So it seems nearly every single bcg I find is out of stock or is 250$ or more I found a recoil technologies bcg from delta team tactical in stock for a good price anybody know if there good quality.
Posted: 6/23/2021 12:52:27 PM EDT
[#1]
DTT is shit.
Stay away, or buy at your own risk.
You might get a 308 bcg or a 5lb bunch of bananas.
Bunch of retards working over in their qc dept, shipping, customer service, if you can ever get them to respond.
Posted: 6/23/2021 1:07:59 PM EDT
[#2]
Tool craft or LMT.
Get in line and w—a——i———t…
Posted: 6/23/2021 1:30:50 PM EDT
[#3]
I’ve had good results with Aero BCG’s
Posted: 6/23/2021 5:44:22 PM EDT
[#4]
I've used the Brownells 308 nitride BCG for several of my AR10 builds in 308 and 6.5CM. works great and has the HP firing pin. about $210 and in stock at this time. promo code TAG gets you $15 off, $9.95 S&H.
ETA: i remove one of the 2 extractor o-rings from mine, but others leave both o-rings in and works fine. one of these YMMV things.
ETA2: I stay away from DTT like the plague.
Posted: 6/23/2021 6:43:38 PM EDT
[#5]
I have three of the Brownells .308 BCG and have had no problems with any of them used with Aero M5 uppers and lowers with BHW, X-Caliber, and DPMS barrels.
Posted: 6/23/2021 7:28:59 PM EDT
[#6]
I ordered the brownells as they had them in stock. I believe but I'm not sure that toolcraft makes the bcg for brownells
Posted: 6/24/2021 11:44:38 AM EDT
[#7]
Can't go wrong with Toolcraft!
Posted: 6/24/2021 11:28:00 PM EDT
[#8]
Fulton Armory makes a really nice .308 BCG.
Posted: 6/24/2021 11:29:24 PM EDT
[#9]
I'd say toolcraft
Posted: 6/27/2021 12:28:42 AM EDT
[#10]
aero nitrite bcg,s are super nice and in stock. 229.00 delivered
Posted: 6/27/2021 10:59:06 PM EDT
[#11]
Stag 10 BCG or Rubber city Solid and reliable
Posted: 6/28/2021 2:52:56 AM EDT
[#12]
You may want to check into Luth AR, or KAK.
Posted: 7/5/2021 11:00:26 PM EDT
[#13]
WHAT EVER YOU CAN FIND NOWDAYS. YOU HAVE NO CHOICE
Posted: 7/7/2021 12:29:08 AM EDT
[#14]
Well, after FINALLY (Don't use fedex) getting my bcg I fired 3 rounds and it seems to be good. I don't know how the extractors are on these but it's very difficult to move but it was extracting fine. There's some rather heavy marks on the brass on the bottom where that pin is and where the extractor is don't know if that's normal or not.