User Panel
ill take the 6 hole hg hal thanks, ill put up a 3 prong fh, may not be a usgi one but still 3 prong fh.
|
|
|
Haven't had time to dig through parts yet but I know I have a new standard carbine buffer, never been installed to my knowledge.
Pretty sure it's a BCM but don't know for certain. I'll see what else I have. |
|
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Haven't had time to dig through parts yet but I know I have a new standard carbine buffer, never been installed to my knowledge. Pretty sure it's a BCM but don't know for certain. I'll see what else I have. I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... Does it have the two ribs like this one https://www.mapartsinc.com/shop/details.asp?id=1592&iCat=21&iSubOne=397&iSubTwo=408 ? If yes, I am interested. |
|
Quoted:
Does it have the two ribs like this one https://www.mapartsinc.com/shop/details.asp?id=1592&iCat=21&iSubOne=397&iSubTwo=408 ? If yes, I am interested. View Quote Sorry, no. I added a picture for clarification. |
|
Quoted:
Sorry, no. I added a picture for clarification. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Does it have the two ribs like this one https://www.mapartsinc.com/shop/details.asp?id=1592&iCat=21&iSubOne=397&iSubTwo=408 ? If yes, I am interested. Sorry, no. I added a picture for clarification. Thank you. Was looking to replace one of those. |
|
|
Anyone need a "been there, done that" looking dark grey trigger guard? Has wear on the outside edges. Perfect for a bfpu build. Or anything used by the Israelis.
Trigger guard goes to Hipshot. |
|
PAY IT FORWARD PARTS PACKAGE:
I have a .750" Triangle guard retainer. I have an A1 mottled pistol grip that has the lower back end chewed up with a chunk missing out of the back seam - it might work as a repair piece or if you need a beater one for doing a forward grip - I can include an A2 grip if requested too if for repair, but the A2 has the texture ridges in the back. I also have a spare A1 Stock Swivel to replace a rusted out one - this is the style that is round and has a roll pin to hold it in, not the kind that is retained by the lower screw through the buttpad. I have another Colt style .312" front receiver takedown pin (not staggered - this is only for Colt receivers with the large hole). I would prefer to ship all together as this will cost me a bit more to send multiple packages - you can take what you don't need and get good karma passing it on to the next guy here. |
|
Quoted: PAY IT FORWARD PARTS PACKAGE: I have a .750" Triangle guard retainer. I have an A1 mottled pistol grip that has the lower back end chewed up with a chunk missing out of the back seam - it might work as a repair piece or if you need a beater one for doing a forward grip - I can include an A2 grip if requested too if for repair, but the A2 has the texture ridges in the back. I also have a spare A1 Stock Swivel to replace a rusted out one - this is the style that is round and has a roll pin to hold it in, not the kind that is retained by the lower screw through the buttpad. I have another Colt style .312" front receiver takedown pin (not staggered - this is only for Colt receivers with the large hole). I would prefer to ship all together as this will cost me a bit more to send multiple packages - you can take what you don't need and get good karma passing it on to the next guy here. View Quote |
|
|
|
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> View Quote View All Quotes View All Quotes Quoted:
Quoted:
Haven't had time to dig through parts yet but I know I have a new standard carbine buffer, never been installed to my knowledge. Pretty sure it's a BCM but don't know for certain. I'll see what else I have. I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. |
|
Quoted:
If this hasn't been spoken for, I'd like to claim it. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. It's yours. Shipped Saturday. |
|
Quoted:
Quoted:
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. It's yours. Thank you very much, sir. In return, I'll put up a smoothed .750 FSB, unknown maker (no markings at all, has front sight assy, no pins, also no bayo lug, would be good for a XM177 clone) and a .625 or .750 Triangle front cap, your choice. ETA: Still Available, corrected sizes, should have specified earlier, sorry for any inconvenience. |
|
Quoted:
Quoted:
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. It's yours. Shipped Saturday. Got it, Thanks again! |
|
Quoted: Thank you very much, sir. In return, I'll put up a smoothed FSB, unknown maker (no markings at all, has front sight assy, no pins, also no bayo lug, would be good for a XM177 clone) and a .625 Triangle front cap. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. It's yours. Thank you very much, sir. In return, I'll put up a smoothed FSB, unknown maker (no markings at all, has front sight assy, no pins, also no bayo lug, would be good for a XM177 clone) and a .625 Triangle front cap. |
|
Quoted:
I'll take them. Im gathering parts for a 607 build View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
I'll take the buffer and put up a like new DPMS CAR-15 stock body, fiberite, commercial diameter. I only ask that the usual suspects hold off a little bit, say 24 hours, before claiming it. Then maybe one of the less active retro-heads can get a chance at it and be inspired. Not that I think this will be a problem since it is an icky non-Colt item... <a href="http://s119.photobucket.com/user/hchandler/media/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg.html" target="_blank">http://i119.photobucket.com/albums/o130/hchandler/5f6ad068-74d6-42f5-bb0d-b1fc37a850ef.jpg</a> If this hasn't been spoken for, I'd like to claim it. It's yours. Thank you very much, sir. In return, I'll put up a smoothed FSB, unknown maker (no markings at all, has front sight assy, no pins, also no bayo lug, would be good for a XM177 clone) and a .625 Triangle front cap. Email sent |
|
Ok guys, it's time to bump this back to the top.
I'm going to throw in a 607 rear cap. It's the first one I made and the fit isn't quite right at the lower corners. Pretty decent but it won't pass QC. First person to E-MAIL me with "I'll Take it" gets it |
|
Quoted:
Ok guys, it's time to bump this back to the top. I'm going to throw in a 607 rear cap. It's the first one I made and the fit isn't quite right at the lower corners. Pretty decent but it won't pass QC. First person to E-MAIL me with "I'll Take it" gets it View Quote I'll take it, email sent |
|
I am putting a 607 rear handguard cap, not sure who makes it but it's the one Sherluk sells. Shoot me an email with an address.
|
|
I'm not sure if 37thguy is emailing you reference the "607 rear handguard cap, not sure who makes it but it's the one Sherluk sells," if so disregard, if not, I'll take it and shoot you an email.
|
|
|
I have a like new A2 pistol grip w/finger ledge, TWO Harris Bi Pod round adjustment knobs & a front round handguard ring. .750 ring
Payin it fwd. Email me at 37thguy at ameritech dot net |
|
|
Paying it forward. I got a nice set of Lone Star HG for triangle end cap. Probably from 80's ._ Sorry forgot rifle length
|
|
|
I never heard back from Hipshot, so the dark grey "been there, done that" trigger guard is still available.
|
|
I could use the grey trigger guard,but after the hand guards to JT don't know what I have to offer retro. Can I look around and does it have to be retro?. Gonna have to stop reading this thread.
|
|
While it is well worn at feed lips and I can see a small crack, it does function, however, you need to put in a follower and spring. I'll send a floor plate with it. I'm talk about a 20 rd GI mag body. Post here but email me if you would as well if you want it.
|
|
Quoted:
While it is well worn at feed lips and I can see a small crack, it does function, however, you need to put in a follower and spring. I'll send a floor plate with it. I'm talk about a 20 rd GI mag body. Post here but email me if you would as well if you want it. View Quote I have a definate need for your mag body. E-nail sent. Thanks |
|
If that sling keeper is still up for grabs I could use it.
Thanks, Jerrell |
|
|
Did I see a three prong up for grabs? I looked for it, but couldn't find it. Since I have been afflicted again, I need it, if not already taken
|
|
Digging through my stuff to see what I have for my build, I found I have a pair of nice 7 hole CAR-15 handguards with heat shields. It's been awhile since I have been on here, so I will start by giving them to a good home..
EDITED: they are the small diameter like the Colt 6 hole, NOT M4 carbine handguards. First I'll take it gets them. |
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.