User Panel
|
Originally Posted By SWedd523: I gave you a (mostly) serious response. MALICE is going to be stronger short and long term and more secure overall. As a downside, it's difficult to attach. For my tactical use, I don't mind the difficulty of attaching because I don't move stuff around very often. If you're constantly swapping, then sure, velcro is a viable alternative. I use hard attachment pouches (CR Speed, DAA, etc) over velcro on my competition belt because, again, it's a more secure attachment method. Downside here being that they're more expensive than some KYWIs and velcro. Give and take. What works for me may not work for you and vice versa. View Quote I agree. It is give an take. I would venture to say if we traded belts, both would work for both of us if we needed them to. WTFix-it would not be great in my case. I could make it work with Mallice clips. I think we both know that MOST people are cheap. Esstac in my eyes, reaches out to a lot of people giving them great gear at a more than reasonable price. (I am going to do some research on your pouches because I would like to be educated!) I thought about TREX the other day while posting in the shit storm that is a thread in GD. Lucas now offers a pre-built belt. I absolutely think it is quality. It is still pricey. $410 vs esstac with a dump pouch and their DST($197+ your med pouch of choice). The gun community is a tough crowd. Some cheap, some have stacks. Some stupid, some smart. The worst part is just like any other subject, it is only opinions. Your hard attachments over my QD method is the exact same. I am staying within my budget(and ease), and you are using what you preform with best(or had the best results with). Ok wife has pizza and beer coming home in 10. I am done for the night, but I am going to look up your pouches! |
|
|
|
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
Originally Posted By stoner01: /media/mediaFiles/sharedAlbum/dont_believe_you_anchorman_zps267e5cbb_GIF-108.gif View Quote Yes, I too need/don't need this pouch! |
|
|
Originally Posted By USAFtacFANAC: I agree. It is give an take. I would venture to say if we traded belts, both would work for both of us if we needed them to. WTFix-it would not be great in my case. I could make it work with Mallice clips. I think we both know that MOST people are cheap. Esstac in my eyes, reaches out to a lot of people giving them great gear at a more than reasonable price. (I am going to do some research on your pouches because I would like to be educated!) I thought about TREX the other day while posting in the shit storm that is a thread in GD. Lucas now offers a pre-built belt. I absolutely think it is quality. It is still pricey. $410 vs esstac with a dump pouch and their DST($197+ your med pouch of choice). The gun community is a tough crowd. Some cheap, some have stacks. Some stupid, some smart. The worst part is just like any other subject, it is only opinions. Your hard attachments over my QD method is the exact same. I am staying within my budget(and ease), and you are using what you preform with best(or had the best results with). Ok wife has pizza and beer coming home in 10. I am done for the night, but I am going to look up your pouches! View Quote View All Quotes View All Quotes Originally Posted By USAFtacFANAC: Originally Posted By SWedd523: I gave you a (mostly) serious response. MALICE is going to be stronger short and long term and more secure overall. As a downside, it's difficult to attach. For my tactical use, I don't mind the difficulty of attaching because I don't move stuff around very often. If you're constantly swapping, then sure, velcro is a viable alternative. I use hard attachment pouches (CR Speed, DAA, etc) over velcro on my competition belt because, again, it's a more secure attachment method. Downside here being that they're more expensive than some KYWIs and velcro. Give and take. What works for me may not work for you and vice versa. I agree. It is give an take. I would venture to say if we traded belts, both would work for both of us if we needed them to. WTFix-it would not be great in my case. I could make it work with Mallice clips. I think we both know that MOST people are cheap. Esstac in my eyes, reaches out to a lot of people giving them great gear at a more than reasonable price. (I am going to do some research on your pouches because I would like to be educated!) I thought about TREX the other day while posting in the shit storm that is a thread in GD. Lucas now offers a pre-built belt. I absolutely think it is quality. It is still pricey. $410 vs esstac with a dump pouch and their DST($197+ your med pouch of choice). The gun community is a tough crowd. Some cheap, some have stacks. Some stupid, some smart. The worst part is just like any other subject, it is only opinions. Your hard attachments over my QD method is the exact same. I am staying within my budget(and ease), and you are using what you preform with best(or had the best results with). Ok wife has pizza and beer coming home in 10. I am done for the night, but I am going to look up your pouches! Not replying directly to either of you, just interjecting some useless chatter! The CR speeds and DoubleAlpha's of the pouch world are great for the gaming world and even the monstrously thick gamer belts. They do the task they are designed for perfectly but are not(most not all) great for the tactical side as they are more meant for speed on a flat range only and usually bigger and clunkier, stick out further on a belt as you're not worried about other things needed on a belt or tedious things like sitting in a vehicle or doorways. From those pouches however we(the gear makers of the world) have had great design inputs and leaps in the more military ish pouches bettering that mil/leo type of thought side. Those of us here(esstac) have had immense fun doing the gaming side with the tactical side gear and proving its not just the gear for a fast reload. And we have also learned to take some of that gaming side and get it mixed into the tactical side. Like that GD Trex thread where some learned that allot of that mil/leo side was swayed from the gamer world. My favorite is Kywi pouches mixed with a full on race holster |
|
|
Originally Posted By stoner01: /media/mediaFiles/sharedAlbum/dont_believe_you_anchorman_zps267e5cbb_GIF-108.gif View Quote View All Quotes View All Quotes Originally Posted By stoner01: Originally Posted By esstac-: I feel like going and making a dump pouch now /media/mediaFiles/sharedAlbum/dont_believe_you_anchorman_zps267e5cbb_GIF-108.gif @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. @stoner01 you don't get one |
|
|
There is no retreat but in submission and slavery!
VA, USA
|
Originally Posted By esstac-: @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. https://www.ar15.com/media/mediaFiles/72956/dump-2020950.jpg @stoner01 you don't get one View Quote View All Quotes View All Quotes Originally Posted By esstac-: Originally Posted By stoner01: Originally Posted By esstac-: I feel like going and making a dump pouch now /media/mediaFiles/sharedAlbum/dont_believe_you_anchorman_zps267e5cbb_GIF-108.gif @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. https://www.ar15.com/media/mediaFiles/72956/dump-2020950.jpg @stoner01 you don't get one RARE |
Originally Posted By beitodstr:
SOON WE WILL JUST UPLOAD OUR RECOIL TO THE CLOUD Originally Posted By iwk: Libs believe in a future that can’t exist, conservative believe in a world that never existed. |
Originally Posted By esstac-: @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. https://www.ar15.com/media/mediaFiles/72956/dump-2020950.jpg @stoner01 you don't get one View Quote I am so full of sad right now ETA. It's probably a good thing. I'm a manlet with no room on his belt, hence the Velocity one |
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
You're gonna shoot what with what?
|
|
Originally Posted By stoner01: I am so full of sad right now ETA. It's probably a good thing. I'm a manlet with no room on his belt, hence the Velocity one View Quote View All Quotes View All Quotes Originally Posted By stoner01: Originally Posted By esstac-: @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. https://www.ar15.com/media/mediaFiles/72956/dump-2020950.jpg @stoner01 you don't get one I am so full of sad right now ETA. It's probably a good thing. I'm a manlet with no room on his belt, hence the Velocity one If you can't fit a dump pouch on your belt due to lack of space, I hang a maxpedition from my belt loop below my belt and mag pouches from the SlikClip. My work belt is VERY full and hanging it from the belt loop makes things super ready. |
|
Please, call me Joe
Follow me on Instagram! http://instagram.com/tcba_joe/ |
Originally Posted By GlockLuvinRedleg: @stoner01 I got you dawg, Pick one and pm me a shipping addresshttps://www.ar15.com/media/mediaFiles/27868/20210204_003236-1923717.jpg I mean, they're folders, but since they've got a 2 inch hook n loop ilined channel between the body and rear pals row, you can skip the one wrap or clips and stick em right on the belt https://www.ar15.com/media/mediaFiles/27868/20210212_224125-2021139.jpg View Quote Kind of want. What's your business link? |
|
|
Originally Posted By GlockLuvinRedleg: @stoner01 I got you dawg, Pick one and pm me a shipping addresshttps://www.ar15.com/media/mediaFiles/27868/20210204_003236-1923717.jpg I mean, they're folders, but since they've got a 2 inch hook n loop ilined channel between the body and rear pals row, you can skip the one wrap or clips and stick em right on the belt https://www.ar15.com/media/mediaFiles/27868/20210212_224125-2021139.jpg View Quote Those are awesome |
|
"If you cant do something smart, do something right"
|
Originally Posted By GlockLuvinRedleg: @stoner01 I got you dawg, Pick one and pm me a shipping addresshttps://www.ar15.com/media/mediaFiles/27868/20210204_003236-1923717.jpg I mean, they're folders, but since they've got a 2 inch hook n loop ilined channel between the body and rear pals row, you can skip the one wrap or clips and stick em right on the belt https://www.ar15.com/media/mediaFiles/27868/20210212_224125-2021139.jpg View Quote I'll take the Gods Plaid. PM inbound |
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
Originally Posted By TCBA_Joe: If you can't fit a dump pouch on your belt due to lack of space, I hang a maxpedition from my belt loop below my belt and mag pouches from the SlikClip. My work belt is VERY full and hanging it from the belt loop makes things super ready. View Quote Look up to my belt, i fit one on there |
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
Originally Posted By TCBA_Joe: That velcro setup is how Eagle does it. There's technical reasons for it not just comfort. Putting hook on the inner belt spreads the hooks open allowing it to grab the loop of the outer belt better. If it was reversed, the hooks would collapse and hold less secure. Loop on the outer belt reduces abrasion to dry suits and CBRNE suits compared to hook. From a design standpoint its better. Just sucks when you're not wearing the outer belt. View Quote View All Quotes View All Quotes Originally Posted By TCBA_Joe: Originally Posted By PFran42: GBRS Group is made up of former DEVGRU operators. That's "worth" at least $50 right off the bat. The way they differentiate (somewhat - Eagle does the same thing) is to put the hook side of the Velcro facing outwards on the inner belt. Reasoning is that it is less irritating should you not don the outer belt perfectly and have a multi-hour infil where you are sardined into a UH-60. The other "value add" is that it is sold as a 3 piece system. Inner belt, inner belt cover and outer belt. GBRS video on the belt in question: https://www.youtube.com/watch?v=WZGafeKDaNI Side note: Some of the GBRS ex-DEVGRU guys are running Esstac KIWYs. Way to go @esstac- @RyanEsstac! That velcro setup is how Eagle does it. There's technical reasons for it not just comfort. Putting hook on the inner belt spreads the hooks open allowing it to grab the loop of the outer belt better. If it was reversed, the hooks would collapse and hold less secure. Loop on the outer belt reduces abrasion to dry suits and CBRNE suits compared to hook. From a design standpoint its better. Just sucks when you're not wearing the outer belt. Volund did that as well, at least on the belt I have from them. |
|
|
Originally Posted By esstac-: @USAFtacFANAC <---did I do that right? PM me your shipping info and preferred color and Ill send you one I started this right after saying that but got rudely interrupted by customers coming in the store front and Danny left early...... they were all like "take my money" It was a fun test. For years I just made shit from the voices in my head but this past year I have learned how to design things on the PC and doing some random things like this are good for learning new ways. Just a basic one piece dumper, doesn't fold-up as I don't like folding. https://www.ar15.com/media/mediaFiles/72956/dump-2020950.jpg @stoner01 you don't get one View Quote Awww fuck yes. PM inbound. |
|
|
Originally Posted By GlockLuvinRedleg: @stoner01 I got you dawg, Pick one and pm me a shipping addresshttps://www.ar15.com/media/mediaFiles/27868/20210204_003236-1923717.jpg I mean, they're folders, but since they've got a 2 inch hook n loop ilined channel between the body and rear pals row, you can skip the one wrap or clips and stick em right on the belt https://www.ar15.com/media/mediaFiles/27868/20210212_224125-2021139.jpg View Quote I was looking at your belt, I am digging the navy fatigue camo. Those are pretty sharp man, and awesome for hooking stoner up. |
|
|
Originally Posted By USAFtacFANAC: I was looking at your belt, I am digging the navy fatigue camo. Those are pretty sharp man, and awesome for hooking stoner up. View Quote He offered to help me me out with something a year or so ago, I found an alternate solution but that doesn't change the gesture. |
|
You're gonna shoot what with what?
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
AXL Eclipse belts are still in stock. I ordered mine yesterday.
|
|
|
For post 5000, instead of starting a ghey thread in GD... I present you a lot of Esstac. Including the dump pouch that I was sent (grey) folded up. Stand by for some comparison pics of theirs and TREX's. It cost me 25 bucks for a membership so I could post pics easier! Attached File
Top is the wife's. Middle is my 'battle belt'. The Grey is for my two jobs. One is a gun store, and the other is a orange home improvement store. Here is some comparison pics, and I will comment on both below the pictures. Attached File Attached File Attached File Attached File Simplifying the posts for differences(and esstac schooling me): -Material- The Esstac is much more stiff and feels better. They call it Brookwood squadron laminate which is 1000D and 500D cordura put together. Compared to the TREX this seems much more rugged. (The esstac may be simple but it is by no means a "cheap" pouch, had to do my homework) -The mounting velcro- Esstac is using a laser cut piece of One Wrap (which I prefer) as opposed to TREX which has a thicker piece of conventional velcro. The ESSTAC fits great on their belts. The TREX is more of a univeral mount (maybe better for the 2 inch belt guys). -The opening- Esstac is a wide mouth opening. Much larger than the TREX. The TREX has a sewn flap that covers the opening. Think ESSTAC much better for admin and TREX probably has the edge for running. -Belt real-estate- They are almost similar with the Esstac using about 1/2 and inch or so more real-estate. When folded up, the Esstac does not bulge as much while sitting in a chair with a back. You can fold it wide as I did, or check out their site to see how to make it shorter while stowed. Which one do I recommend(in this first glance)? Both. They both are different and can suit anyone's needs. The only difference is the top with one being open, and the other being partially closed. I like both of them and will run them more when I can. I imagine the Esstac one will be cheaper to produce(I am wrong, esstac comments on the brookwood squadron material, and it is One Wrap. Still easily worth it for something with a wide mouth and tough material). But I spend a decent amount of money at both companies because at the end of the day, they treat us right and support the 2A more than I do, so to me... it's money well spent. Not to mention both dump pouches hold the most important part of my range days: A can of Grizz wintergreen Thanks again @esstac- for being bad ass dudes and making me feel like I am more than a customer. Tell Dan thanks a ton as well. That guy is great for keeping it real. I feel like he was more of a bro rather than a car salesman when it came to my orders. |
|
Just buy it. You know you want to.
|
Originally Posted By USAFtacFANAC: For post 5000, instead of starting a ghey thread in GD... I present you a lot of Esstac. Including the dump pouch that I was sent (grey) folded up. Stand by for some comparison pics of theirs and TREX's. It cost me 25 bucks for a membership so I could post pics easier!https://www.ar15.com/media/mediaFiles/323787/belts_JPG-2023807.JPG Top is the wife's. Middle is my 'battle belt'. The Grey is for my two jobs. One is a gun store, and the other is a orange home improvement store. Here is some comparison pics, and I will comment on both below the pictures. https://www.ar15.com/media/mediaFiles/323787/belt1_JPG-2023821.JPG https://www.ar15.com/media/mediaFiles/323787/belt2_JPG-2023822.JPG https://www.ar15.com/media/mediaFiles/323787/belt3_JPG-2023823.JPG https://www.ar15.com/media/mediaFiles/323787/belt4_JPG-2023824.JPG View Quote I think the Grey belts and accessories look awesome. I don't have a use for Grey, but I think it's just slick and looks clean. |
|
"When I pass away, I hope my wife sells my stuff for what it's worth, and not what I told her I paid for it !!"
|
Originally Posted By acegunner: I think the Grey belts and accessories look awesome. I don't have a use for Grey, but I think it's just slick and looks clean. View Quote I agree. Sometimes I rock the multicam at the gun shop job just to feel like a tier 1 operator, but the grey looks much more professional. I have a hunch if I wore the multicam and the home improvement store, it would get me some unwanted attention. I have 2 Daeodon's in MC... but I think I see a grey one with L210's in my future that will stay in the car. I am a multicam slut, but it does make you stick out like a sore thumb. |
|
Just buy it. You know you want to.
|
Originally Posted By USAFtacFANAC: For post 5000, instead of starting a ghey thread in GD... I present you a lot of Esstac. Including the dump pouch that I was sent (grey) folded up. Stand by for some comparison pics of theirs and TREX's. It cost me 25 bucks for a membership so I could post pics easier!https://www.ar15.com/media/mediaFiles/323787/belts_JPG-2023807.JPG Top is the wife's. Middle is my 'battle belt'. The Grey is for my two jobs. One is a gun store, and the other is a orange home improvement store. Here is some comparison pics, and I will comment on both below the pictures. https://www.ar15.com/media/mediaFiles/323787/belt1_JPG-2023821.JPG https://www.ar15.com/media/mediaFiles/323787/belt2_JPG-2023822.JPG https://www.ar15.com/media/mediaFiles/323787/belt3_JPG-2023823.JPG https://www.ar15.com/media/mediaFiles/323787/belt4_JPG-2023824.JPG There is quite a bit of differences. The 2 in particular that I like is the open top vs the flap on the TREX, and the mounting system. I know I will like the open top for more admin purposes like throwing a water bottle in or my palm pilot thing for the jobs mentioned above. I do think the TREX would capture items better if you are running of course. I like the mounting system on the Esstac much better. The TREX seems like it was build as more of a universal solution. There is nothing wrong with it, but after some sitting and standing the Velcro on the TREX will start to rub your skin or shirt because of how big and abrasive the hook side is. The other differences worth mentioning: The material. The Esstac is much thicc'r material. I only see this as a positive. If I had to guess they are both made of codura(spelling?). The Trex is significantly thinner, you can see from the wrinkles in the above pic. I keep it stored mostly in my gun shop gig. Another difference is the profile when folded up. @stoner01 being a smaller individual would have to make up some real estate on the belt somehow to fit the Esstac. A fatty like myself has plenty of room. When folded up, the Esstac is quite less bulky. In a normal chair, the Esstac is much more comfortable because of the low profile. The Trex is not bad, but you can tell it is there. It's nit picking but I felt it was worth noting. The last difference is the Velcro used. Trex uses a more conventional style that is tall hooks vs Esstac using more of a one wrap style. I prefer the One Wrap because of the low profile it offers. Which one do I recommend(in this first glance)? Both. They both are different and can suit anyone's needs. The only difference is the top with one being open, and the other being partially closed. I like both of them and will run them more when I can. I imagine the Esstac one will be cheaper to produce(me strictly guessing). But I spend a decent amount of money at both companies because at the end of the day, they treat us right and support the 2A more than I do, so to me... it's money well spent. Not to mention both dump pouches hold the most important part of my range days: A can of Grizz wintergreen Thanks again @esstac- for being bad ass dudes and making me feel like I am more than a customer. Tell Dan thanks a ton as well. That guy is great for keeping it real. I feel like he was more of a bro rather than a car salesman when it came to my orders. View Quote If you fold/pleat the sides in you will have a smaller footprint when rolled up. Also it's Brookwood Squadron Laminate. A layer of 1000D and 500d cordura so much stiffer than traditional dumpers. |
|
|
Originally Posted By esstac-: If you fold/pleat the sides in you will have a smaller footprint when rolled up. Also it's Brookwood Squadron Laminate. A layer of 1000D and 500d cordura so much stiffer than traditional dumpers. View Quote It's on your website now. Excellent. I will mess with it again in a bit. Just ate a fuck ton of boneless wings... I see a nap in my very near future. The material is super stiff, which to me would make more sense for admin purposes. ETA: I also see how you roll it up to be smaller now. Stoner and small waist approved! |
|
Just buy it. You know you want to.
|
Indeed
|
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
Originally Posted By GlockLuvinRedleg: @stoner01 Otd tonight or tommorow morning Would been quicker but my machine let me know it was a "few" hours over due for maintenance. And than my assistant (Satan's favorite cat) decided he needed to help. https://www.ar15.com/media/mediaFiles/27868/20210721_225841-2024092.jpg Assuming your belt isn't over 2.5 inches wide it'll fit the channel. https://www.ar15.com/media/mediaFiles/27868/20210722_174116-2024125.jpg View Quote Thats awesome. Question. Do you wrap your holsters yourself? What adhesive and material do you use? I would like to find something to wrap my multicam and multicam black in. |
|
Just buy it. You know you want to.
|
Originally Posted By GlockLuvinRedleg: Yes And it depends on the holster and material. I use alot of marine adhesive . I try to lean towards 330 to 500d cordura, simply because it is more resistant to abrasion rot and water damage, but its simply not feasible for some patterns. I did this one for an arfmilbro friend, and at the time the only available fabric was poly/cotton. So in an attempt to "ruggedize" it it got a couple different treatments followed by a tech fabric dip after it was on the holster and set. https://www.ar15.com/media/mediaFiles/27868/IMG_20210502_090150_901-2024138.jpg I wasn't super happy with it, but it seems to be holding up. View Quote Any particular brand of marine adhesive? A quick google search pulled up 3M, flex seal(lol), and a lot of epoxy type kits. I still think the cotton looks good. I would think a pattern like multicam shouldn't be too hard to get off Amazon/somewhere. This will be a project in the winter time for sure. I may even cover my sp-01 holster in that US Navy camo you used... I have a couple buddies with old uniforms ha. |
|
Just buy it. You know you want to.
|
Originally Posted By GlockLuvinRedleg: Yes And it depends on the holster and material. I use alot of marine adhesive . I try to lean towards 330 to 500d cordura, simply because it is more resistant to abrasion rot and water damage, but its simply not feasible for some patterns. I did this one for an arfmilbro friend, and at the time the only available fabric was poly/cotton. So in an attempt to "ruggedize" it it got a couple different treatments followed by a tech fabric dip after it was on the holster and set. https://www.ar15.com/media/mediaFiles/27868/IMG_20210502_090150_901-2024138.jpg I wasn't super happy with it, but it seems to be holding up. View Quote Dude, you do some cool stuff! Envious of your sewing ability! ( I don’t believe I ever said that before! ) |
|
|
Originally Posted By GlockLuvinRedleg: @stoner01 Otd tonight or tommorow morning Would been quicker but my machine let me know it was a "few" hours over due for maintenance. And than my assistant (Satan's favorite cat) decided he needed to help. https://www.ar15.com/media/mediaFiles/27868/20210721_225841-2024092.jpg Assuming your belt isn't over 2.5 inches wide it'll fit the channel. https://www.ar15.com/media/mediaFiles/27868/20210722_174116-2024125.jpg View Quote No worries brother, it is appreciated greatly. It will fit both my belt and my chest rig just fine. Need to decide where it's going. And I may have to see about getting a holster wrapped. |
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesesteaks" SSgt Jason A Decker. 11/6/09 |
Originally Posted By Henny: Dude, you do some cool stuff! Envious of your sewing ability! ( I don’t believe I ever said that before! ) View Quote I'm over here laughing. If you had told me about this 6 years ago sitting in my platoon office I would have laughed at you. I've always had ideas/improvement thoughts for stuff and I finally got tired of saying "why doesn't someone do xxxxxx" Well that and i kinda got sidetracked from dealing with estate liquidators and the military surplus game. I'm pretty critical of the stuff I make, and wish I could do better, but some of the things that got me med retired 2 years short of actual retirement make some of this stuff a challenge. But overall I really enjoy it, my friends seem to love it, and it gives me.something do when its not duck season |
|
You're gonna shoot what with what?
|
There is no retreat but in submission and slavery!
VA, USA
|
Originally Posted By USAFtacFANAC: It's on your website now. Excellent. I will mess with it again in a bit. Just ate a fuck ton of boneless wings... I see a nap in my very near future. The material is super stiff, which to me would make more sense for admin purposes. ETA: I also see how you roll it up to be smaller now. Stoner and small waist approved! View Quote Ordered |
Originally Posted By beitodstr:
SOON WE WILL JUST UPLOAD OUR RECOIL TO THE CLOUD Originally Posted By iwk: Libs believe in a future that can’t exist, conservative believe in a world that never existed. |
@esstac-
Belt received, thank you! A lot of thought was put into it's design, and the effort shows. Question though, what are the two plastic separate belt loops are for? |
|
|
Originally Posted By GlockLuvinRedleg: I'm over here laughing. If you had told me about this 6 years ago sitting in my platoon office I would have laughed at you. I've always had ideas/improvement thoughts for stuff and I finally got tired of saying "why doesn't someone do xxxxxx" Well that and i kinda got sidetracked from dealing with estate liquidators and the military surplus game. I'm pretty critical of the stuff I make, and wish I could do better, but some of the things that got me med retired 2 years short of actual retirement make some of this stuff a challenge. But overall I really enjoy it, my friends seem to love it, and it gives me.something do when its not duck season View Quote View All Quotes View All Quotes Originally Posted By GlockLuvinRedleg: Originally Posted By Henny: Dude, you do some cool stuff! Envious of your sewing ability! ( I don’t believe I ever said that before! ) I'm over here laughing. If you had told me about this 6 years ago sitting in my platoon office I would have laughed at you. I've always had ideas/improvement thoughts for stuff and I finally got tired of saying "why doesn't someone do xxxxxx" Well that and i kinda got sidetracked from dealing with estate liquidators and the military surplus game. I'm pretty critical of the stuff I make, and wish I could do better, but some of the things that got me med retired 2 years short of actual retirement make some of this stuff a challenge. But overall I really enjoy it, my friends seem to love it, and it gives me.something do when its not duck season That’s pretty much how I got into holster making, “…why doesn’t someone….” Or “…I wish this holster was more like this…” |
|
|
Originally Posted By Henny: That’s pretty much how I got into holster making, “…why doesn’t someone….” Or “…I wish this holster was more like this…” View Quote I've dabbled slightly, with leather mostly. My machine will sew leather to kydex (multiple layers) but I just don't have the drive to get all of the rest of the stuff to make a halfway decent go at it. I did make a "firepower" shoulder rig for my shockwave/a5 whippet, and glock, but that was more of a "i bet I can do that" than anything else |
|
You're gonna shoot what with what?
|
Originally Posted By Jonny1904: @esstac- Belt received, thank you! A lot of thought was put into it's dlesign, and the effort shows. Question though, what are the two plastic separate belt loops are for? View Quote No idea what youre talking about! Maybe the girls tossed in some free belt loops? |
|
|
Originally Posted By USAFtacFANAC: For post 5000, instead of starting a ghey thread in GD... I present you a lot of Esstac. Including the dump pouch that I was sent (grey) folded up. Stand by for some comparison pics of theirs and TREX's. It cost me 25 bucks for a membership so I could post pics easier!https://www.ar15.com/media/mediaFiles/323787/belts_JPG-2023807.JPG Top is the wife's. Middle is my 'battle belt'. The Grey is for my two jobs. One is a gun store, and the other is a orange home improvement store. Here is some comparison pics, and I will comment on both below the pictures. https://www.ar15.com/media/mediaFiles/323787/belt1_JPG-2023821.JPG https://www.ar15.com/media/mediaFiles/323787/belt2_JPG-2023822.JPG https://www.ar15.com/media/mediaFiles/323787/belt3_JPG-2023823.JPG https://www.ar15.com/media/mediaFiles/323787/belt4_JPG-2023824.JPG There is quite a bit of differences. The 2 in particular that I like is the open top vs the flap on the TREX, and the mounting system. I know I will like the open top for more admin purposes like throwing a water bottle in or my palm pilot thing for the jobs mentioned above. I do think the TREX would capture items better if you are running of course. I like the mounting system on the Esstac much better. The TREX seems like it was build as more of a universal solution. There is nothing wrong with it, but after some sitting and standing the Velcro on the TREX will start to rub your skin or shirt because of how big and abrasive the hook side is. The other differences worth mentioning: The material. The Esstac is much thicc'r material. I only see this as a positive. If I had to guess they are both made of codura(spelling?). The Trex is significantly thinner, you can see from the wrinkles in the above pic. I keep it stored mostly in my gun shop gig. Another difference is the profile when folded up. @stoner01 being a smaller individual would have to make up some real estate on the belt somehow to fit the Esstac. A fatty like myself has plenty of room. When folded up, the Esstac is quite less bulky. In a normal chair, the Esstac is much more comfortable because of the low profile. The Trex is not bad, but you can tell it is there. It's nit picking but I felt it was worth noting. The last difference is the Velcro used. Trex uses a more conventional style that is tall hooks vs Esstac using more of a one wrap style. I prefer the One Wrap because of the low profile it offers. Which one do I recommend(in this first glance)? Both. They both are different and can suit anyone's needs. The only difference is the top with one being open, and the other being partially closed. I like both of them and will run them more when I can. I imagine the Esstac one will be cheaper to produce(I am wrong, esstac comments on the brookwood squadron material, and it is One Wrap. Still easily worth it for something with a wide mouth and tough material). But I spend a decent amount of money at both companies because at the end of the day, they treat us right and support the 2A more than I do, so to me... it's money well spent. Not to mention both dump pouches hold the most important part of my range days: A can of Grizz wintergreen Thanks again @esstac- for being bad ass dudes and making me feel like I am more than a customer. Tell Dan thanks a ton as well. That guy is great for keeping it real. I feel like he was more of a bro rather than a car salesman when it came to my orders. View Quote Attached File I like esstac. I run Kywi exclusively. Sold my Haley micro cause the pouches suck compared to kywi's But just damn. That's impressive. |
|
callmenoshie: "saying that females have the potential to be "bat shit crazy" is like saying the sky has the potential to be blue."
XCRmonger: "I've seen German Shit Porn that was sexier." |
Originally Posted By GlockLuvinRedleg: I did make a "firepower" shoulder rig for my shockwave/a5 whippet, and glock, but that was more of a "i bet I can do that" than anything else View Quote View All Quotes View All Quotes Originally Posted By GlockLuvinRedleg: Originally Posted By Henny: That’s pretty much how I got into holster making, “…why doesn’t someone….” Or “…I wish this holster was more like this…” I did make a "firepower" shoulder rig for my shockwave/a5 whippet, and glock, but that was more of a "i bet I can do that" than anything else "Would you like to know more?" [. ]No Yes |
|
"If you cant do something smart, do something right"
|
Originally Posted By GlockLuvinRedleg: Shotgun side before I worked out a lanyard, It's rough, but I literally got tired of sweating working on the boat and came in to putz around in the basement. Probably 45 minutes in it if that https://www.ar15.com/media/mediaFiles/27868/20200717_193945-2024395.jpg Humpback sits higher so it has to go lower https://www.ar15.com/media/mediaFiles/27868/20200717_205843-2024591.jpghttps://www.ar15.com/media/mediaFiles/27868/20200717_193953-2024592.jpg View Quote Nice |
|
"If you cant do something smart, do something right"
|
Just buy it. You know you want to.
|
Originally Posted By slappomatt: holy shit! you say make me this, they say no, and 2 fucking days later on the other side of the country here you are posting the thing they said they wouldnt make you. /media/mediaFiles/sharedAlbum/landing-page-double-take-354.gif I like esstac. I run Kywi exclusively. Sold my Haley micro cause the pouches suck compared to kywi's But just damn. That's impressive. View Quote Sir, I am not special. I have been asking for one for a while now. Honestly it was luck that they hooked me up. They have been more than generous with me. I try not to be brand loyal. (I own glocks and CZ, AR from BCM, Anderson, Geiselle, you get the idea) Esstac makes great products. I am choosing to be brand loyal with them for a couple 'simple' reasons: 1. They make shit that is simple and works. I mean it. Many are buying into over priced stuff(not a knock on those guys) but for the price of say the GBRS belt, you can get an Esstac belt, 2 pistol Kywi's, 2 AR kywis and a kydex holster for the price of the GBRS belt. They are not selling themselves into the hype beast game unless they do a collab with special print on something. 2. They are active in the community. They do this with a customer service model that is: You give us money, you get a product and we will be best friends. They are super active on here. They call bullshit when they see it, which may play into the simplicity of their products. 3. The white Kywi sticker of the little guy hold a M4 is the best sticker ever made. Yes a sticker makes the list. Why not? At the end of the day I am a fan boi and they know it. I like Geiselle products and BCM rifles the most but they have no idea who I am. Esstac has EARNED my loyalty in my eyes. Not to mention me spending a fuck ton of money (fuck ton to me at least) and they make us peons feel just as important as govt contracts or bulk order sales. This same concept is also followed by ECCO machine who does all of my form 1 recores. Companies like this should be thriving, so I will be a walking billboard for both of them. And to answer your question: Yes, they ship fast as fuck. I am not special, just was at the right place at the right time! |
|
Just buy it. You know you want to.
|
Originally Posted By GlockLuvinRedleg: Shotgun side before I worked out a lanyard, It's rough, but I literally got tired of sweating working on the boat and came in to putz around in the basement. Probably 45 minutes in it if that https://www.ar15.com/media/mediaFiles/27868/20200717_193945-2024395.jpg Humpback sits higher so it has to go lower https://www.ar15.com/media/mediaFiles/27868/20200717_205843-2024591.jpghttps://www.ar15.com/media/mediaFiles/27868/20200717_193953-2024592.jpg View Quote THAT IS FUCKING AWESOME. You and chase45 should collab for a shockwave on one side and an MP5 on the other. Are you self taught in making all of these things you have posted? |
|
Just buy it. You know you want to.
|
Originally Posted By jcast141: I’ll second this I’ve tried several other med pouches and the STOMP is next on my list as it seems to fill all my needs. It has been out of stock in black for a while, now just waiting on a sale lol View Quote @jcast141 not on sale but in stock. STOMP in stock |
|
Luke 2:14
|
Not a lineman
|
Originally Posted By Will816: Getting my wife's belt set up for her. Hopefully we'll run it tomorrow and she'll have a chance to re-arrange as suits her; for now it more or less mirrors mine. https://live.staticflickr.com/65535/51333044611_1c77eb8304_b.jpgUntitled by Will5B, on Flickr https://live.staticflickr.com/65535/51333257608_57ab52a1b9_b.jpgUntitled by Will5B, on Flickr View Quote Very nice. |
|
Than there came from hunting, the weather-eyed shooter.
ARFCOM Callsign: Varmint |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.