User Panel
|
You can also use a file if you don't have belt sander. Only takeoff the bare minimum, for me that was just filing off the finish
|
|
|
Originally Posted By rgb:
[youtube]<a href="http://s1286.photobucket.com/user/rbreden/media/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg.html" target="_blank">http://i1286.photobucket.com/albums/a616/rbreden/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg</a>[/youtube] View Quote Note to self, shamelessly copy rgb. |
|
|
Originally Posted By ArmyInfantryVet:
Ugh. I took it to 100 lbs, and they still don't line up. View Quote View All Quotes View All Quotes Originally Posted By ArmyInfantryVet:
Originally Posted By MILSPEC556:
Originally Posted By ArmyInfantryVet:
Originally Posted By lancecriminal86:
Originally Posted By ArmyInfantryVet:
How many lbs have you guys been tightening your Gen III handguards. I went to 45, and it seems like I need to tighten it down more, because the holes on the PEQ rail do no line up with the screw holes in the handguard. I did whatever was needed to get it to align. Previously it was more like 60, this time I had to go above 80. One of those cheap wheeler vices with the gas tube fittment key is getting tempting. Another thing I considered, I wish the PRI wrench had a "spy" hole for a drill bit or key, so you could apply pressure and push. That way when the key was perfectly aligned it would slide in and you could stop torquing. Thanks. I'll try going up to 60 first. This is for the barrel nut? (Never installed a PRI tube but I've installed a shit ton of barrel nuts) 2 Barrel nut installs ago I went to 95 ft lbs and still didn't get it lined up. I was pissed. Ended up cutting that nut off with a dremel, then installed new barrel nut (made by the same company) and got it aligned at 47 ft lbs. Moral of the story, it will vary from person to person/part to part. Ugh. I took it to 100 lbs, and they still don't line up. That sucks bro. I wouldn't go any higher as you aren't supposed to exceed 80 ft lbs anyways with most barrel nuts. But you have 2 good options, either face the end of the receiver, (only removing the finish, nothing more, and evenly) or ask PRI for a new barrel nut (which is basically the route I went minus PRI part) |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By lancecriminal86:
Note to self, shamelessly copy rgb. View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86:
Originally Posted By rgb:
[youtube]<a href="http://s1286.photobucket.com/user/rbreden/media/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg.html" target="_blank">http://i1286.photobucket.com/albums/a616/rbreden/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg</a>[/youtube] Note to self, shamelessly copy rgb. Go for it! Need new mk12 pics to feed my addiction |
|
|
Originally Posted By MILSPEC556: That sucks bro. I wouldn't go any higher as you aren't supposed to exceed 80 ft lbs anyways with most barrel nuts. But you have 2 good options, either face the end of the receiver, (only removing the finish, nothing more, and evenly) or ask PRI for a new barrel nut (which is basically the route I went minus PRI part) View Quote I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. I'm using a Mega upper. Could the upper not be in spec? |
|
|
Jesus is my copilot....and we're cruisin for pie.
TX, USA
|
Originally Posted By ArmyInfantryVet:
I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg I'm using a Mega upper. Could the upper not be in spec? View Quote View All Quotes View All Quotes Originally Posted By ArmyInfantryVet:
Originally Posted By MILSPEC556:
That sucks bro. I wouldn't go any higher as you aren't supposed to exceed 80 ft lbs anyways with most barrel nuts. But you have 2 good options, either face the end of the receiver, (only removing the finish, nothing more, and evenly) or ask PRI for a new barrel nut (which is basically the route I went minus PRI part) I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg I'm using a Mega upper. Could the upper not be in spec? while not highly likely, it happens from time to time. Facing the receiver involves a tool and lapping compound. Brownells and midway both sell receiver truing tools. I have one from brownells and while not every upper has needed it, they all get it. Yeah i know some guys shit an e-chicken over aluminum vs. steel barrel nuts and the wear it causes. Stripped uppers can be had for 40 bucks so nbd. |
Cunnilingus aside, that is fucking awesome.
--secretwheelman |
Originally Posted By ArmedFerret:
while not highly likely, it happens from time to time. Facing the receiver involves a tool and lapping compound. Brownells and midway both sell receiver truing tools. I have one from brownells and whole not every upper has needed it, they all get it. Yeah i know some guys shit an e-chicken over aluminum vs. steel barrel nuts and the wear it causes. Stripped uppers can be had for 40 bucks so nbd. View Quote View All Quotes View All Quotes Originally Posted By ArmedFerret:
Originally Posted By ArmyInfantryVet:
Originally Posted By MILSPEC556:
That sucks bro. I wouldn't go any higher as you aren't supposed to exceed 80 ft lbs anyways with most barrel nuts. But you have 2 good options, either face the end of the receiver, (only removing the finish, nothing more, and evenly) or ask PRI for a new barrel nut (which is basically the route I went minus PRI part) I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg I'm using a Mega upper. Could the upper not be in spec? while not highly likely, it happens from time to time. Facing the receiver involves a tool and lapping compound. Brownells and midway both sell receiver truing tools. I have one from brownells and whole not every upper has needed it, they all get it. Yeah i know some guys shit an e-chicken over aluminum vs. steel barrel nuts and the wear it causes. Stripped uppers can be had for 40 bucks so nbd. Merritt the furry Ferret nailed it once again. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Are there youtube videos that illustrate this?
|
|
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By lancecriminal86: Note to self, shamelessly copy rgb. View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86: Originally Posted By rgb: [youtube]<a href="http://s1286.photobucket.com/user/rbreden/media/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg.html" target="_blank">http://i1286.photobucket.com/albums/a616/rbreden/Mobile%20Uploads/B93386C5-768F-4678-BD21-AFD5A8B0767B_zpsdhpbqqws.jpg</a>[/youtube] Note to self, shamelessly copy rgb. |
|
"Not proud of everything I've done, but at least you know I did it well."
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By ArmyInfantryVet: I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg View Quote NVM, the PRI sleeve appears to have more of gap for the steps around the lock ring. |
|
"Not proud of everything I've done, but at least you know I did it well."
|
Originally Posted By secretwheelman: Your locking collar is entirely too far away from the upper receiver. View Quote View All Quotes View All Quotes Originally Posted By secretwheelman: Originally Posted By ArmyInfantryVet: I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg I guessed that, but the barrel nut that it sits against will not tighten any further. |
|
|
Dude....I don't get it.
You have well over 1/8" of space you need to move. How do you think shaving off a few thousandths off the receiver threads is going to give you 1/8"+ of space? |
|
Uncle
Sam's Misguided Children I was cloning before cloning was cool: Mk12, Mk13, Mk18, M4 Block II |
Originally Posted By secretwheelman:
Your locking collar is entirely too far away from the upper receiver. NVM, the PRI sleeve appears to have more of gap for the steps around the lock ring. View Quote View All Quotes View All Quotes Originally Posted By secretwheelman:
Originally Posted By ArmyInfantryVet:
I'm not sure what you mean Anyway, here are some pictures to help show what my problem is. http://s23.postimg.org/gz7c1rlfv/sideview.jpg http://s23.postimg.org/q5pmp1qob/peqtop2.jpg http://s23.postimg.org/9x9efkhu3/peqtop.jpg NVM, the PRI sleeve appears to have more of gap for the steps around the lock ring. Idk how his gap is that fat with the nut torqued to 100+ ft lbs. Hoping he didn't cross-thread the nut or someshit. It could definitely be an out of spec barrel nut or receiver though. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
|
Originally Posted By secretwheelman:
This pic from BCM looks like the gap is similar, so now I'm confused as well. http://www.bravocompanymfg.com/images/specification/2013/hd_mk12mod0.jpg View Quote View All Quotes View All Quotes Originally Posted By secretwheelman:
Originally Posted By ArmyInfantryVet:
Originally Posted By secretwheelman:
Your locking collar is entirely too far away from the upper receiver. I guessed that, but the barrel nut that it sits against will not tighten any further. http://www.bravocompanymfg.com/images/specification/2013/hd_mk12mod0.jpg Is his tube a gen III? Wondering if the gen 3 is supposed to have a gap considering the BCM pic. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By MILSPEC556: Is his tube a gen III? Wondering if the gen 3 is supposed to have a gap considering the BCM pic. View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556: Originally Posted By secretwheelman: Originally Posted By ArmyInfantryVet: Originally Posted By secretwheelman: Your locking collar is entirely too far away from the upper receiver. I guessed that, but the barrel nut that it sits against will not tighten any further. http://www.bravocompanymfg.com/images/specification/2013/hd_mk12mod0.jpg Is his tube a gen III? Wondering if the gen 3 is supposed to have a gap considering the BCM pic. Vet, that's not a Delta PEQ rail, is it? |
|
"Not proud of everything I've done, but at least you know I did it well."
|
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve.
The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. |
|
|
Originally Posted By ArmyInfantryVet:
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. View Quote Glad you got it sorted out bro. Gap-B-Gone. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By ArmyInfantryVet: You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. View Quote Glad you got it straightened out. |
|
"Not proud of everything I've done, but at least you know I did it well."
|
Originally Posted By ArmyInfantryVet: You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. View Quote Mod 1 Mafia is a simpler, much more enjoyable type of life. |
|
Uncle
Sam's Misguided Children I was cloning before cloning was cool: Mk12, Mk13, Mk18, M4 Block II |
Originally Posted By dangerdan:
Mod 1 Mafia is a simpler, much more enjoyable type of life. View Quote View All Quotes View All Quotes Originally Posted By dangerdan:
Originally Posted By ArmyInfantryVet:
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. Mod 1 Mafia is a simpler, much more enjoyable type of life. That. Definitely that. My biggest Mod 1 worry is how the fuck I'm gonna afford the glass. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By lancecriminal86:
Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86:
Originally Posted By ArmyInfantryVet:
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg That's an awesome pic. |
|
-Nemo me impune lacesset.
-Beware the fury of a patient man. -Thousands and thousands of laws....All for just ten commandments. -"alot" is not a word. |
Originally Posted By lancecriminal86: Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86: Originally Posted By ArmyInfantryVet: You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg lol, fuck'n Kilroy. |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
Originally Posted By lancecriminal86:
Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86:
Originally Posted By ArmyInfantryVet:
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. Nope, came to post that. Saw your pic and remembered I had to do the same thing. Ownage edit http://i.imgur.com/V6M5EGV.jpg My ex wife's last name is Kilroy. She used to draw that little guy everywhere lol |
|
|
"Not proud of everything I've done, but at least you know I did it well."
|
|
Originally Posted By ArmyInfantryVet:
You guys are going to make fun of me. But PRI did just email me the visual instructions on installing the Gen III handguard with the PEQ sleeve. The top rail on the handguards moves. You just unscrew the screws on top and slide it til it fits perfectly with your PEQ sleeve. So it's fixed guys. Thanks for the help though. View Quote Oh hell, I nearly posted this advice earlier today, but since I have not read the whole discussion, I figured someone must have mentioned this and didn't want to be that guy who gave an opinion that was already suggested 3 pages ago. |
|
|
Originally Posted By secretwheelman:
I remember watchin' Kelly's Heroes with my Dad when I was about 13. 12yrs later, there are times when I find myself doing the same. View Quote View All Quotes View All Quotes Originally Posted By secretwheelman:
Originally Posted By Davey_Sickboy:
My ex wife's last name is Kilroy. She used to draw that little guy everywhere lol 12yrs later, there are times when I find myself doing the same. This generation's Kilroy, at least for the Marines, has been "Wagner loves the cock". |
|
|
Originally Posted By eblack:
Just FYI for those stuck on slings. We used almost every decent 2 point on the market. I used an Ares Armor husky, a lot of vcas and vtac slings. I also used the butt stock adapter from the old specter sling I had back in the day. View Quote View All Quotes View All Quotes Originally Posted By eblack:
Originally Posted By dangerdan:
Originally Posted By dangerdan:
Originally Posted By HaveBlue83:
Originally Posted By dangerdan:
The eagle sling is junk. Those of us that didn't blow our entire paycheck away, bought a specter 3pt sling, as thay what was available at the PX. Leaps and bounds better than the eagle sling. The eagle sling was given out like candy on holloween, albeit the candy nobody likes. Cloner buys legit clone spec sling, dan shit talks said sling, offers less legit option in place (much like his nightforce haggling skillz). Refute if you must, but factz are factz. Nobody said it was the best...marginally good...or even that it didnt suck. Any alternative from issued eagle is NOT as correct as the eagle sling is from the original issue gear. Good on ya sir for getting a legit part to the puzzle :) You're right. I actually use my gear, and provided real world thoughts on something better than what Uncle Sam gives us. Enjoy your pageant show gun. Shall I talk about the Badge Big Latch also? Or is that not clone? My experience says otherwise. Also to add, unless you've been issued a Mk12 as your primary weapon, secondary to your Mk16/M4 service rifle, you don't have a lot of room to talk. Just FYI for those stuck on slings. We used almost every decent 2 point on the market. I used an Ares Armor husky, a lot of vcas and vtac slings. I also used the butt stock adapter from the old specter sling I had back in the day. I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! |
|
There are enough people in the world who could benefit from a good asswhipping that there was no need to be unpleasant to nice people.
|
I wish i kept that gteen eagle tas sling i had in 08. I found one in a supply connex on the fob. I think i traded it lol. I will check my toughbox to see what i find. I kept my 7 mags i had., kinds sentimental :)
|
|
|
Jesus is my copilot....and we're cruisin for pie.
TX, USA
|
Originally Posted By HaveBlue83:
I wish i kept that gteen eagle tas sling i had in 08. I found one in a supply connex on the fob. I think i traded it lol. I will check my toughbox to see what i find. I kept my 7 mags i had., kinds sentimental :) View Quote I found an HK stainless mag in a connex. That definitely came home. |
Cunnilingus aside, that is fucking awesome.
--secretwheelman |
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! View Quote I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By MILSPEC556:
I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. |
|
|
Originally Posted By lancecriminal86:
Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. View Quote View All Quotes View All Quotes Originally Posted By lancecriminal86:
Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. Shit. I got mixed up. As for the Alice strap sling, do it. DO it. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
|
Originally Posted By ArmedFerret:
Everyone knows there's only one sling that keeps you safe. http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/glowbeltsling_zpsffscibpn.jpg View Quote View All Quotes View All Quotes Originally Posted By ArmedFerret:
Originally Posted By MILSPEC556:
Originally Posted By lancecriminal86:
Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. Shit. I got mixed up. As for the Alice strap sling, do it. DO it. Everyone knows there's only one sling that keeps you safe. http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/glowbeltsling_zpsffscibpn.jpg I got 2 of em' but they ain't getting anywhere near my guns. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Originally Posted By MILSPEC556:
I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? The S-BRM. Swivel with notched legs. |
|
"Patriotism is supporting your country all the time, and your government when it deserves it." - Mark Twain
|
Originally Posted By MILSPEC556: I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556: Originally Posted By Dejavu: I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? The 240 AG in my squad had a 240 sling on his M4. He loved the thing. lol Function > Style |
|
|
Jesus is my copilot....and we're cruisin for pie.
TX, USA
|
|
Cunnilingus aside, that is fucking awesome.
--secretwheelman |
Originally Posted By MILSPEC556:
Shit. I got mixed up. As for the Alice strap sling, do it. DO it. View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By lancecriminal86:
Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. Shit. I got mixed up. As for the Alice strap sling, do it. DO it. Looks like I'm keeping my barrel, eh? Think I'll send it off and have flats added. |
|
|
Originally Posted By Hunterex:
Looks like I'm keeping my barrel, eh? Think I'll send it off and have flats added. View Quote View All Quotes View All Quotes Originally Posted By Hunterex:
Originally Posted By MILSPEC556:
Originally Posted By lancecriminal86:
Originally Posted By MILSPEC556:
Originally Posted By Dejavu:
I used a SAW sling. Wasn't fancy or tactical, but it damn sure was more comfortable! I feel that. I run a 240 sling on my Colt M4A1 clone, it's amazing what the difference of one chunk of padding does. So fellers, barrel should be here today I think. Gas block should be inbound from cornholio soon. And all my other shit is gonna be here monday. Next up I needs a got damn KAC rear, and a Harris/mount. Speaking of, which model of Harris 6-9 do I want for my mod 1? Barrel may be tomorrow, sorry. I think KOBKs upper today, your barrel tomorrow. As to slings, I really want to rig an M60/Alice pack strap hybrid 2 point, which is where the Vtac and Vickers came from. I think Augee rigged one up, it kinda fits with the early SPR too as far as time period goes. Shit. I got mixed up. As for the Alice strap sling, do it. DO it. Looks like I'm keeping my barrel, eh? Think I'll send it off and have flats added. Yeah lance hooked me up with a WOA for basically free. I am going to need another barrel for it. But who knows when MILSPEC will actually have money to buy it. Up to you my friend, keep it, hold onto it. Tis' up to you. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
|
Originally Posted By ARdvark:
read through the thread. what are the current best options for barrel? pic thread http://cdn3.volusion.com/xjhfl.toyeo/v/vspfiles/photos/MK12Mod1Upper-2.jpg?1418124081 View Quote Best would be Douglas. As in clone correct. Other bests that aren't in use would be WOA, Ballistic Advantage, Kreiger etc. I think there's a popular alternative section in the OP, posted by Utah but written by Lance. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
Easily bribed with mil rifle parts |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.