My smith was willing to make one for me, but it would cost $100 for him to do it.
He also told me about a place in the metroplex that has nothing but parts. I went over there and found a sight that I hoped would work. I gave them $2 for the sight, put it on and took it to the range, a tap hear and a tap there and it shoots almost dead on at 20 yards.
Now I have to find a mag that fits the commander frame that holds more that 5 rounds. I do not know if this mag is messed up or what. I tried a chip McCormick but it would not lock in, I do not know if the notch on the mag was not caching on the mag catch or what. I could always suck it up and just get a mag that hangs out the bottom of the frame.
This is going to be a project for sheer. I will need to replace a few things to hopefully make it completely reliable. Out of 45 ball and 50 hollow point bullets I had 2 stove pipes, 1 malfunction (slide not going all the way forward) and 2 slide not locking back on the last round (mag)
Over all I'm happy, It is different and shoots pretty good, not as good as my Sig, but for spending under $300 and getting something to learn about 1911 I do not think I did to bad!
Thanks for all the help!