User Panel
User Panel
User Panel
|
Posted: 2/14/2007 5:43:24 PM EDT
[#1]
Current home for my sear
|
|
|
|
Posted: 2/15/2007 1:40:03 AM EDT
[#2]
 |
|
|
|
Posted: 2/15/2007 10:15:39 AM EDT
[#3]
Osprey, do you have a good source for the curved SA 30-round mags? I have been looking for some...
|
|
|
|
Posted: 2/15/2007 10:31:32 AM EDT
[#4]
I wish....
|
|
|
|
Posted: 2/15/2007 10:54:17 AM EDT
[#5]
I love the 51's
|
|
|
|
Posted: 2/15/2007 3:08:51 PM EDT
[#6]
What is the recoil and muzzle blast like, and what is the actual length of the barrel.
Also is this a toy or a real tool at the end of the day? |
|
|
|
Posted: 2/15/2007 3:44:14 PM EDT
[#7]
Pretty much a range toy. I can't speak on the semi only 51 clones, but the HK 51 full auto I shot with the factory collapsible stock was a blast to shoot. It was surprisingly controllable, and I was able to get off controlled pairs. Mag dumps were a different story. Loud as hell with plenty of muzzle flash in broad daylight. I can't see a practical application for this weapon, but I wouldn't mind owning one for sheer entertainment.
|
|
|
|
Posted: 2/15/2007 4:26:39 PM EDT
[#8]
Here is mine 51 with a few other of my .308s , haven't had time to molycoat the 51KB.
|
|
|
|
Posted: 2/15/2007 6:49:20 PM EDT
[#9]
My humble little 51k(Thank you Nohair for your help!) Also needs to be refinished. Oh and yes, the barrel is chopped even with the front edge of the triplefame. 
|
|
|
|
Posted: 2/15/2007 7:54:43 PM EDT
[#10]
Here's my shortie (thanks NoHair!)
|
|
|
|
Posted: 2/16/2007 4:52:01 AM EDT
[#11]
I can get some HK made 30's...not cheap though. Like $50 plus shipping. |
|
|
|
|
Posted: 2/16/2007 11:50:24 AM EDT
[#12]
Wow, does anyone make a semi auto HK21 reciever? How the hell did you do that.
And where can you get real HK 30 rounders from, link? |
|
|
|
Posted: 2/16/2007 11:57:38 AM EDT
[#13]
All those beltfeds ARE semi auto receivers.
It's the registered sear that makes the difference. 
|
|
|
|
Posted: 2/16/2007 12:05:35 PM EDT
[#14]
Forgot about a few cool pics I have on a server somewhere....
  
|
|
|
|
Posted: 2/17/2007 3:24:02 PM EDT
[#15]
Here's some videos of the shooting today....
The vids don't do the experience justice. Every time a round goes off, there's a tremendous blast and fireball. The camera doesn't pick up the fireball every time, and when it does, it's much smaller on the vid than in real life. Quite an experience. THANKS NOHAIR!!! Video #1 Video #2 |
|
|
|
Posted: 2/17/2007 4:02:55 PM EDT
[#16]
it says the videos are nolonger available................. 
|
|
|
|
|
Posted: 2/17/2007 4:44:40 PM EDT
[#17]
He'll get em fixed. Was alot of fun Eyegun! Cant wait til next time!! |
||
|
|
|
Posted: 2/17/2007 6:00:33 PM EDT
[#18]
Youtube is still processing the vids. They'll be ready tomorrow morning probably. I think the links are good. I'll check tomorrow and if I need to fix anything, I will.
FYI, you can find a lot of good MG vids by going to youtube and searching for "Gorgegunners".... |
|
|
|
Posted: 2/17/2007 6:53:20 PM EDT
[#19]
Its funny, whenever I see that pic of me shooting Nohairs 51, its hard to believe that the night before it was raining sideways and destroyed a brand new tent! Crazy weekend that was! |
|
|
|
|
Posted: 2/18/2007 2:34:22 AM EDT
[#20]
   I think this stubby lil' beotch belongs to either NoHair or Pat.   now that is SHORT!! 
|
|
|
|
Posted: 2/18/2007 5:23:32 AM EDT
[#21]
But why?  And what about the HK21 rearsight, isn't that overkill?
|
|
|
|
|
Posted: 2/18/2007 6:55:38 AM EDT
[#22]
For the why, Because ITS AWESOME looking. not sure where your gonna hold it in front, but would love to see pictures of it shooting.
|
|
|
|
Posted: 2/18/2007 8:49:36 AM EDT
[#23]
|
|
|
|
Posted: 2/18/2007 9:51:24 AM EDT
[#24]
Sorry for the video delays/screwups. Youtube 'processes' the vids for over 12 hours sometimes on the weekends.
I hosted a few on Putfile. I don't like Putfile as much- you might have to stop the vid, let it fully load, then play it, otherwise it might studder, etc. Notice not only the flash, but the impact downrange. We're probably 60-70 yards downrange.Video #1 Here's another video the 30rd mags are definitely the ticket. I have a 40rd mag, but didn't have it out yesterday. |
|
|
|
Posted: 2/18/2007 11:19:48 AM EDT
[#25]
Because he can!!
|
||
|
|
|
Posted: 2/18/2007 11:42:44 AM EDT
[#26]
These things are frigging nasty........I want one!
 However the state of MI doesn't think I should have one.
|
|
|
|
Posted: 2/18/2007 12:02:00 PM EDT
[#27]
How do they make those extended mags? Looks like 2 HK steels welded together but what do you do for a spring?
|
|
|
|
Posted: 2/18/2007 12:08:31 PM EDT
[#28]
They just come that way.
HK made some 30 rounders, as did RDTS, et al. There were some factory CETME 30 rounders also, very cool. Wish I could get a few of those. I don't know who made my 40 rounder or what they did for the springs. |
|
|
|
Posted: 2/20/2007 6:22:52 AM EDT
[#29]
Does MI allow you to have a pistol?
|
|
|
|
|
Posted: 2/20/2007 2:39:01 PM EDT
[#30]
There ya go.
|
|
|
|
Posted: 2/21/2007 5:48:27 AM EDT
[#31]
Sweet
|
|
|
|
Posted: 2/21/2007 6:06:44 AM EDT
[#32]
Some guys braze the springs together, some 'crimp' them together.  The mag shown below is three 20s welded together and holds 44rds and, it runs flawlessly. Many thanks to BustOff. 
|
|
|
|
|
Posted: 2/21/2007 8:35:24 AM EDT
[#33]
Could you just weld the springs together? Also are they reliable or just a jamomatic? How many rounds can you get in 2 welded steel 20s?
|
|
|
|
Posted: 2/21/2007 2:00:25 PM EDT
[#34]
You could always roll your own springs. I wouldn't see why the 20rd springs wouldn't work for a little while. On a related note, anyone know where to get the 20rd CETME mags cheap? These would make excellent donor mags for 30rders since they are curved. |
|
|
|
|
Posted: 2/21/2007 7:55:54 PM EDT
[#35]
If anyone wants any I can get Cetme "30" round mags, for $50 shipped to your door. If you want any just PM me, keep in mind it will take about two weeks for them to get to you. |
|
|
|
|
Posted: 2/22/2007 12:51:13 AM EDT
[#36]
Three 20rd CETMEs welded together, holds 47rds.
|
|
|
|
Posted: 2/22/2007 12:24:05 PM EDT
[#37]
That is what I am talking about. Might just be a bit overkill.
|
|
|
|
|
Posted: 2/22/2007 2:08:15 PM EDT
[#38]
Yeeeeaaaah!
 I would custom paint "Got 7.62?" down the side...
|
|
|
|
Posted: 2/26/2007 5:25:52 PM EDT
[#39]
Is it just me, or is the tip of the bullet sticking out the end of the bbl on that short little biotch? If so, that is stupid, and can't be safe.
|
|
|
|
Posted: 2/26/2007 6:13:11 PM EDT
[#40]
 kEEP LOOKING! Hint... .the cocking tube slot is drawn on with a sharpie and there is no trunion welds!
|
|
|
|
|
Posted: 2/27/2007 5:40:11 PM EDT
[#41]
Here's another Video. There's a fireball with every shot but the camera doesn't pick them all up. Also, you don't see the ring of fire in real life, but the cam picks that up.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
