User Panel
VA-gunnut has added this thread to the Night Vision Picture Threads post at the top of the forum.
|
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Drink drink, drain your can, raise your can high.
It's not the side effects of the peeps, I'm thinking it must be love. |
10mm fan
|
Originally Posted By autumnsong:
Trying to post something worth viewing after RustedAce posts is rough. My 9mm AR is a bit different so I'll go ahead and throw these pics up. Suppressed and SBRd K9GL with LAS/TAC IR laser and Inforce WML white/IR light. ...and an Estwing! |
|
|
It is pictures like these that force me to keep pissing my wife off. |
|
|
FYI: Sarcasm is my native language
|
Drink drink, drain your can, raise your can high.
It's not the side effects of the peeps, I'm thinking it must be love. |
Originally Posted By TV-PressPass:
Question for folks more experienced with IR lasers: Does anyone mount their unit on a 45 degree offset rail? The reason I ask is: I've got my eye on a Drakos I laser setup with a remote switch. It'll be going onto my Tavor, and while I could install the full flattop rail, I'm trying to keep this setup tight and light (hence the 15" SBR barrel as well) But when something like that is offset at an angle, obviously your windage & elevation doesn't match up downrange anymore. Is it enough to zero a laser at 100 yards on the flattop and then rotate it to the 45 offset mount? I've done that before, but with a 7moa reflex sight at 25 yards, so the difference was negligible. http://farm9.staticflickr.com/8503/8297509519_6244bc1e3d_c.jpg If you zero an optic then put it somewhere else, its not zeroed anymore. Mount optics/lasers where you'll utilize them, the adjust the laser to where it neds to be. Same as zeroing any other optic. Angle the gun if you need to, but don't use an optic thatsnot zeroed. |
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Mount it where it will "live" and adjust it like that. Just be aware that you will have to adjust it differently - it's like an Etch-A-Sketch, move it one click azimuth, then one elevation. A little bit more complicated than simply mounting it horizontal or vertical, but assuming it doesn't outrun the adjustments, it should zero just fine.
~Augee |
|
|
"Angle the gun if you need to, but don't use an optic thatsnot zeroed."
Derp. Angling the gun on the bench makes a hell of a lot more sense. Add in the etchasketch style and it should be pretty do-able. I'm trying to keep the rifle light without adding the full flattop or handguard rails. And no, I learned a long time ago that using an optic that hasn't been zeroed and saying "it'll be fine" just leads to wasted ammo and frustrating range sessions. Worse things still if you're actually counting on it. Thanks guys! |
|
|
Originally Posted By TV-PressPass:
"Angle the gun if you need to, but don't use an optic thatsnot zeroed." Derp. Angling the gun on the bench makes a hell of a lot more sense. Add in the etchasketch style and it should be pretty do-able. I'm trying to keep the rifle light without adding the full flattop or handguard rails. And no, I learned a long time ago that using an optic that hasn't been zeroed and saying "it'll be fine" just leads to wasted ammo and frustrating range sessions. Worse things still if you're actually counting on it. Thanks guys! It does, as when we first came out with our SAR to mount an offset RDS, this was especially important to bench the gun at an angle to initially get you close. With an IR laser this can get even more complicated with the line of sight aspects and mounting at a 45deg angle. Vic |
|
Tactical Night Vision Corporation - TNVC, INC.
http://www.tnvc.com [email protected] (909) 796-7000 "Eliminating our adversaries 940nm at a time" |
The 2nd amendment is not just a right, it's a responsibility. So train like it...
|
Whacked a skunk with this last weekend. Was out looking for a Dillo digging up my yard when I saw skunk approaching. Decided to take him out if he kept coming my way. Put the IR laser on him from about 30 yards, poof!@ He suddenly had 9 .30 holes in him and was knocked back 25 feet.
I use the T-1 for day shots. |
|
|
|
Originally Posted By Smatthew:
http://i1277.photobucket.com/albums/y484/snyberg44/SmatthewCarbine_zps18c16648.jpg CQBL at 12? Is there any splashback from the lasers being that close to the front sight? |
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Originally Posted By TCBA_Joe:
Originally Posted By Smatthew:
http://i1277.photobucket.com/albums/y484/snyberg44/SmatthewCarbine_zps18c16648.jpg CQBL at 12? Is there any splashback from the lasers being that close to the front sight? The red laser just a little at the end of the front sight guard when it's folded. The IR laser makes the faintest of streaks down the middle. That's a MI gas block FS. I may file down the guard on the red side at some point. ETA: in either case the aiming point is round and I can't see the splash back when I've got the rifle shouldered. |
|
|
|
Drink drink, drain your can, raise your can high.
It's not the side effects of the peeps, I'm thinking it must be love. |
I moved mine back a notch from the end because I'm worried about melting the emitter. Am I being needlessly paranoid? |
|
|
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
TCBA_Joe,
Those come standard with a set of 5 or 6 pattern generator filters. The filters actually tone down the laser enough for use fairly up close. Also the various shapes make it pretty easy to pick up, particularly if you are hunting/shooting with a group. What it really needs is an adjustable cap for the IR illuminator. It does have a neutral density filter, but that really shortens up the range and is mainly for indoor use. Something like a PVS-7 adjustable IR light cover may do the trick. |
|
|
Originally Posted By ihon:
TCBA_Joe, Those come standard with a set of 5 or 6 pattern generator filters. The filters actually tone down the laser enough for use fairly up close. Also the various shapes make it pretty easy to pick up, particularly if you are hunting/shooting with a group. What it really needs is an adjustable cap for the IR illuminator. It does have a neutral density filter, but that really shortens up the range and is mainly for indoor use. Something like a PVS-7 adjustable IR light cover may do the trick. Interesting. Thanks for the info. However, since it's not mine I'll pass the info along and it should come in handy if the filters are still laying aroung. Once again, before I get the "oh noes that's illegal, someone call Agent Wu" treatment, this is an LEA issued piece of equipment he let me get some pics of. I couldn't afford the $2-3K to buy one even if I could. |
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
|
|
|
|
So I quit the Homeland Security Department, and got myself a steady job, and though she tried her best to help me, well she could obstacle, but she could not chug.
|
Originally Posted By mhpoole:
Colt LE 6920 10.3" Surefire MB556K Surefire MINI Surefire 952v DBAL i2 Larue mount / T1 Micro Vltor iMod KAC RAS Colt LE6920 TA31F / Larue T1 Micro / Larue offset DBAL i2 RED TNVC ITT NightEnforcer Gen3 PVS14 Nice set ups. Oregon have any pigs up there yet? |
|
Pigs are evil little bastards!
Herpetologist LaRuemiNaughty |
Alea iacta est
|
Originally Posted By bobweaver: I don't think so. If you are this way look me up brother.Originally Posted By mhpoole: Colt LE 6920 10.3" Surefire MB556K Surefire MINI Surefire 952v DBAL i2 Larue mount / T1 Micro Vltor iMod KAC RAS Colt LE6920 TA31F / Larue T1 Micro / Larue offset DBAL i2 RED TNVC ITT NightEnforcer Gen3 PVS14 Nice set ups. Oregon have any pigs up there yet? |
|
|
Uploaded with ImageShack.com
Uploaded with ImageShack.com Uploaded with ImageShack.com Still unsure on mounting location but I like it towards the rear of the rail since its out of the way and keeps the weight more centered. |
|
|
Gun Control works on the premise that murderers follow laws.
Be prepared. Semper CCW. |
That seems like a hell of a brake for a .22!
Does it work well enough though? |
|
|
Originally Posted By TV-PressPass:
That seems like a hell of a brake for a .22! Does it work well enough though? Suppressor not pictured. |
|
Gun Control works on the premise that murderers follow laws.
Be prepared. Semper CCW. |
The first couple rounds of the motor pool rolling over someone are fun, but after that it's just watching a red smear in the road kind of get spread around a little-Aimless
ARFCOM Nickname - Dozer |
|
Does anybody with a CQBL know if you could put one on top of an ak sporting an Ultimak rail? Trying to figure out if that is a viable option, I know it will block the sights but will the beams clear the front sight hood or ears? I imagine they would be right at the height of the fsp, maybe on either side of it. I could mount an optic behind the cqbl pretty easily.
|
|
|
|
|
|
|
Originally Posted By CT-Shooter:
fairly new to this, but since i am using a peq2a that takes up a lot of rail space, i put it on the side, it seems like most of you have it mounted to the top rail, is there any disadvantage to mounting your ir device on the side rail? <a href="http://s95.photobucket.com/user/riceslayer302/media/IMG_20130518_215728_498_zps351206a4.jpg.html" target="_blank">http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20130518_215728_498_zps351206a4.jpg</a> View Quote View All Quotes View All Quotes Originally Posted By CT-Shooter:
fairly new to this, but since i am using a peq2a that takes up a lot of rail space, i put it on the side, it seems like most of you have it mounted to the top rail, is there any disadvantage to mounting your ir device on the side rail? <a href="http://s95.photobucket.com/user/riceslayer302/media/IMG_20130518_215728_498_zps351206a4.jpg.html" target="_blank">http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20130518_215728_498_zps351206a4.jpg</a> TNVC covered this question in their June 2012 newsletter quite well: Laser Placement by: Chip With the advent of the Class1 IR Laser systems from LDI, we are seeing a lot more lasers showing up on rifles. This is great, because using an IR laser is the most effective way to employ your night vision goggles. But, we are also seeing a lot of shooters improperly mounting their new lasers. By this, I mean placing the laser on the side of the gun. I generally teach people to mount their laser at the 12 o'clock rail position if at all possible. The reason for this is simple: it makes getting your hits at varied distances a whole lot easier. If you mount your laser at 12 o'clock and zero it the same as your optic, you are setting yourself up for success because you already know your holds for your optic. Well, they are now the same for your laser. At distances other than the exact distance of your zero, you can hold for elevation and squeeze the trigger. That's all there is to it. But, if you mount the laser at the 3 or 9 o'clock position, you add complications into your firing solution. I'm not a fan of side-mounting a laser unless I absolutely have to in order to clear real estate for other mission-essential accessories like grenade launcher sights, or clip-on night vision devices. This is usually the reason why Warfighters side mount their lasers. Another reason is that their issued optic mount is a 100% co-witness with their iron sights, seating the red dot sight too low and causing the laser to partially obstruct their sight picture through the glass. But, this shouldn't be an issue for the civilian or Law Enforcement professional. Just buy a high mount. It's better anyway. But I digress. Lasers go straight on to infinity from their emitter. They are not affected by gravity like bullets. At the point of impact of your zero, they will cross with the projectile and continue forward until they run out of energy. A top-mounted laser causes you to only compensate for elevation in this case. But, a side-mounted laser will continue left or right past the point of impact for your zero, respective to which side it is mounted on the rail. Now, you have to compensate for elevation and windage. And, since I'm not that good at math, I like to make it as simple as possible. So, if you aren't running other gear at the 12 o'clock position, do yourself a favor and put your laser there. I'd consider moving the EOTech back a bit and top mounting if possible. That said, as my picture in this thread shows, I've got my IR laser on my OBR mounted on the side to leave room for a clip-on when I can afford one. |
|
http://www.transasianaxis.com - Please visit for the latest on Russia/China/DPRK/Middle East threat news
|
Official AR15.com GD call sign: Kickstand
TN, USA
|
Does anyone make a fixed or folding front sight that's skeletonized, or has a well-spaced hole drilled in the tower to allow a beam to shine through?
|
|
Originally Posted By Ryan_Ruck:
TNVC covered this question in their June 2012 newsletter quite well: I'd consider moving the EOTech back a bit and top mounting if possible. That said, as my picture in this thread shows, I've got my IR laser on my OBR mounted on the side to leave room for a clip-on when I can afford one. View Quote View All Quotes View All Quotes Originally Posted By Ryan_Ruck:
Originally Posted By CT-Shooter:
fairly new to this, but since i am using a peq2a that takes up a lot of rail space, i put it on the side, it seems like most of you have it mounted to the top rail, is there any disadvantage to mounting your ir device on the side rail? <a href="http://s95.photobucket.com/user/riceslayer302/media/IMG_20130518_215728_498_zps351206a4.jpg.html" target="_blank">http://i95.photobucket.com/albums/l133/riceslayer302/IMG_20130518_215728_498_zps351206a4.jpg</a> TNVC covered this question in their June 2012 newsletter quite well: Laser Placement by: Chip With the advent of the Class1 IR Laser systems from LDI, we are seeing a lot more lasers showing up on rifles. This is great, because using an IR laser is the most effective way to employ your night vision goggles. But, we are also seeing a lot of shooters improperly mounting their new lasers. By this, I mean placing the laser on the side of the gun. I generally teach people to mount their laser at the 12 o'clock rail position if at all possible. The reason for this is simple: it makes getting your hits at varied distances a whole lot easier. If you mount your laser at 12 o'clock and zero it the same as your optic, you are setting yourself up for success because you already know your holds for your optic. Well, they are now the same for your laser. At distances other than the exact distance of your zero, you can hold for elevation and squeeze the trigger. That's all there is to it. But, if you mount the laser at the 3 or 9 o'clock position, you add complications into your firing solution. I'm not a fan of side-mounting a laser unless I absolutely have to in order to clear real estate for other mission-essential accessories like grenade launcher sights, or clip-on night vision devices. This is usually the reason why Warfighters side mount their lasers. Another reason is that their issued optic mount is a 100% co-witness with their iron sights, seating the red dot sight too low and causing the laser to partially obstruct their sight picture through the glass. But, this shouldn't be an issue for the civilian or Law Enforcement professional. Just buy a high mount. It's better anyway. But I digress. Lasers go straight on to infinity from their emitter. They are not affected by gravity like bullets. At the point of impact of your zero, they will cross with the projectile and continue forward until they run out of energy. A top-mounted laser causes you to only compensate for elevation in this case. But, a side-mounted laser will continue left or right past the point of impact for your zero, respective to which side it is mounted on the rail. Now, you have to compensate for elevation and windage. And, since I'm not that good at math, I like to make it as simple as possible. So, if you aren't running other gear at the 12 o'clock position, do yourself a favor and put your laser there. I'd consider moving the EOTech back a bit and top mounting if possible. That said, as my picture in this thread shows, I've got my IR laser on my OBR mounted on the side to leave room for a clip-on when I can afford one. thanks for posting that, i am going to try to rearrange things after reading that |
|
|
|
Originally Posted By JK07:
http://i1290.photobucket.com/albums/b523/JK-07/a4b66dbf-1ab6-4083-845c-135c6ffcaecd_zps2195dfb0.jpg Work gun. View Quote You win. |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.