User Panel
User Panel
User Panel
|
Posted: 9/25/2019 12:10:52 PM EDT
[#1]
Just posted on the other thread.
Quoted: Guys, For the M4A1 cloners, an update and a few questions. We got in the barrels from FN today. We are waiting on the flash hiders. It will be about two weeks until the product is on the website. We will be doing an upper and a Rifle build kit. As we are waiting on the flash hiders, we are just wanted to see what configurations you would like on the upper and rifle kit. Carry handle? Rear sight? etc. Thanks! Josiah |
|
|
|
Posted: 9/25/2019 3:16:29 PM EDT
[#2]
Rear sight, assuming it isnt a Magpul rear sight. Any thoughts on what sight might be offered?
|
|
|
|
Posted: 9/25/2019 6:16:25 PM EDT
[#3]
I'm fine with the same garden variety M4 set up as the Freedom Series. Basic GI set up, don't think I want a carry handle. Not looking for Magpul accessories on it. Given my choice, I'd like a PSA marked BCG, only so there is no questioning where it came from, but that's not a deal breaker. I'm very excited. Thank you PSA.
|
|
|
|
Posted: 9/25/2019 9:06:24 PM EDT
[#4]
I agree with some comments on the other thread. Basic furniture, no sight, premium BCG. I have most of the accessories to put on already (including a bayonet to make the gun graber’s head hurt!)
|
|
|
|
Posted: 9/26/2019 1:44:51 AM EDT
[#5]
Quote HistoryQuoted:
I agree with some comments on the other thread. Basic furniture, no sight, premium BCG. I have most of the accessories to put on already (including a bayonet to make the gun graber’s head hurt!) Basic "milspec" parts. No extras or magpul rail type crap Would hope the barrels are offered in a chrome lined parked finsh to be as close to M4 spec as can be. |
|
|
|
Posted: 9/26/2019 2:43:26 PM EDT
[#6]
Quote HistoryQuoted: This. Basic "milspec" parts. No extras or magpul rail type crap Would hope the barrels are offered in a chrome lined parked finsh to be as close to M4 spec as can be. |
|
|
|
Posted: 10/1/2019 11:51:05 AM EDT
[#7]
I couldn't wait. I got a 6921 upper and had Adco pin an extended A2
|
|
|
|
Posted: 10/1/2019 1:36:42 PM EDT
[#8]
Please no marking on the BCG. I want it to look as issued
|
|
|
|
Posted: 10/7/2019 12:03:06 PM EDT
[#9]
Just curious as to whether any decisions have been made? Trying to decide on what direction I should head next based on what happens here
|
|
|
|
Posted: 10/7/2019 1:21:44 PM EDT
[#10]
I couldn't wait any longer since the dsa 14.5 m4 barrels came back in stock. Got one on the way.
|
|
|
|
Posted: 10/8/2019 9:02:48 AM EDT
[#11]
Quote HistoryQuoted:
Just curious as to whether any decisions have been made? Trying to decide on what direction I should head next based on what happens here Thank you, Josiah |
|
|
|
Posted: 10/8/2019 4:45:53 PM EDT
[#12]
Will they have a standard A2 flash hider with spacer? Or extend length flash hider?
|
|
|
|
Posted: 10/9/2019 2:14:51 AM EDT
[#13]
Quote HistoryQuoted:
Will they have a standard A2 flash hider with spacer? Or extend length flash hider? |
|
|
|
Posted: 10/9/2019 9:58:23 AM EDT
[#14]
Quote HistoryQuoted:
We are working on the configurations now. The barrel will be a 14.5" FN chrome-lined barrel. The upper and bcg will not be marked with our logo. We are trying to truly make these uppers and/or kits truly clones. We are working on some furniture now. I will keep you updated as I get more info. Thank you, Josiah Quote HistoryQuoted:
Quoted:
Just curious as to whether any decisions have been made? Trying to decide on what direction I should head next based on what happens here Thank you, Josiah |
|
|
|
Posted: 10/9/2019 12:45:45 PM EDT
[#15]
Quote HistoryQuoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/9/2019 3:59:57 PM EDT
[#16]
Quote HistoryQuoted:
I believe this was still be determined. I know Josiah was gauging interest in the thread in General Discussion. Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. Quote HistoryQuoted:
Quoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/10/2019 9:38:13 AM EDT
[#17]
Quote HistoryQuoted:
Kac ras “similar” would be cool. UTG is only one who makes decent quad rails at good price. Would be nice if PSA could also. Quote HistoryQuoted:
Quoted:
Quoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/10/2019 8:23:04 PM EDT
[#18]
Quote HistoryQuoted:
Those trying to do "clones" won't be throwing UTG rails on their guns. I think the best thing for PSA to do is offer the bare bones minimum and let people go out and try to shop for the other accessories because there are just too many variations and blocks to try and clone. Sticker shock is a thing for a lot of people if you add too much on there Quote HistoryQuoted:
Quoted:
Quoted:
Quoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/11/2019 1:11:39 PM EDT
[#19]
Quote HistoryQuoted:
See DSArms "Service Series Block 1" URGs. PSA could easily pull it off. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/11/2019 9:28:39 PM EDT
[#20]
Quote HistoryQuoted:
Yeah but how many people are actually buying block 1s? Buy leaving the furniture off you allow people to build Block 1s or 2s without having the need to source/buy/stock the necessary parts as the dealer. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
Quoted: So is PSA going to make hand guards similar to KAC RAS? Or something like MI or Troy? Have not heard what the final outcome or vote was. Most people seemed to be asking for cheap furniture to keep the cost down and then they would be able to mount whatever rail/handguard they wanted. Some were wanting the KAC Ras. |
|
|
|
Posted: 10/12/2019 9:32:30 AM EDT
[#21]
Quote HistoryQuoted: Yeah but how many people are actually buying block 1s? Buy leaving the furniture off you allow people to build Block 1s or 2s without having the need to source/buy/stock the necessary parts as the dealer. A stock of RAS M4s priced right at PSA would be damn nice though. 
|
|
|
|
Posted: 10/12/2019 10:27:51 AM EDT
[#22]
Quote HistoryQuoted:
One can buy the same URG bare bones also. But I get what you are saying as far as from a manufacturer/dealer aspect. A stock of RAS M4s priced right at PSA would be damn nice though. Quote HistoryQuoted:
Quoted: Yeah but how many people are actually buying block 1s? Buy leaving the furniture off you allow people to build Block 1s or 2s without having the need to source/buy/stock the necessary parts as the dealer. A stock of RAS M4s priced right at PSA would be damn nice though. |
|
|
|
Posted: 10/12/2019 11:07:44 AM EDT
[#23]
Crank out a hundo of these only with M4 profile bbls for starters....
|
|
|
|
Posted: 10/14/2019 10:08:55 AM EDT
[#24]
Quote HistoryQuoted:
Crank out a hundo of these only with M4 profile bbls for starters.... https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20191012-100605_Samsung_Internet-1121441.jpg |
|
|
|
Posted: 10/14/2019 11:51:28 AM EDT
[#25]
Quote HistoryQuoted:
That should be a standard item, I waited for years for them to come back in stock. Finally gave up. Quote HistoryQuoted:
Quoted:
Crank out a hundo of these only with M4 profile bbls for starters.... https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20191012-100605_Samsung_Internet-1121441.jpg 
|
|
|
|
Posted: 10/14/2019 11:59:58 AM EDT
[#26]
I caught what you meant, true M4 profile should always be carbine length gas.
Hopefully PSA comes through on these, sounds like they’re on the right track thankfully. |
|
|
|
Posted: 10/14/2019 2:13:49 PM EDT
[#27]
Quote HistoryQuoted:
Didn't see it was a mid gas, carbine was my intent. Quote HistoryQuoted:
Quoted:
Quoted:
Crank out a hundo of these only with M4 profile bbls for starters.... https://www.AR15.Com/media/mediaFiles/416992/Screenshot_20191012-100605_Samsung_Internet-1121441.jpg |
|
|
|
Posted: 10/14/2019 2:49:13 PM EDT
[#28]
Quoted:
I caught what you meant, true M4 profile should always be carbine length gas. Hopefully PSA comes through on these, sounds like they’re on the right track thankfully. Quoted:
I knew what you meant. 
They'd go faster than condoms at the Olympic games. 
|
|
|
|
Posted: 10/16/2019 2:52:24 AM EDT
[#29]
Quote HistoryQuoted: This |
|
|
|
Posted: 10/16/2019 6:04:46 AM EDT
[#30]
Quote HistoryQuoted:
Hopefully it's just an A2X or an A2 with a spacer this time. I bought a PSA complete 14.5" upper way back in 2011 or 2012 and it had a Yankee Hill Phantom 5C1. Quote HistoryQuoted:
Quoted: This https://www.ar15.com/forums/general/Palmetto-State-Armory-has-lost-a-customer-/5-2109794/&r=81136891&dlnk=1#i81136706 Before treatment/coating. 
|
|
|
|
Posted: 10/16/2019 3:21:39 PM EDT
[#31]
Quote HistoryQuoted:
Hopefully it's just an A2X or an A2 with a spacer this time. I bought a PSA complete 14.5" upper way back in 2011 or 2012 and it had a Yankee Hill Phantom 5C1. ETA: or a 14.7" barrel. |
|
|
|
Posted: 10/17/2019 11:02:39 PM EDT
[#32]
Any update on these uppers?
I have a few lowers patiently waiting. |
|
|
|
Posted: 10/17/2019 11:47:38 PM EDT
[#33]
What he said ??.. I have at the very least 1 lower ready and willing for one of these uppers! As a side note, any clue at what the price ranges will be for these uppers and or kits?
|
|
|
|
Posted: 10/18/2019 9:57:08 AM EDT
[#34]
Quote HistoryQuoted:
Any update on these uppers? I have a few lowers patiently waiting. Thanks! Josiah |
|
|
|
Posted: 10/18/2019 10:21:47 AM EDT
[#35]
Thanks for the update, and I know I speak for more than just my self, we appreciate your efforts in making these uppers as authentic as possible!
|
|
|
|
Posted: 10/22/2019 6:09:43 PM EDT
[#36]
For anyone still following - looks like these got put up today.
https://palmettostatearmory.com/psa-chf-14-5-carbine-length-5-56-nato-1-7-m4a1-upper-without-bcg-or-charging-handle-pin-and-welded.html edit: tried to delete avantalink |
|
|
|
Posted: 10/22/2019 6:24:16 PM EDT
[#37]
Just ordered one 2 min ago! Should be a solid upper for a clone build I am currently putting together.. Hopefully they keep these going for the long haul, as I see cloners buying these up fast !
|
|
|
|
Posted: 10/22/2019 8:15:01 PM EDT
[#38]
"M4A1 upper".....
Heavy profile bbl? M203 flats? @PalmettoStateArmory |
|
|
|
Posted: 10/22/2019 8:24:29 PM EDT
[#39]
Quote HistoryQuoted:
"M4A1 upper"..... Heavy profile bbl? M203 flats? @PalmettoStateArmory |
|
|
|
Posted: 10/22/2019 8:41:21 PM EDT
[#40]
Quote HistoryQuoted:
It's a nice upper and great value for what you get |
|
|
|
Posted: 10/22/2019 9:17:51 PM EDT
[#41]
Just ordered one. I’ll echo everyone else and say I’m curious on the barrel profile. Although, gov’t or SOCOM would be fine with me. I just hope they left off the typical laser engraved PSA logo on the side of the upper. They mentioned that it wouldn’t be there, I just I hope that remained the case.
|
|
|
|
Posted: 10/22/2019 9:57:29 PM EDT
[#42]
Quote HistoryQuoted: Although, gov’t or SOCOM would be fine with me. Besides, M4A1 is all about the fatties.
|
|
|
|
Posted: 10/22/2019 10:22:55 PM EDT
[#43]
So can we expect some build kits on these or different variations?
|
|
|
|
Posted: 10/23/2019 9:00:38 AM EDT
[#44]
Quote HistoryQuoted:
So can we expect some build kits on these or different variations? |
|
|
|
Posted: 10/23/2019 12:04:27 PM EDT
[#45]
Quote HistoryQuoted: Ahhh, but man, those SOCOM barrels are shooters. Besides, M4A1 is all about the fatties. |
|
|
|
Posted: 10/23/2019 12:26:02 PM EDT
[#46]
Quote HistoryQuoted:
"M4A1 upper"..... Heavy profile bbl? M203 flats? @PalmettoStateArmory Thanks! Josiah |
|
|
|
Posted: 10/23/2019 12:26:47 PM EDT
[#47]
Quote HistoryQuoted:
Just ordered one. I’ll echo everyone else and say I’m curious on the barrel profile. Although, gov’t or SOCOM would be fine with me. I just hope they left off the typical laser engraved PSA logo on the side of the upper. They mentioned that it wouldn’t be there, I just I hope that remained the case. Thanks, Josiah |
|
|
|
Posted: 10/23/2019 12:27:59 PM EDT
[#48]
Quote HistoryQuoted: It is a Heavy Socom with M203 flats! It is not a true clone, but just what we could get done at the moment. Thanks! Josiah |
|
|
|
Posted: 10/23/2019 12:28:38 PM EDT
[#49]
Quote HistoryQuoted:
So can we expect some build kits on these or different variations? Thanks, Josiah |
|
|
|
Posted: 10/23/2019 2:13:18 PM EDT
[#50]
Quote HistoryQuoted:
Nice. Thanks. Quote HistoryQuoted:
Quoted: It is a Heavy Socom with M203 flats! It is not a true clone, but just what we could get done at the moment. Thanks! Josiah Thanks, Josiah |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
