User Panel
Originally Posted By Engineer5:
The gangs all here! Finally completed my Mk12 trio. I haven't had it out yet but I think the H is going to be my favorite. I don't even want to know how much money is in this picture. http://img.photobucket.com/albums/v456/Engineer23/019_zpssnv1zb6n.jpg View Quote Seriously, those look great! Congrats bud! Top page clone club, 2 of the family of 4 currently. And yes larue bipod mount, bucause im tired of dicking around with a screwdriver in my case for the kac mount ill get some good action shots outside someday soon. |
|
|
Originally Posted By 78Staff:
Yeah LT104 makes it so much easier to get good ER, especially with the shorter A1 stock - I ran one for a while while sourcing some no-humps, and they work grat on this platform, and yes ITW approved :). But the 22's just look like they belong on these builds, so once I found a set without levers I went ahead and switched over. Before no-humps :) https://www.AR15.Com/media/mediaFiles/385949/IOActMz4-97239.jpg Hell, I had a 3.5-10 on there for a while too now that I think about it... Here is earlier version, with humps. http://i.imgur.com/z6LoOzy.jpg View Quote View All Quotes View All Quotes Originally Posted By 78Staff:
Originally Posted By lancecriminal86:
Early SPR, LaRue mount, non illum 3.5-10, SOPMOD stock so maybe M4A1 lower or stock swap. It's all out there, no point being clone police anymore. http://www.isayeret.com/content/introduction/training/images/yahalom-2.jpg Before no-humps :) https://www.AR15.Com/media/mediaFiles/385949/IOActMz4-97239.jpg Hell, I had a 3.5-10 on there for a while too now that I think about it... Here is earlier version, with humps. http://i.imgur.com/z6LoOzy.jpg |
|
|
Originally Posted By Davey_Sickboy:
Lol yea. Didn't wanna brag or anything, but Sierra loved my photo and sent me a little care package to say thank you for letting them use it on their FB and IG page. View Quote |
|
WTB:
- A.R.M.S. #22H Non lever stops for my Mk12 - Doctersight III - AN/PEQ 2 |
Originally Posted By HARMS4X:
Those look sweet ?? View Quote View All Quotes View All Quotes Originally Posted By HARMS4X:
Originally Posted By 78Staff:
Yeah LT104 makes it so much easier to get good ER, especially with the shorter A1 stock - I ran one for a while while sourcing some no-humps, and they work grat on this platform, and yes ITW approved :). But the 22's just look like they belong on these builds, so once I found a set without levers I went ahead and switched over. Before no-humps :) https://www.AR15.Com/media/mediaFiles/385949/IOActMz4-97239.jpg Hell, I had a 3.5-10 on there for a while too now that I think about it... Here is earlier version, with humps. http://i.imgur.com/z6LoOzy.jpg |
|
---
NRA Life Member USN Retired |
Originally Posted By 78Staff:
Yeah LT104 makes it so much easier to get good ER, especially with the shorter A1 stock - I ran one for a while while sourcing some no-humps, and they work grat on this platform, and yes ITW approved :). But the 22's just look like they belong on these builds, so once I found a set without levers I went ahead and switched over. Before no-humps :) https://www.AR15.Com/media/mediaFiles/385949/IOActMz4-97239.jpg Hell, I had a 3.5-10 on there for a while too now that I think about it... Here is earlier version, with humps. http://i.imgur.com/z6LoOzy.jpg View Quote View All Quotes View All Quotes Originally Posted By 78Staff:
Originally Posted By lancecriminal86:
Early SPR, LaRue mount, non illum 3.5-10, SOPMOD stock so maybe M4A1 lower or stock swap. It's all out there, no point being clone police anymore. http://www.isayeret.com/content/introduction/training/images/yahalom-2.jpg Before no-humps :) https://www.AR15.Com/media/mediaFiles/385949/IOActMz4-97239.jpg Hell, I had a 3.5-10 on there for a while too now that I think about it... Here is earlier version, with humps. http://i.imgur.com/z6LoOzy.jpg both configurations are super-fresh. This came today. Compass Lake, Douglas SPR 416 SS, CLE Match chamber. CLE was awesome to deal with. The craftsmanship that went into the barrel is evident, and looks simply amazing. I can't wait to see what it can do. The "Parker Gray" DuraCoat finish, was applied very consistent and even, and is actually a whole lot darker than in the pics(too much lighting). It actually, very much resembles old school Colt gray anodizing: |
|
Cage Codes:13269/1S002/3J629/0BJZ8/3S679
"What's wrong with you, Abu Hajaar?" |
Originally Posted By Zakk101abn:
Shitty phone pic https://www.AR15.Com/media/mediaFiles/367025/IMG-9490-176228.JPG View Quote |
|
Uncle
Sam's Misguided Children |
[quote]Originally Posted By Movistar:
Shooting unsuppressed is for the birds and criminals[/quote] |
@Dobs013- braceman got back to me overnight. He already has a fsgb to try it on. I offered to have one shipped from PRI to him to see what happens. A sacrificial fsgb so to speak but he said he has one to try it on that he will see how it goes and get a cost for us. I told him I'm sure there would be a few people wanting these done. I will get 2-3 myself. I've had zero luck finding one. Even the reproduction unit other than buying it new.
|
|
WTB:
URX II for SR-25(7.62) carbine length. A.R.M.S #36 swan sleeve-PEQ-2 or MOD with no notches for gen 3 PRI tube |
Dean Winchester wishes he was this cool
MD, USA
|
Originally Posted By IronBalaclava:
This came today. Compass Lake, Douglas SPR 416 SS, CLE Match chamber. CLE was awesome to deal with. The craftsmanship that went into the barrel is evident, and looks simply amazing. I can't wait to see what it can do. The "Parker Gray" DuraCoat finish, was applied very consistent and even, and is actually a whole lot darker than in the pics(too much lighting). It actually, very much resembles old school Colt gray anodizing: http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04550_zpsxji951lb.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04552_zpsx5gchjqw.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04555_zpsfhlqiqci.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04559_zpsfkplqhaw.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04560_zpswwh9szq3.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04563_zpsaciznojb.jpg View Quote |
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
Originally Posted By Samson-Dogg:
@Dobs013- braceman got back to me overnight. He already has a fsgb to try it on. I offered to have one shipped from PRI to him to see what happens. A sacrificial fsgb so to speak but he said he has one to try it on that he will see how it goes and get a cost for us. I told him I'm sure there would be a few people wanting these done. I will get 2-3 myself. I've had zero luck finding one. Even the reproduction unit other than buying it new. View Quote |
|
|
Originally Posted By Samson-Dogg:
@Dobs013- braceman got back to me overnight. He already has a fsgb to try it on. I offered to have one shipped from PRI to him to see what happens. A sacrificial fsgb so to speak but he said he has one to try it on that he will see how it goes and get a cost for us. I told him I'm sure there would be a few people wanting these done. I will get 2-3 myself. I've had zero luck finding one. Even the reproduction unit other than buying it new. View Quote |
|
|
Originally Posted By KILLERB6:
That is one of the advantages of the nitride process: the barrels stay dimensionally accurate (far more so than the CL process). View Quote |
|
|
Originally Posted By Engineer5:
The gangs all here! Finally completed my Mk12 trio. I haven't had it out yet but I think the H is going to be my favorite. I don't even want to know how much money is in this picture. http://img.photobucket.com/albums/v456/Engineer23/019_zpssnv1zb6n.jpg View Quote |
|
|
|
Originally Posted By aaron580:
Whoa wait, what are you 2 trying to do? I must have missed it somewhere. Early set screw fsb? View Quote View All Quotes View All Quotes Originally Posted By aaron580:
Originally Posted By Samson-Dogg:
@Dobs013- braceman got back to me overnight. He already has a fsgb to try it on. I offered to have one shipped from PRI to him to see what happens. A sacrificial fsgb so to speak but he said he has one to try it on that he will see how it goes and get a cost for us. I told him I'm sure there would be a few people wanting these done. I will get 2-3 myself. I've had zero luck finding one. Even the reproduction unit other than buying it new. |
|
|
|
Dean Winchester wishes he was this cool
MD, USA
|
|
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
Originally Posted By Dobs013:
No we are trying to replicate the correct set screw fsb for a late mod 0 with the gen 3 tube. Essentially we are just going to have the "PRI USA" engraving milled off and have the proper earlier engravings added by braceman with the full address. Aside from the engraving the set screw fsb's sold now are identical to the ones for a late mod 0. If you're gonna do it might as well go all out View Quote |
|
|
anybody know a place (preferably around SWPA) that's got the AEM5 in stock? I'd rather not have to buy it somewhere else and add months to an already idiotic wait.
If not how bout a place in general that has them? ADCO is sold out. |
|
Hi, I'm Brad. Sadly that name was already taken
|
Originally Posted By aaron580:
Id be in for that, im holding off my late mod 0 for a 10% sale at pri, and fully plan on a set screw fsb, just cant get over the crossbolt. I wondrr how much metal it will remove in doing so, is the logo deep? View Quote View All Quotes View All Quotes Originally Posted By aaron580:
Originally Posted By Dobs013:
No we are trying to replicate the correct set screw fsb for a late mod 0 with the gen 3 tube. Essentially we are just going to have the "PRI USA" engraving milled off and have the proper earlier engravings added by braceman with the full address. Aside from the engraving the set screw fsb's sold now are identical to the ones for a late mod 0. If you're gonna do it might as well go all out |
|
|
Originally Posted By Snaps:
anybody know a place (preferably around SWPA) that's got the AEM5 in stock? I'd rather not have to buy it somewhere else and add months to an already idiotic wait. If not how bout a place in general that has them? ADCO is sold out. View Quote |
|
|
Originally Posted By ArmedFerret:
I'd post a meme of Farva saying "I'm not even going to dignify myself with a response to that" but memes aren't allowed so....I guess just imagine it. View Quote I do have an on topic question. Which doesn't have much to do with anything other than I've been buying a few magpul things lately. For some reason I can't for the life of me remember seeing a magpul stock on a Mk12 Mod1 or Mod 0. Seems like fixed and SOPMODs are the majority. And then the CAR stock on some Mod 0's. But now I'm thinking, maybe it's time to go back through the thread. Yikes. LOL. Maybe somebody can fill me in. I know we got the Hollands with Anyways.... ACS, CTR, STR on a Mk12??? Seems like I don't recall seeing that. Other than that pic with the UBR, couple pages back. Guy prone. |
|
|
Originally Posted By Dobs013:
It shouldn't remove very much. The engraving isn't that deep. The only thing I am not 100% on is what the inside of the tower looks like. As long as there isn't a huge cavity in there we should be good. View Quote |
|
|
Originally Posted By aaron580:
What about those early towers from the fb page? Were they hollow or do we know? Cant imagine the late 0 has much inside, probably pretty thick by the one i felt and had for a week, and not having the wheel makes a difference as well View Quote View All Quotes View All Quotes Originally Posted By aaron580:
Originally Posted By Dobs013:
It shouldn't remove very much. The engraving isn't that deep. The only thing I am not 100% on is what the inside of the tower looks like. As long as there isn't a huge cavity in there we should be good. |
|
|
Originally Posted By ArmedFerret:
That's not all that came. View Quote View All Quotes View All Quotes Originally Posted By ArmedFerret:
Originally Posted By IronBalaclava:
This came today. Compass Lake, Douglas SPR 416 SS, CLE Match chamber. CLE was awesome to deal with. The craftsmanship that went into the barrel is evident, and looks simply amazing. I can't wait to see what it can do. The "Parker Gray" DuraCoat finish, was applied very consistent and even, and is actually a whole lot darker than in the pics(too much lighting). It actually, very much resembles old school Colt gray anodizing: http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04550_zpsxji951lb.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04552_zpsx5gchjqw.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04555_zpsfhlqiqci.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04559_zpsfkplqhaw.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04560_zpswwh9szq3.jpg http://img.photobucket.com/albums/v454/IronBalaclava/MK12%20Mod%201%20SPR/DSC04563_zpsaciznojb.jpg Rifle's done, Just leveled My Mark 4 MR/T and r super stoked. Just gotta' wait tilll the weather clears up to take pics and of course, zero this bitch in. Does a KAC Micro 2-600 mt. rear fly, or do I need the old school KAC 600 mt. BUIS P/N: 98474? |
|
Cage Codes:13269/1S002/3J629/0BJZ8/3S679
"What's wrong with you, Abu Hajaar?" |
Originally Posted By Snaps:
anybody know a place (preferably around SWPA) that's got the AEM5 in stock? I'd rather not have to buy it somewhere else and add months to an already idiotic wait. If not how bout a place in general that has them? ADCO is sold out. View Quote |
|
WTB:
- A.R.M.S. #22H Non lever stops for my Mk12 - Doctersight III - AN/PEQ 2 |
Originally Posted By JJREA:
LOL. We can't do memes? Bummer. I only have a few.... I do have an on topic question. Which doesn't have much to do with anything other than I've been buying a few magpul things lately. For some reason I can't for the life of me remember seeing a magpul stock on a Mk12 Mod1 or Mod 0. Seems like fixed and SOPMODs are the majority. And then the CAR stock on some Mod 0's. But now I'm thinking, maybe it's time to go back through the thread. Yikes. LOL. Maybe somebody can fill me in. I know we got the Hollands with Anyways.... ACS, CTR, STR on a Mk12??? Seems like I don't recall seeing that. Other than that pic with the UBR, couple pages back. Guy prone. View Quote |
|
|
|
Got a set of brand new ARMS #22 Medium rings yesterday and went to mount my scope tonight. One of the levers on the rings broke right off. Wasn't even pushing hard. Anyone else have this happen? Must be a defective ring....
|
|
|
Originally Posted By Snaps:
anybody know a place (preferably around SWPA) that's got the AEM5 in stock? I'd rather not have to buy it somewhere else and add months to an already idiotic wait. If not how bout a place in general that has them? ADCO is sold out. View Quote |
|
|
Originally Posted By NoahFN:
Got a set of brand new ARMS #22 Medium rings yesterday and went to mount my scope tonight. One of the levers on the rings broke right off. Wasn't even pushing hard. Anyone else have this happen? Must be a defective ring.... View Quote |
|
|
Originally Posted By NoahFN:
Got a set of brand new ARMS #22 Medium rings yesterday and went to mount my scope tonight. One of the levers on the rings broke right off. Wasn't even pushing hard. Anyone else have this happen? Must be a defective ring.... View Quote Some will require a pair of pliers to get off, others will flop open, Some will snap the throw lever when taking them on off, others will explode into several components if they smack against hard objects. Contact ARMs and they will send you a replacement, however. |
|
Cage Codes:13269/1S002/3J629/0BJZ8/3S679
"What's wrong with you, Abu Hajaar?" |
Originally Posted By NoahFN:
Got a set of brand new ARMS #22 Medium rings yesterday and went to mount my scope tonight. One of the levers on the rings broke right off. Wasn't even pushing hard. Anyone else have this happen? Must be a defective ring.... View Quote |
|
|
Originally Posted By IronBalaclava:
I went with #22s for the sake of clone correctness, but yeah, that sounds like typical ARMs Tri-Lock mounts. Some will require a pair of pliers to get off, others will flop open, Some will snap the throw lever when taking them on off, others will explode into several components if they smack against hard objects. Contact ARMs and they will send you a replacement, however. View Quote |
|
|
Originally Posted By IronBalaclava:
I've wrecked a few. Here's one ARMS "Exploder" from over ten years ago: http://img.photobucket.com/albums/v454/IronBalaclava/IBsblownoutArmsMount.jpg This one was holding an Aimpoint M68 to an M4. The carbine was leaned up against a wall, and when it tipped over, the result is what you see. The explosive separation of the mount components was.............Glorious! View Quote |
|
|
|
|
Originally Posted By STXDobie:
He has the "Make an Offer" option so toss him one. Interesting that it has the harder foam in it. Also, mine was pretty rough looking, similar to that one and I removed the foam and pressure washed it and it looks a lot better now. I contacted Pelican as well and they sent me new wheels and latches free of charge. View Quote View All Quotes View All Quotes Originally Posted By STXDobie:
Originally Posted By revottuneda4:
Mk12 pelican on eBay right now for $210 OBO plus shipping...well used. Looks like it had a Mod1 in it. Holding off since I figure I should finish my build first. Kinda really want though. |
|
"I'll tell you what war is about, you've got to kill people, and when you've killed enough they stop fighting." GEN Curtis LeMay
"Someday this war's gonna end..." LTC William Kilgore |
|
Dean Winchester wishes he was this cool
MD, USA
|
Originally Posted By asimpkinsjr:
checked today, sold out but I did email AE directly hopefully they have something they can sell. View Quote |
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
|
|
WTB:
URX II for SR-25(7.62) carbine length. A.R.M.S #36 swan sleeve-PEQ-2 or MOD with no notches for gen 3 PRI tube |
Originally Posted By Samson-Dogg:
Fucking madness!!!! https://www.AR15.Com/media/mediaFiles/330914/IMG-3374-177913.JPG View Quote Who wants to let me in on some FB action? Still sorting out the last of the parts for my Mod1 build and could use another source to search. |
|
|
Originally Posted By Samson-Dogg:
Fucking madness!!!! https://www.AR15.Com/media/mediaFiles/330914/IMG-3374-177913.JPG View Quote |
|
|
Nice. The paint job is killer.
|
|
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man. -Thousands and thousands of laws....All for just ten commandments. -"alot" is not a word. |
Originally Posted By Dobs013:
That's about right.... View Quote View All Quotes View All Quotes Originally Posted By Dobs013:
Originally Posted By Samson-Dogg:
Fucking madness!!!! https://www.AR15.Com/media/mediaFiles/330914/IMG-3374-177913.JPG The bore guides should be done by next Thursday is what they said. |
|
WTB:
URX II for SR-25(7.62) carbine length. A.R.M.S #36 swan sleeve-PEQ-2 or MOD with no notches for gen 3 PRI tube |
Originally Posted By Samson-Dogg:
Braceman says he will try the fsgb mod this weekend. I'm sure he can do it. It's very simple compared to what I've seen him do. The bore guides should be done by next Thursday is what they said. View Quote View All Quotes View All Quotes Originally Posted By Samson-Dogg:
Originally Posted By Dobs013:
Originally Posted By Samson-Dogg:
Fucking madness!!!! https://www.AR15.Com/media/mediaFiles/330914/IMG-3374-177913.JPG The bore guides should be done by next Thursday is what they said. |
|
|
Dean Winchester wishes he was this cool
MD, USA
|
Originally Posted By Samson-Dogg:
Fucking madness!!!! https://www.AR15.Com/media/mediaFiles/330914/IMG-3374-177913.JPG View Quote |
Cunnilingus aside, that is fucking awesome.
--secretwheelman Perfection can't be achieved from inside the rattle can. --RTUtah |
Originally Posted By IronBalaclava:
I've wrecked a few. Here's one ARMS "Exploder" from over ten years ago: http://img.photobucket.com/albums/v454/IronBalaclava/IBsblownoutArmsMount.jpg This one was holding an Aimpoint M68 to an M4. The carbine was leaned up against a wall, and when it tipped over, the result is what you see. The explosive separation of the mount components was.............Glorious! View Quote |
|
|
Originally Posted By dangerdan:
Someone will be along shortly to tell you you are not correct because your lower isn't US property marked, while they are looking at their $30 Anderson blem in sorrow. View Quote View All Quotes View All Quotes Originally Posted By dangerdan:
Originally Posted By HARMS4X:
This should get me a pass on non clone correct scope and mount?????????? I just won't paint a transferable M16a1! You know if you are really going to clone the fucker its a 32-36K rifle if you do it on a transferable A1. https://www.AR15.Com/media/mediaFiles/187307/IMG-0329-175115.JPG https://www.AR15.Com/media/mediaFiles/187307/IMG-0328-175114.JPG https://www.AR15.Com/media/mediaFiles/187307/IMG-0330-175116.JPG The ecos rail is to mount the pvs-22 https://www.AR15.Com/media/mediaFiles/187307/IMG-0331-175125.JPG |
|
"I'll tell you what war is about, you've got to kill people, and when you've killed enough they stop fighting." GEN Curtis LeMay
"Someday this war's gonna end..." LTC William Kilgore |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.