Quoted: Thanks again Chris. I'll probably go with the KAC foregrip now that I know how it attaches. I though it was some kind of allen or hexhead setup like a scope mount. I'm just experimenting with verticle grips. BTW, does the antishock Z32 bezel cure the 6P problems as a weapon attachment that I've read about? What have been your experiences. Sorry for all the dumbass questions, but this is all a new thing for me, being an M1 Garand / M1A guy until my 6601 HBAR started dumping those little bullets all in one little ragged hole ;) Appreciate your time.
|
Let me give you an idea of my shooting arrangement over here. I'm stationed here in Korea, and there is no way for me to fire my AR's anywhere other than my unit M16 ranges, which I happen to run.
And there's the problem - I've been the only person to run the tower, so it's hard for me to shoot. This past Tuesday we had a range with about 6000 excess rounds to shoot (end of the fiscal year), and I didn't fire a single one. Just too damn busy.
Anyway, this means that I haven't had much of a chance to work out the 6P's. Also, I've never really used the standard bezels, having switched them out for the Z32's right when I bought them.
Fobus light mount update - It was REALLY pissing me off! Seems the rail mating surface tapered toward the front, resulting in the mount being VERY difficult to remove. Had to file the rail mating surface even more, so now the mount fits good.
While I was trying to remove the mount from the rail, I had yanked the light right out. I don't think I had enough of the light's knurled surface engaging the mount's light mounting clamps.
I inserted the 6P deeper into the mount, then tightened the HELL out of the clamp and loctited the screw, so I'll have to see if the light shifts whenever I get a chance to shoot.
I'm now thinking back to the KAC mounts, and that they now come with thumbscrews, so if I can get a hold of four of the thumbscrews, that might be a good deal.
Chris