A lightly used electronic stabilizer with joystick. I used this with a Sony A7SIII for making some TV commercials, but that gig dried up and I don't have use for it anymore. Zelle preferred or PayPal friends/family.
Awarded best gimbal AND best pro-video equipment (out of 1,700 products) at NAB. It's simply the best professional camera stabilizer. Here's why:
Original Design: Designed from the ground up specifically for cinematography, not after thought like the rest of the gimbals on the market which put a handle onto the copter gimbal system.
Optically-centered: To minimize sensor movement avoid robotic look in footage found with other gimbals.
Eye-level Filming: Your hands is at the lens level, not a foot higher like other gimbals. This make shooting a lot fatigue.
Quick Balancing: It's a lot easier to balance each axis individually than making all 3 axis balance at the same time. Lens change is easier with simple adjustment of a single axis due to optical center design.
Flat-bottom Design: You can put the gimbal down between shots without needing a stand.
Intuitive Tilt Handle: The right handle of the gimbal acts as a joystick for tilting the camera up and down. This is the best loved feature.
Seamless Suitcase Mode Transition: Going from eye-level to low mode seamlessly by just letting go of the left handle.
Absolute Encoders: Prevent motors from losing their position during a bump. Improve stabilization precision. Adjust Dutch angle within a second by holding at the desired angle.
Custom Firmware
Made In USA
SPECIFICATIONS:
3-axis stabilization with encoded motors
RC 2nd Operator Mode (optional)
Payload up to 8lbs (up to 12lbs if the the setup is less than 8" long)
Weight:
Aluminum: 5.25lb without battery / 5.75lb with battery
Dimension: 16" (40 cm) span handle to handle
2,600mAh 14.8V Lithimum-ion battery and charger included (0.5lb)
Compatible with:
Mirrorless cameras
DSLR cameras
Mid-size cine cameras (setup must be compact)
Note:
Helix Jr. is wired according to US standards where red pin is Positive (+). Any 3rd-party power accessories must be compatible.