User Panel
Posted: 1/26/2011 12:19:00 PM EDT
Rotary wet tumbler
|
|
Quoted: So you were impressed with the results then? Absolutely In fact just ordered two, one for Nick. Got a price break on the 2 for 1 shipping |
|
Quoted: isnt that just a washining machine Get back to the sofa gimp |
|
Quoted:
Did you also order the secret ingredient? Teaspoon of Reloader 15.... |
|
A mate has been in the shop today with a load of .338 cases done in one, with the ss media. Wow.
They were actually better than new. |
|
Mine is on it's way as well.
DaddyPig and myself have placed an order |
|
Quoted:
Told them so Cheaper than I thought and the results look good. Ultrasonic works well, but the polishing after with corn media makes them dusty. Seems like a lot less faffing. I read about it some time ago on Accurate Shooter but haven't known anyone with the system so I could see the results. |
|
Your item left the United States from ISC SAN FRANCISCO (USPS) at 10:29 pm on January 28, 2011. |
|
|
You do actually know that they are shit and don't work, they were made in China and will catch fire and burn your house down, they are also dangerous to small children and cats as the rotate so fast that they will rip your limbs off as soon as look at you.
|
|
Quoted:
You do actually know that they are shit and don't work, they were made in China and will catch fire and burn your house down, they are also dangerous to small children and cats as the rotate so fast that they will rip your limbs off as soon as look at you. That's the cat fucked then. Saves Ferdi ripping it ton pieces I suppose... |
|
Quoted:
Mine and Greenys have left USA too! Have your pins left Bangalore yet?, you f**kin' tightarse |
|
Quoted:
Mine and Greenys have left USA too! We know, you've already told us |
|
|
|
I'm looking into my crystal ball and seeing the future.
A future where Gavin has to turn down 10lbs of tiny stainless pins on his lathe coz they're 3 thou oversize and getting stuck in the flash holes |
|
Quoted:
I'm looking into my crystal ball and seeing the future. A future where Gavin has to turn down 10lbs of tiny stainless pins on his lathe coz they're 3 thou oversize and getting stuck in the flash holes Nah, they'll be rusty before then. |
|
Quoted:
I'm looking into my crystal ball and seeing the future. A future where Gavin has to turn down 10lbs of tiny stainless pins on his lathe coz they're 3 thou oversize and getting stuck in the flash holes I see a future where you pay £160 plus VAT and duty for something that they bought in India for £12 and so did I. |
|
Quoted:
You guys got your tumblers yet? Mine is at DaddyPig's house. I believe DaddyPig has been tumbling his brass today, so I'm just wating for a photo of nice shiny new brass. |
|
Quoted:
Awaitig clearance and customs charges Just been stung this morning for £80 on the Giraud.... |
|
Make sure you use a pH neutral WUL, I got mine from the Chefs at work.
|
|
Quoted:
Well I think the results speak for themselves.... On the left, brand new cases, middle, tumbled in corncob for 5 hours with Frankford Arsenal brass polish and right, tumbled 3 hours in Stainless Media, a drop of Fairy Liquid and Lemshine.. The STM cases have a silky lustre to them making the traditionally tumbled ones look down right dull! The primer pockets and insides are perfectly clean too.. http://gallery.me.com/taskers/100048/Brass01/web.jpg?ver=12975415220001 STM cases on the left, corncob tumbled in the middle and brand new on the right.. http://gallery.me.com/taskers/100048/Brass02/web.jpg?ver=12975416450001 |
|
Quoted:
Make sure you use a pH neutral WUL, I got mine from the Chefs at work. What's WUL? ETA.... Washing Up Liquid? |
|
Well.........................Hosepipe gave me a can of cleaned RG brass, and that's what piqued my interest in the STM thingy.
I was showing it to Limey1 the other night and the first 2 cases he picked out of the can has the pins stuch in the flash holes After a ratchet through the rest of the brass, we couldn't find any others with pins stuck in them |
|
Quoted:
Well.........................Hosepipe gave me a can of cleaned RG brass, and that's what piqued my interest in the STM thingy. I was showing it to Limey1 the other night and the first 2 cases he picked out of the can has the pins stuch in the flash holes After a ratchet through the rest of the brass, we couldn't find any others with pins stuck in them Looks like a flash hole uniforming session will be needed |
|
You may get the odd pin stuck in hole but if you use a separator to drain them and make sure you give them a good tumbling, after a few sessions you'll get fewer and fewer sticking. Its definitely worthwhile checking the flash holes though and you'll get far far few with pins in than you would corn cob media stuck.
If you don't check them and leave any pins in when you seat a fresh primer you'll be alerted to their presence by an audible alarm, if you are deaf do it in the dark and a bright flash will also alert you of any problems. |
|
Quoted:
You may get the odd pin stuck in hole but if you use a separator to drain them and make sure you give them a good tumbling, after a few sessions you'll get fewer and fewer sticking. Its definitely worthwhile checking the flash holes though and you'll get far far few with pins in than you would corn cob media stuck. If you don't check them and leave any pins in when you seat a fresh primer you'll be alerted to their presence by an audible alarm, if you are deaf do it in the dark and a bright flash will also alert you of any problems. Had 3 out of 82 cases with a pin 'bridged' in the neck, but no flash hole 'stickies'... |
|
The bridging will reduce provided you ditch the pins that get stuck.
|
|
Well it's finally arrived....at the parcelforce depot.
Might have a chance to pick it up by saturday The good news....only £34.09 to pay for the two ordered |
|
Mine's at DaddyPig's still.
My Giraud Trimmer is being delivered tomorrow though. |
|
Quoted:
Mine's at DaddyPig's still. My Giraud Trimmer is being delivered tomorrow though. A thing of beauty it is too.... Even comes with a U.K. 3 pin plug... |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.