User Panel
This has been a busy week.
Loaded 400 Hornady 50gr Z-Max over 24gr H322 (got 16# for $150) and Fed 205M in Win 223 brass. Did load development last weekend and this charge netted me sub 1/2 MOA. Finished FL sizing 400 pieces of Win 223 brass (last of 1k I got a few weeks back). Need to run through SS media to remove the lube and then to the Giraud for trim / chamfer / debur. I'll hand prime these next weekend. Ordered 50# of RP 223 brass and I'll be prepping that over the coming weeks. Loaded up 25 Nosler 69gr HPBT CC (5 each @ 24, 24.5, 25, 25.5, 26). I'll shoot these as soon as I can hit the range again |
|
|
Neck sized a bunch of .270 brass and got it all ready to load up. I must be gettin lazy
|
|
|
I reloaded for the first time today :)
Reloaded some 124gr FMJ 9mm for my XD. Went to range and it shot pretty good. Going to do some more testing when my order from PV comes in hopefully end of this week. |
|
|
Loaded a run of 1,000 .223 with 55 grain Dogtown bullets & 8lbs IMR-8064 XBR. 300 of those got reloaded twice for not passing L.E. Wilson case gage. Next is unbolting XL650 and bolting the quasi-550 up for a run of 75 grain hpbt.
|
|
" God Bless Our Snipers ".
|
|
I looked at my reloading bench...
|
|
|
I converted my 550B case feeder to feed .223. Modified 32 H&R drop tube and guide, added 650 small rifle case feed plate, and modified the cam feed bracket (changed lower angle from 45 degrees to 35 degrees) so the cases would clear the decapping pin! I can't take credit for the methodogy - all is revealed on Brian Enos web site (Nah! I'm not benefiting by revealing the info).
|
|
|
"There is a fine line between having balls and being a dumb ass" GB
"Machine Gunners - Accuracy By Volume" |
Originally Posted By ReefRaider:
Processed about 2200 5.56LC case's and added them to my stock. I still need to run about 12K more though this week. Made some more of the home brewed case lube too. Ready to load. http://imageshack.us/a/img11/6264/a1upper020.jpg Pleas elaborate |
|
|
I recently bought the Little Crow World's Finest Trimmer, so I got it all set up for trimming to 1.750". Doesn't take much, just have a trimmed case on hand, put it in, loosen the set screws and move it to the depth you like. Tighten the screws, and away you go.
Then I trimmed a number of case trying it out. Works very well, and it's much easier on your hand than my RCBS Trim Pro. Tumbled a couple hundred .223 cases. Set up one 550B for .223, and dialed it in. Ready to go. Set the other 550 up for .45 acp. I manage to go out there at least once a day and do something. I'll still use the Trim Pro for lower volume cases that need trimming, but the WFT is the way to go for .223". It trims, chamfers, and deburrs all at once. Uses your cordless drill for power. According to the documentation and his video, you should get 10-12 cases per minute and they're accurate to about .001". |
|
|
Originally Posted By brow_tines:
Originally Posted By ReefRaider:
Processed about 2200 5.56LC case's and added them to my stock. I still need to run about 12K more though this week. Made some more of the home brewed case lube too. Ready to load. http://imageshack.us/a/img11/6264/a1upper020.jpg Pleas elaborate Enjoy http://www.ar15.com/forums/t_6_42/305174_Case_Lube_for_cheap_bastards.html |
|
"There is a fine line between having balls and being a dumb ass" GB
"Machine Gunners - Accuracy By Volume" |
Originally Posted By ReefRaider:
Processed about 2200 5.56LC case's and added them to my stock. I still need to run about 12K more though this week. Made some more of the home brewed case lube too. Ready to load. http://imageshack.us/a/img11/6264/a1upper020.jpg That's some serious bling! |
|
|
Originally Posted By Minuteman419:
Got these in from Wideners. http://www.ar15.com/media/viewFile.html?i=44820 Got everything to assemble but the energy right now. Danny Dam I need some |
|
|
|
"...But there's also this: there are over 5,000 men in this city, who know that being a policeman is an endless, glamourless, thankless job that's gotta be done. I know it, too, and I'm damn glad to be one of them." Joe Friday
|
Sadly.....absolutely nothing. I just got some stuff moved into our house in TN from AK but haven't been able to get my loading room set up yet. Give me time, it will get done.
|
|
|
Posted a new how-to thread on this very fine reloading forum.
Now as soon as I hang up, I will work on my autocad drawing of my upcoming wood-framed annealer. The goal is a compact version. Hope I can do it justice. Yes, these projects take a toll on my reloading. On the other hand, tinkering for me is rated right up there even, so I don't mind. But when I get all my stuff where I want it, and purring like a contented kitty, I will reload.....a lot. I think. Retirement is still two years away....if I really do it. This weekend in the first weekend in a month that I can go to the range and shoot. I'm planning on that....must make ammo first or its going to be a short trip. What can I say, I'm a grasshopper. You ants have a two year supply I know. Monday is my Gun Club's December newsletter production deadline.....I'm the editor....that takes a whole day away from reloading and tinkering with reloading. |
|
|
Originally Posted By A2cat-man: Sadly.....absolutely nothing. I just got some stuff moved into our house in TN from AK but haven't been able to get my loading room set up yet. Give me time, it will get done. Hey, as long as it gets done! |
|
"...But there's also this: there are over 5,000 men in this city, who know that being a policeman is an endless, glamourless, thankless job that's gotta be done. I know it, too, and I'm damn glad to be one of them." Joe Friday
|
Originally Posted By GWhis: Posted a new how-to thread on this very fine reloading forum. Now as soon as I hang up, I will work on my autocad drawing of my upcoming wood-framed annealer. The goal is a compact version. Hope I can do it justice. Wood framed annealer you say? (My welding is less than impressive) |
|
"...But there's also this: there are over 5,000 men in this city, who know that being a policeman is an endless, glamourless, thankless job that's gotta be done. I know it, too, and I'm damn glad to be one of them." Joe Friday
|
Originally Posted By Herb3:
Sized and lubes some 45 Colt and 45 ACP boolits I cast last week. http://i643.photobucket.com/albums/uu154/hparham3/DSCN0331.jpg 298 260 gr SWC for the Blackhawk in 45 Colt and 664 200 gr SWC for my 1911 http://i643.photobucket.com/albums/uu154/hparham3/DSCN0330.jpg Accurate Molds 45-260K and 45-200H Those are some nice looking bullets! |
|
“A government big enough to give you everything you want is a government big enough to take from you everything you have.” President Gerald Ford
Proud member of Team Ranstad |
On my end, loaded some 6.8 only 30 rounds, just started this caliber, so I am just getting started to see what 6.8 likes the best. I think I loaded these at 27.3 grains H335, for 115 gn, bthp.
|
|
“A government big enough to give you everything you want is a government big enough to take from you everything you have.” President Gerald Ford
Proud member of Team Ranstad |
Picked up about 2k of mixed range brass, .45 and .40. Just got to sort it now.
|
|
|
I intended to reload tonight, but I sat at the bench and listened to the last couple hours of the Agenda 21 audiobook that I started on my route this morning. I didn't load anything, but I did tidy the bench a little and made a long list of supplies (mainly reloading and food stock) I hopefully won't need.
I did learn how to fold a nifty tinfoil hat though... |
|
|
Originally Posted By Henny:
Originally Posted By A2cat-man:
Sadly.....absolutely nothing. I just got some stuff moved into our house in TN from AK but haven't been able to get my loading room set up yet. Give me time, it will get done. Hey, as long as it gets done! LOL....soon. |
|
|
Bought some more powder a week ago. Cleaned up the reloading area last night, putting stuff away where it should go, then loaded up 80 rounds of .30-06 using 45.0 grains of H4895 and 168 SMK's. Need to replenish my stock for the Garand and Springfield matches for next year.
|
|
|
Finally looks like I've about got the Lube Master sorted out , couple more adjustments and a new length of spring tube and should be GTG.
It's the second unit Magma made back in the 70's so it's a quite a bit slower then the current model but I can deal with watching it lube 3500 an hour |
|
The War on Drugs was instigated, not to curtail drug use and traffic, but as a cover for gradually taking away our Constitutional Rights.
|
Originally Posted By angus6: Finally looks like I've about got the Lube Master sorted out , couple more adjustments and a new length of spring tube and should be GTG. It's the second unit Magma made back in the 70's so it's a quite a bit slower then the current model but I can deal with watching it lube 3500 an hour Yeah, I think I could definitely deal with that rate! |
|
"...But there's also this: there are over 5,000 men in this city, who know that being a policeman is an endless, glamourless, thankless job that's gotta be done. I know it, too, and I'm damn glad to be one of them." Joe Friday
|
Originally Posted By Henny:
Originally Posted By GWhis:
Posted a new how-to thread on this very fine reloading forum. Now as soon as I hang up, I will work on my autocad drawing of my upcoming wood-framed annealer. The goal is a compact version. Hope I can do it justice. Wood framed annealer you say? (My welding is less than impressive) Exactly my problem....me welding challenged. But you don't have to wait for me. Another gentleman posted nice pictures of his wood one towards the end of the great Biggdawg Annealer thread. |
|
|
Originally Posted By Slayfan21:
Got a new tool to empty .38 special cases http://i1092.photobucket.com/albums/i407/slayfan21/100_2532S.jpg Glad I got that 38 conversion for my xl650 Nice 637. I will say though, after running a box of 50 through mine Friday night that mass reloads might not be an issue. It's not like shooting 357's but you still feel the lack of mass pretty quickly. |
|
Patriotism: being disappointed you can't shoot your political rivals. -- bikedamon
|
Two thirds of the way to being fat, dumb and lazy.
MS, USA
|
Yesterday I finished wet tumbling the 1000 .223 cases I recently received. It was done in a Thumbler's-- lot's of loads. Next up, dust off the super swage 600 and start removing primer crimps.
|
The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. --Eleanor Roosevelt
|
Just finished the initial cutting to convert 50 .223 cases to 300 BLK. Plan on doing 100 to 150 more tomorrow night.
|
|
|
Trimmed and primed 450 223's.
|
|
|
Bought a new to me press and building the bench tomorrow.
|
|
|
Originally Posted By FrontyOwner:
I looked at my reloading bench... This is about where I'm at right now. Too many other things going on. Got everything I need but time |
|
|
300 rounds of 5.56. LC brass, TAC, pulled M855 bullets.
|
|
Scouts Out
|
If I'm curt with you it's because time is a factor. I think fast, I talk fast and I need you guys to act fast if you wanna get out of this. So, pretty please... with sugar on top. Clean the f'ing car!
|
NRA Life Member
Garand Collectors Association Member Zanesville Rifle Club |
Well last night I straightened up the reloading bench for the first time in months. I sorted through resized 9mm brass and picked out 50 that the primer pocket was clean on. After priming, I set up the press for 9mm with 4gr of bullseye and reloaded those 50.
This was while the battery on the cheap HF cordless drill was charging. I used that to spin the primer pocket cleaner on about 200 more 9mm brass. I finished up with dumping the 50 nickel .38 spl brass I shot last friday into the tumbler. So far today I've removed the 50 .38 spl brass from the tumbler. If I don't end up with the stomach bug everyone else on earth has I'll probably reload those 50 .38 spl, but I think instead of 3.0gr of bullseye I'm going to set up the micro bar to do 2.7 gr and see if I like that better. |
|
Patriotism: being disappointed you can't shoot your political rivals. -- bikedamon
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By dnmccoy: I knocked out about 200 30/06 to blast with some friends :) Heres the ones I made with the brass I got from Assaultrifler http://i129.photobucket.com/albums/p216/dnmccoy/1354740534886.jpg The LC Match brass put to good use. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By sburggsx:
Originally Posted By Slayfan21:
Got a new tool to empty .38 special cases http://i1092.photobucket.com/albums/i407/slayfan21/100_2532S.jpg Glad I got that 38 conversion for my xl650 Nice 637. I will say though, after running a box of 50 through mine Friday night that mass reloads might not be an issue. It's not like shooting 357's but you still feel the lack of mass pretty quickly. I hear that 100%, I shot about 40 rnds of my K frame +P ammo today...... Loaded up some at normal 38 pressure when I got home also prepped 200ish 223 bass |
|
|
Sorted two large collanders of once fired range pick up mixed brass. Loaded so 25-06 with h4831SC & IMR 4350 and topped them with 100gr sierra's and Nosler 110 Accubonds. going to test them this week end. If all goes well. Then its off to the Dillon to load some much needed 38 and the old 45acp. Then for christmas the wifey should be getting me a quick change and cal conversion for 9mm then I can go to town.
|
|
|
last night i sorted 1000 308 cases by head stamp. Then i sized and trimmed all the lc11 cases -- 300 or so also checked the camber on my new 308 bolt gun measuring max length to ogive with the bullets i have on hand, then inputted the data in my excel work book for the new rifle.
|
|
|
ran 1500 .223 through the 550 last night so I can reload them this weekend.. I am almost out since I have shoot more than I rolled the past 6 months due to work
I did figure out my 1200 trimer and has cut time off that side of the prep!!! Now I want to clean my room.. |
|
Where a man can be free...
|
Picked up a safe and all the lumber I need to get the loading bench built. I'll get that done this weekend.
|
|
|
So, what did you do today in the world of reloading?
Spent way too much F'ing money on stuff I didn't really need |
|
|
Originally Posted By InfiniteGrim:
So, what did you do today in the world of reloading?
Spent way too much F'ing money on stuff I didn't really need Whatever it was, it is always needed. |
|
|
|
Originally Posted By A2cat-man:
Originally Posted By InfiniteGrim:
So, what did you do today in the world of reloading?
Spent way too much F'ing money on stuff I didn't really need Whatever it was, it is always needed. Not everyone needs brass 7.63x54r, but the brass was only $30 per 100 |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.