User Panel
User Panel
User Panel
IN, USA
|
Posted: 7/14/2023 9:15:14 AM EDT
[Last Edit: Mav3rick]
[#1]
Quote HistoryOriginally Posted By Engineer: Originally Posted By HansohnBrothers: Since there seem to be a lot of questions regarding wipes, the below is a list of wiped silencers, material used with durometer rating* and dimensions. If there are any models missing or erroneous data, please contact me and I'll update the list. AAC M9-QD Dead Air Ghost 60A Neoprene McMaster Carr Part Number: 6"x6" - 1370N15 1.20" x 1/8", 1/4" center McMaster Carr Part Number: 30mm (1.18") Hammer Driven Hole Punch - 3418A3 DeGroat Nano 80A Polyurethane McMaster Carr Part Number: 6"x6", 1/8" - 8716K24 6"x6", 1/4" - 8716K27 11/16" x 1/8" or 1/4", 3/16" center (optional) McMaster Carr Part Number: 11/16" Hammer Driven Hole Punch - 3427A18 Energetic Vox (S and K) 70A Fabric Reinforced Silicon McMaster Carr Part Number: 2"x36" - 3635K17 1-1/8" x 1/8" McMaster Carr Punch Part Number: 1-1/8" Hammer Driven Hole Punch - 3427A26 Gemtech Aurora and Aurora 2 65A Urethane 1" x 1/8" McMaster Carr Part Number: 1" Hammer Driven Hole Punch - 3427A24 Knights XM-9 70A Urethane 1" x 1/8" Thompson Machine Poseidon 50A Neoprene 15/16" x 1/8" (.45) McMaster Carr Part Number: 6"x6", 1/8" - 1370N15 15/16" x 1/4" (9mm) McMaster Carr Part Number: 6"x6", 1/4" - 1370N17 McMaster Carr Part Number: 15/16" Hammer Driven Hole Punch - 3427A23 Thompson Machine Wasp 50A Neoprene McMaster Carr Part Number: 6"x6", 1/8" - 1370N15 5/8" x 1/8" McMaster Carr Part Number: 5/8" Hammer Drive Hole Punch - 3427A17 *Durometer is used as a measure of hardness in polymers, elastomers and rubbers. Can you provide these part numbers for the wolfman please? |
|
|
IN, USA
|
Posted: 7/14/2023 9:17:03 AM EDT
[#2]
Originally Posted By HansohnBrothers: Since there seem to be a lot of questions regarding wipes, the below is a list of wiped silencers, material used with durometer rating* and dimensions. If there are any models missing or erroneous data, please contact me and I'll update the list. Dead Air Ghost 60A Neoprene 1.20" x 1/8", 1/4" center Dead Air Wolfman 70A Neoprene 5/8"~1" x 1/8", 1/4" center DeGroat Nano 80A Polyurethane 11/16" x 1/8" or 1/4", 3/16" center (optional) Energetic Vox (S and K) 70A Fabric Reinforced Silicon 1-1/8" x 1/8" Gemtech Aurora and Aurora II 65A Urethane 1" x 1/8" (center X cut) Knights XM-9 70A Urethane 1" x 1/8" Thompson Machine Poseidon 50A Neoprene 15/16" x 1/8" (.45) 15/16" x 1/4" (9mm) Thompson Machine Wasp 50A Neoprene 5/8" x 1/8" *Durometer is used as a measure of hardness in polymers, elastomers and rubbers. You're missing the REX MG22 Extreme Duty 22 suppressor. I found on another site it says Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17) Not sure if those McMaster Part #'s are correct. Tried look on REX's website but when I go into the suppressor section on their page I get a 404 error. Very weird. |
|
|
|
Posted: 7/14/2023 11:42:36 AM EDT
[#3]
Quote HistoryOriginally Posted By Outrider: I've been running neoprene in mine after Mageever recommended the material. |
|
|
|
|
Posted: 7/14/2023 12:07:35 PM EDT
[#4]
Quote HistoryOriginally Posted By Mav3rick: Can you provide these part numbers for the wolfman please?  Wolfman Wipes: A How To |
|
|
|
|
Posted: 7/14/2023 12:14:02 PM EDT
[Last Edit: HansohnBrothers]
[#5]
Quote HistoryOriginally Posted By Mav3rick: You're missing the REX MG22 Extreme Duty 22 suppressor. I found on another site it says Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17) Not sure if those McMaster Part #'s are correct. Tried look on REX's website but when I go into the suppressor section on their page I get a 404 error. Very weird. 5/8" x 1/8" McMaster-Carr item 5787T63 and Punch 3427a17 |
|
|
|
|
Posted: 7/14/2023 12:20:51 PM EDT
[Last Edit: HansohnBrothers]
[#6]
Quote HistoryOriginally Posted By bChau: Where do you get your neoprene from? Amazon also has neoprene in bulk . Also you can search 'neoprene fender washers' and look for the size you need. |
|
|
|
|
Posted: 7/14/2023 1:19:56 PM EDT
[#7]
Quote HistoryOriginally Posted By HansohnBrothers: If you want red, check out the silicone available from McMaster. https://www.mcmaster.com/catalog/129/4014/5787T63 Amazon also has neoprene in bulk . Also you can search 'neoprene fender washers' and look for the size you need. I've been using neoprene fender washers to replace the end cap wipe for the DA Wolfman I have. Wish I could do the same for the XM9, but it needs some without a hole in the middle.  |
|
|
|
|
Posted: 7/14/2023 1:26:18 PM EDT
[#8]
I’ve just standardized on neoprene and center X cutting for both the Aurora II and XM9 as well as a Station Six can.
|
|
|
|
|
Posted: 7/14/2023 3:16:07 PM EDT
[Last Edit: bChau]
[#9]
Quote HistoryOriginally Posted By Outrider: I've just standardized on neoprene and center X cutting for both the Aurora II and XM9 as well as a Station Six can. What host gun do you use the Aurora II on? Been eyeing one for a G19 Gen 5 with a slide lock mod on it that we just got in at work. |
|
|
|
|
Posted: 7/14/2023 3:20:56 PM EDT
[Last Edit: HansohnBrothers]
[#10]
Quote HistoryOriginally Posted By Outrider: I've just standardized on neoprene and center X cutting for both the Aurora II and XM9 as well as a Station Six can.  
|
|
|
|
IN, USA
|
Posted: 7/20/2023 10:51:39 AM EDT
[#11]
Quote HistoryOriginally Posted By HansohnBrothers: That info is correct. On Rex's website, just click Store, don't select silencers. 5/8" x 1/8" McMaster-Carr item 5787T63 and Punch 3427a17 Thanks for this and the DA video! Somehow missed that one |
|
|
|
Posted: 11/18/2023 11:34:31 PM EDT
[#12]
Quote HistoryOriginally Posted By bChau: I'm going to do the same for my XM9 and my DA Wolfman. Punch kit I got has a punch for the center hole for the Wolfman end cap wipe. Forgot we have a Station Six at work too so will be making some wipes for that as well. What host gun do you use the Aurora II on? Been eyeing one for a G19 Gen 5 with a slide lock mod on it that we just got in at work. @Outrider @bChau What material are you using for the Station Six? 8654 |
|
|
|
TX, USA
|
Posted: 11/19/2023 11:26:17 AM EDT
[#13]
So is it necessary to make a center hole for wipe in a DA wolfman?
Was thinking of just skipping that step |
|
|
USA
|
Posted: 11/20/2023 12:09:29 PM EDT
[#14]
Quote HistoryOriginally Posted By mikego_34: So is it necessary to make a center hole for wipe in a DA wolfman? Was thinking of just skipping that step Interested as well. I cannot confirm that the SBR/neoprene on amazon is 70A - or any "A" for that mattter... |
|
|
TX, USA
|
Posted: 11/20/2023 1:34:04 PM EDT
[#15]
Quote HistoryOriginally Posted By RWEIII: Interested as well. I cannot confirm that the SBR/neoprene on amazon is 70A - or any "A" for that mattter... The one I picked up is neoprene but not sure if its 70A either…. Does that really matter? |
|
|
USA
|
Posted: 11/20/2023 4:25:47 PM EDT
[#16]
Quote HistoryOriginally Posted By mikego_34: The one I picked up is neoprene but not sure if its 70A either…. Does that really matter? Dunno, learning here. Will be buying the washers first but can see getting the strips or sheets, punches, and then cutting some down the road. Seems like something easy top do on a cold/wet day... Maybe. |
|
|
AR, USA
|
Posted: 11/20/2023 4:37:27 PM EDT
[#17]
Or try putting a piece of duct tape over the end of your can.
|
|
|
|
Posted: 11/20/2023 8:04:41 PM EDT
[#18]
Quote HistoryOriginally Posted By bChau: I'm going to do the same for my XM9 and my DA Wolfman. Punch kit I got has a punch for the center hole for the Wolfman end cap wipe. Forgot we have a Station Six at work too so will be making some wipes for that as well. What host gun do you use the Aurora II on? Been eyeing one for a G19 Gen 5 with a slide lock mod on it that we just got in at work. Paging…. @Outrider @bChau What material are you using for the Station Six? 8654 |
|
|
|
|
Posted: 11/20/2023 8:09:26 PM EDT
[#19]
Quote HistoryOriginally Posted By 8654: Paging…. @Outrider @bChau What material are you using for the Station Six? 8654 I’ve bought neoprene from McMaster. I think it’s listed at 70A. |
|
|
|
|
Posted: 11/21/2023 7:49:10 PM EDT
[#20]
Thank you.
I’m going to get some. My office has a durometer. I’ll test the OEM and the purchased. Thanks. 8654 |
|
|
|
USA
|
Posted: 3/27/2024 5:21:49 PM EDT
[#21]
What did you find as far as hardness of the OEM rubber?
|
|
|
TX, USA
|
Posted: 3/31/2024 11:31:37 AM EDT
[#22]
I have tested this.
https://www.amazon.com/dp/B00XLV9LCS?psc=1&ref=ppx_yo2ov_dt_b_product_details With 147gr it made a very noticeable pop, will try with 158gr to see if its any better. I just got in some of this. https://www.amazon.com/dp/B00KM2Y3FY?psc=1&ref=ppx_yo2ov_dt_b_product_details Its listed as 70A but I still feel the factory material is just a bit harder. Also the stuff I got is reinforced, I didn't know that at the time of purchasing. I'll test it out with 158gr and let you know. Has anyone taken a Durometer to the factory material yet? I was thinking taking it to a rubber place that's here in town to see if they have anything comparable. |
|
|
TX, USA
|
Posted: 4/1/2024 10:41:17 PM EDT
[#23]
Just got in my hole punch, took a week and half to get but Etsy was the only place I could find one that is the correct size. For 9 bucks you really can't beat it either.
It's the perfect dimensions to the factory ones. 27MM https://www.etsy.com/listing/1357518788/custom-round-steel-leather-cutting-die?click_key=b643f1ab9ddd85e7de175ef6dc0dd4566f0fecf8%3A1357518788&click_sum=b350b2f5&ref=hp_rv-1&pro=1&frs=1&variation0=3104771749 Still waiting on getting out there to test the material. Anyone found a way to make nice neat X's in them yet? When i use a flat x-acto blade they are always off a bit. Anyone try it without an X or maybe just a center punch hole? |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
