Quoted: Lets try this...... LINK
Or this....LINK
Or this.....LINK
|
Gotcha.
The piece pictured is not the same as the two I own. Looks like it might be a later version; with the thick front walls, and the exhaust holes in the front. Kind of funky looking.
Can't comment on the model pictured. The two pieces of mine have the three rows of comp holes as in the pic, but the front end is longer, and has the standard type M16A1 flash supppressor slots. They are also smaller in diameter than the the picture appears to be. Sorry I don't have pic posting capability or I'd do so.
Way back when I first got my Galil piece, we mounted it on a buddy's class 3'd rifle and did some comparison burst firing w/the issue flash suppressor vs. the Milbrake. Firing 4-5 round bursts at 20 yards, the as issued front end gave us a diagonally rising impact line about three inches high and 6 inches accross. With a properly adjusted MilBrake, the burst groups were about two inches high and ZERO inches accross. The MilBrake totally eliminated the sideways dispersion that occurs when the rifle tends to recoil away from the bulk of the shooters body
Even with a semi auto rifle, this would mean less need to repostion the rifle after each shot, giving you a much faster follow up shot. That was enough to make me order an AK type the next day, and if I wasn't such a stickler for keeping it "as issued" appearing, I would have gotten one for the XM177E2 clone, which was the only AR I had at the time. Now, I wish I had