User Panel
Posted: 7/21/2005 9:19:04 PM EDT
How does one obtain a KAC upper with the URX II?
I'm interested in having an upper with the freefloating M203 mounting. |
|
You can't as KAC does not sell uppers and the URX II is presently unvailable due to unfilled military contracts. There is hope for the URX II though. Maybe next year, if they ever catch up on their military obligations.
|
|
I believe it would be available if you bought a complete KAC rifle with one installed, but try to find a complete KAC rifle.
|
|
|
Obviously one can, it's just really really hard. Hey Altav, did you ever get your recce updated with a URX II and KAC front sight/gas block? |
|
|
DUFFY,
YOU'RE CERTAINLY A LIKELY CANDIDATE FOR ONE, WITH AS MUCH GEAR AS YOU HAVE BOUGHT FROM US OVER SO LONG A PERIOD OF TIME. IF I GET REALLY LUCKY AND GET SOME MORE, I'LL LET YOU KNOW. WES |
|
Duffy: You freakin' suck! Corey |
|
|
Aw shucks, please pencil me in for the it , Top Ramen here I come
|
|
What about good ole KD? |
|
|
|
Hopefully, my KAC SR-15 will look like that someday (once I get out of NY). Sigh!
|
|
I just realized that you asked me this... The parts were originally for my SAM-R but that got sold off in my quest for an SR-25 MK11. I still have the FSB and I haven't taken possession of the URX yet - still negotiating the price. To be honest, I'm not sure that it's worth the $$$ since it's a complete upper that I would be purchasing and the only person that I know that has the tools to take it apart is Wes @ MSTN and it'll cost some change to have him swap it out to another upper - let alone the hassle of having to FedEx it back and forth. Knowing me, I'll more than likely buy it. I should be getting some final detailed photos of it within the next few days so I'll post them and see if people think it's worth the asking price. |
|
|
|
|
|
|
Any chance a mere mortal can get one of the KAC flip FSB with a bayo lug?
Cause I don't think PRI makes a flip front with the pig sticker mounting bracket. . . |
|
|
Thats the one.
And I figure I may as well spend the $$$ once. . . |
|
|
I was wondering when you were going to let the cat out of the bag...
|
|
|
Yeah - I know and you have a URX on there too - and I hate you!!! Just kidding! Still trying to figure out what project this one will be for. Funds are low so I need more time to gather the cash then figure out what rifle it needs to go on. Now if I could find a URX. Spooky |
|
|
|
For all you guys with the unobtanium KAC gear - you suck - every last one of you!
|
|
Very nice! And thanks mongo! Spooky |
|
|
And I thought I was the lucky one when I tracked down a new KAC SR-25 RAS.
|
|
When you get it, can you tell me if those holes between L37 and L35 work with the KAC quick detach sling swivels? Oh, when you finish with it we are going to need pics! Thanks! Spooky |
|
|
any information as to how many the military bought and what they are usig them for? is it replacing the kac ris in the sopmod package?
|
|
going on sr25 rifles from my understanding |
|
|
Why you.... Sigh...so jealous |
|
|
altav -- very very nice
Spooky - nope they dont - they are threaded as well for bolts (you just dont need to use them...) Rob556 - the RAS unofficially already replaced the RIS -- IIRC only a few USN units are still using it. RAS MRE unturn replaced the RAS in a unit. URX is available on both the 7.62 and 5.56mm versions. KAC aint saying where they sent them though... |
|
KevinB - what bolts go in there? What are the bolts used for? I'm just trying to figure out why KAC took the time to put them in - and apparently thread them - if there is no real use for them. Sounds like a pointless waste of time that only increases the cost. I guess I'm showing my lakc of knowledge of the URX!!! Spooky |
|
|
If your using a EGLM or FF M203 (or FF Masterkey) --- you SHOULD use the bolts. However just running the handguard panel there is really no need to use them and you can leave the other bolts in the launcher.
|
|
The threaded holes you see are in the removable lower rail of the URX. Since you only need like one URX srcew on each side (although 2 for each side are provided) the other threaded holes will accept our (KAC) sling swivel studs, etc. The holes are standard 1/4-20 thread. |
|
|
Learn something new everyday -- I guess I skimmed over the user manual Thanks coldblue |
|
|
Cool. You could answer all my questions by simply sending me a URX - heck, I'll even pay for it. On that note, and since you are the KAC rep who reads and posts here - any idea when or if the URXs will be more available on the open market for us KACohlics? And thanks for the reply KevinB... Spooky |
||
|
You can send a MO to my PO Box at... If all goes well, I'll have it in my hands on Tuesday! |
|
|
Now I know I hate you!!! |
||
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.