use Red Dot, which can be used in cast lead .30 cal plinking loads.

Reason is I load a lot of 12ga, so it works for slimming down powder varieties on hand.
Link Posted: 1/20/2024 4:36:35 PM EDT
[#22]
Originally Posted By Mathaaroneyy:
What are readers preferred reload powders for 9mm? And why.
View Quote


Depends on if I want to use an 'economical' powder or not to stretch the most round out of a single lb OR if I am loading for something that is comped and actually want more gasses (and powder volume)  to actually 'work' the compensator properly.

Would also depend on it I wanted to make powder puff loads or balls to the wall / max velocity possible loads.

There is no 'one powder fits all' solution here friend. Depends on the gun and what sort of loads you are wanting to make.

Bullseye, Zip, True Blue and AA#7 are what I mostly keep on hand for 9mm stuff.
Link Posted: 1/20/2024 4:53:37 PM EDT
[#23]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 1Devildog:
I like CFE Pistol, but W244 was more available and cheaper during the shortages the past few years. It's adequate for my plinking loads.
View Quote


I think I am at about 13lbs of Bullseye right now and it is not even a powder I 'prefer' to use or stock in any big way compared to others that I laid in heavy on but...

If push came to shove 13lbs x 7000 grains per lb / about 5 grains per round of 9mm = 18,000 rounds that could be sent down range if I ran out of the stuff I actually liked and had to fall back on it.


That is one of the great things about pistol powder - A little generally goes a long way! No reason to not buy an 8lb jug if you run across a particular kind that you like.

(an 8lber insulates you (depending on the volume you shoot obviously) big time from any potential shortages or price fluctuations)

Link Posted: 1/20/2024 4:55:53 PM EDT
[Last Edit: FALARAK] [#24]
VV N320 for me.

I used Titegroup before that.  It was just fine, just a lot dirtier.
Link Posted: 1/21/2024 11:15:37 AM EDT
[#25]
If they ever get this back in stock I’ll buy 2.  20$/lb shipped.
It was from CDVS.


Attachment Attached File
Link Posted: 1/21/2024 10:39:50 PM EDT
[#26]
I like W231.
Link Posted: 3/14/2024 5:59:48 PM EDT
[#27]
For past 39 years I have been reloading practically all my 45ACP and 9mm ammo with Winchester 231 or HP 38 powder.
Both are basically same powder.

Link Posted: 3/14/2024 8:29:51 PM EDT
[#28]
I use when I started reloading almost 30 years ago, Unique for most plinking loads.  Now, Win 231 since it meters better on my 550B.  I use VV 3N37 & single stage press for +P loads.  In my youthful stupidity, I tried getting 9mm FMJ (they were 90-99gr .380 projectiles) as fast as possible, for reasons that seemed….”fun” at the time.  I don’t do that any more, but still use VV 3N37 for “serious” loads.

I did the same with .223 .36gr Varmint Grenades in a 22” barrel, because I thought 4,000fps would be “fun.”   Accuracy was shit.  I don’t think I ever reached it & a fellow target shooter pointed out how I was burning up throats & shortening barrel life, which may have accounted for my shit accuracy.  I thought about it, and stopped.

Again—I don’t endorse stupid things….mostly.


But sometimes the retrospectoscope is how I realize my “stupid things.”
Link Posted: 3/22/2024 3:41:34 PM EDT
[#29]
Alliant powders are nowhere to be found.  Their prices have gone NUTS.

True Blue
CFE-Pistol
VV powders are so clean!
Link Posted: 3/22/2024 3:43:52 PM EDT
[Last Edit: rn22723] [#30]
Forgot AA #7
Link Posted: 3/22/2024 5:14:45 PM EDT
[#31]
I use Accurate #2 and Titegroup.  I just loaded some 10 MM with 180 grain FMJ FP with Accurate #5.  Since Hodgdon acquired Western/Accurate/Ramshot the prices have really gone up to the price of Hodgdon, same for Winchester and IMR.    Shooters World powders generally have been a little cheaper than Hodgdon.
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top