User Panel
Posted: 6/17/2020 1:13:28 PM EDT
Well, post em up!
But if you could also jot down some words about the pros and cons along with if you would buy again. Post one pic or multiple knives, this way those who are trying to decide on a survival knife can get an idea! |
|
I have a few but currently this is what I have been playing with and carrying on the pack.
Survive! Knives GSO 4.1 Attached File |
|
Attached File
Attached File Esee 6. It’s a damn good knife, but depending on the survival situation, a smaller/lighter knife may be a bit more practical. |
|
+1 for the USMC KA-BAR knife. Tough, harder 'n hell steel, takes a good edge IF you give it some TLC. Mine has a serrated clip for cutting wet rope. I wish they'd had the shorter version (5" instead of 7"). It would be a bit easier to handle. And a slightly larger, more sturdy hand guard. |
|
|
Quoted: https://www.AR15.Com/media/mediaFiles/277150/906D8DB4-ADAE-4D58-8F52-8FFF1F3C85C6_jpe-1465405.JPG https://www.AR15.Com/media/mediaFiles/277150/B3191D11-3F20-47A7-B93C-817A5A3DED2E_jpe-1465407.JPG Esee 6. It’s a damn good knife, but depending on the survival situation, a smaller/lighter knife may be a bit more practical. View Quote Love the -6 How come the 6 is usually the only knife in any group of pictures that looks like it's seen some actual use? Attached File |
|
Quoted: +1 for the USMC KA-BAR knife. Tough, harder 'n hell steel, takes a good edge IF you give it some TLC. Mine has a serrated clip for cutting wet rope. I wish they'd had the shorter version (5" instead of 7"). It would be a bit easier to handle. And a slightly larger, more sturdy hand guard. View Quote Sounds like you want the Aircrew Survival Egress knife. |
|
|
|
Quoted: Love the -6 How come the 6 is usually the only knife in any group of pictures that looks like it's seen some actual use? https://www.AR15.Com/media/mediaFiles/171243/ESEEFire2_png-1465704.JPG View Quote Give me time!!! Soon mine (Esee 4) should be looking like that toward the end of the year. |
|
|
|
Quoted: https://i.imgur.com/D21qPtj.jpg https://i.imgur.com/uVkCSyU.jpg ESEE 4 in a custom sheath I made. Great knife. View Quote I dig that sheath. Does that take a long time to make? |
|
Quoted: I dig that sheath. Does that take a long time to make? View Quote View All Quotes View All Quotes Quoted: Quoted: https://i.imgur.com/D21qPtj.jpg https://i.imgur.com/uVkCSyU.jpg ESEE 4 in a custom sheath I made. Great knife. I dig that sheath. Does that take a long time to make? Thanks. I think it turned out pretty good for no more experience than I have making sheaths and holsters. Kind of picked the hobby up during the pandemic while slowly putting a bug out bag together at the same time. Head scratching, laying out the design, and tooling the leather takes the longest. Cutting, dyeing, and stitching it goes pretty quick. I'd say a solid 8-10 hrs went into it being a total novice. Next up, holster for a suppressed Buckmark with a red dot. |
|
Quoted: Thanks. I think it turned out pretty good for no more experience than I have making sheaths and holsters. Kind of picked the hobby up during the pandemic while slowly putting a bug out bag together at the same time. Head scratching, laying out the design, and tooling the leather takes the longest. Cutting, dyeing, and stitching it goes pretty quick. I'd say a solid 8-10 hrs went into it being a total novice. Next up, holster for a suppressed Buckmark with a red dot. View Quote Not to bad. That’s damn cool. I need to pick up a hobby like this. |
|
My woods knife that I just about always take with me is my Tops Silent hero.
Similar in size to an esee 6 it's just at the point where it is large enough for most tasks but is still somewhat handy. Any larger and I would find it to be cumbersome, but it's not a across that line for me. Still need to get a decent kydex sheath made for it, but the leather has held up well so far. Attached File |
|
|
View Quote Niiiccee! Impressive. Most impressive. But you are not a Jedi knight yet..... |
|
|
Quoted: [snip] My favorite fixed blade....a Cold Steel ODA that I rehandled, since i will never spend $$$ on a Randall 1-7 https://www.ar15.com/media/mediaFiles/2604/20191117_153719-1190825.jpg [snip] View Quote View Quote |
|
Quoted: Little Independence Day project. Removed the coating from the blade: https://live.staticflickr.com/65535/50079932838_201fffe680_b.jpg Then dipped the exposed metal only in hot apple cider vinegar: https://live.staticflickr.com/65535/50079933473_e38d6e110c_b.jpg View Quote Not being a wiseass.... Why would you do this? Again, I’m asking because I genuinely want to know. |
|
People do that for a forced patina. Less coating on the blade from epoxy or paint causes less drag in a slice. That is not the only reason. The other is to allow the bare metal to be sparked for fire starting and scraping with the spine of the blade. Scraping is useful for sparking a ferro rod and also nice for shaping wood, making tinder, removing bark. Some people also like the look.
|
|
Quoted: Not being a wiseass.... Why would you do this? Again, I’m asking because I genuinely want to know. View Quote Along with what Kskvetski mentioned, some like to use an uncoated blade if doing a lot of food prep as well. Coatings are fine and they work, but there's no disadvantage of taking the coating off and either getting a natural patina or a forced one. Regular use and a little maintenance removes any concerns about rust. ROCK6 |
|
Ahhh thanks guys, just picked up an esee 3, and it’s my first 1095 blade. Sounds like something I should plan to do, especially since I planned to have a ferro rod along side it. Didn’t realize it wouldn’t spark with the coating on it.
As it’s considered a bushcraft knife, I wonder why esee doesn’t offer the 1095 steel uncoated. |
|
Quoted: Ahhh thanks guys, just picked up an esee 3, and it’s my first 1095 blade. Sounds like something I should plan to do, especially since I planned to have a ferro rod along side it. Didn’t realize it wouldn’t spark with the coating on it. As it’s considered a bushcraft knife, I wonder why esee doesn’t offer the 1095 steel uncoated. View Quote I'm surprised as well. I do have one of their ESSE 3 440C stainless versions that is stone-washed. I really like it. Even being stone-washed "stainless" it's developed some patina. I would have zero issues removing the coating on a 1095 version. ROCK6 |
|
Quoted: I'm surprised as well. I do have one of their ESSE 3 440C stainless versions that is stone-washed. I really like it. Even being stone-washed "stainless" it's developed some patina. I would have zero issues removing the coating on a 1095 version. ROCK6 View Quote View All Quotes View All Quotes Quoted: Quoted: Ahhh thanks guys, just picked up an esee 3, and it's my first 1095 blade. Sounds like something I should plan to do, especially since I planned to have a ferro rod along side it. Didn't realize it wouldn't spark with the coating on it. As it's considered a bushcraft knife, I wonder why esee doesn't offer the 1095 steel uncoated. I'm surprised as well. I do have one of their ESSE 3 440C stainless versions that is stone-washed. I really like it. Even being stone-washed "stainless" it's developed some patina. I would have zero issues removing the coating on a 1095 version. ROCK6 |
|
|
View Quote Still have mine |
|
Quoted: Still have mine View Quote Truth be told, i actually do own such a blade, so it's not at all a troll post. Personally, I believe the Mora knives are a pretty good value. Better two good knives than one great knife. YMMV. |
|
Mora 511.
The only thing wrong with the Mora 511 is the sheath it comes with and I remedy that with a basic fold over Kydex sheath. |
|
|
Quoted: The only downside I've found to my 1095 EESE 3 is the need to make sure it's dry and oiled before I put it away. The uncoated portions of the blade will rust quickly if I don't. Even the areas where they have laser engraved their logo will get surface rust. View Quote So Esee now has S35vn, I have their Esee 3 in satin and that truly is premium super steel and you're not gonna rust that if you try. Also, if you apply Tuff-glide to your current 1095 blades, let it coat overnight, should really not be an issue either, if you do that once every year or so. |
|
I love my 3 and EDC it 90% of the time.
Attached File But for getting work done or if I could only have one knife, junglas. Attached File Attached File |
|
Quoted: Not being a wiseass.... Why would you do this? Again, I’m asking because I genuinely want to know. View Quote View All Quotes View All Quotes Quoted: Quoted: Little Independence Day project. Removed the coating from the blade: https://live.staticflickr.com/65535/50079932838_201fffe680_b.jpg Then dipped the exposed metal only in hot apple cider vinegar: https://live.staticflickr.com/65535/50079933473_e38d6e110c_b.jpg Not being a wiseass.... Why would you do this? Again, I’m asking because I genuinely want to know. Makes the blade smoother to baton with! Also before you go off stripping the coating and you want to preserve the logos and other etchings, you do a process with ferric chloride to give the logos a stamped look which I have been doing with my other blades: Attached File Attached File Attached File |
|
Quoted: So I have been trying to stay out of this thread because my "survival knife" is a little old school. Background: I was attached to a helicopter squadron in the late 80's early 90's. Back then no one at the squadron thought very highly of the issued survival knife so most people bought their own. One of the more popular choices was the Gerber BMF. The saw teeth on the back were intended for aircrew to cut aluminum in a pinch. Well I sold my BMF when I left the squadron but eventually replaced it. I wasn't a fan of the sheath that came with the BMF so I swapped it out with a black M9 sheath that I had laying around. The wire cutter serves no purpose with the BMF but I have used the notch to hang the sheath from a couple of times. The mag pouch on the M9 sheath is sometimes used to hold a small squirt bottle of mosquito repellent and sometimes a waterproof aluminum cylinder with hurricane matches, depending on the season. I put a compass in the lid of the aluminum cylinder also. I have looked at better sheaths but having those matches there has been so darn handy that I would hate to give that up. The compass has been used a couple of times as well but not for anything really mission critical. I cannot think of any time that North was determined with that compass where it couldn't have been determined by other means. It was just a convenience thing. There is also about 20 feet of parachute cord wound up and tucked along side of the sheath. It is held in place with a couple of elastic bands. The knife has held up well. Typically it is sharp enough to shave with and although I have tried, I have never mastered the ability to really sharpen a knife with the stone on the back of the sheath. It is nice knowing that I could put a bit of an edge back on the knife if I do serious damage to it but other than emergency repairs the built in stone will probably never be used. This knife can baton wood but with the taper on the back of the blade you do wear down the branch that you are batonning with fairly quickly. https://www.ar15.com/media/mediaFiles/415398/IMG_1022_-1537017.jpg https://www.ar15.com/media/mediaFiles/415398/IMG_1023_-1537018.jpg 2Hut8 View Quote Stout blade! What fire starter kit is that with the compass? |
|
|
Quoted: So I have been trying to stay out of this thread because my "survival knife" is a little old school. Background: I was attached to a helicopter squadron in the late 80's early 90's. Back then no one at the squadron thought very highly of the issued survival knife so most people bought their own. One of the more popular choices was the Gerber BMF. The saw teeth on the back were intended for aircrew to cut aluminum in a pinch. Well I sold my BMF when I left the squadron but eventually replaced it. I wasn't a fan of the sheath that came with the BMF so I swapped it out with a black M9 sheath that I had laying around. The wire cutter serves no purpose with the BMF but I have used the notch to hang the sheath from a couple of times. The mag pouch on the M9 sheath is sometimes used to hold a small squirt bottle of mosquito repellent and sometimes a waterproof aluminum cylinder with hurricane matches, depending on the season. I put a compass in the lid of the aluminum cylinder also. I have looked at better sheaths but having those matches there has been so darn handy that I would hate to give that up. The compass has been used a couple of times as well but not for anything really mission critical. I cannot think of any time that North was determined with that compass where it couldn't have been determined by other means. It was just a convenience thing. There is also about 20 feet of parachute cord wound up and tucked along side of the sheath. It is held in place with a couple of elastic bands. The knife has held up well. Typically it is sharp enough to shave with and although I have tried, I have never mastered the ability to really sharpen a knife with the stone on the back of the sheath. It is nice knowing that I could put a bit of an edge back on the knife if I do serious damage to it but other than emergency repairs the built in stone will probably never be used. This knife can baton wood but with the taper on the back of the blade you do wear down the branch that you are batonning with fairly quickly. https://www.ar15.com/media/mediaFiles/415398/IMG_1022_-1537017.jpg https://www.ar15.com/media/mediaFiles/415398/IMG_1023_-1537018.jpg 2Hut8 View Quote |
|
Attached File
Attached File Its great bc it is decent quality but still cheap. Great sheath that holds my multi-plier tool also. I plasti- dipped my handle as the "ooze- groove" scales are a little more aggresive than i need. |
|
I don’t have photos handy but mine are a variety. Most commonly a BK15 or old RC-4 (before ESEE), but also a BK7 and Cold Steel SRK on occasion.
|
|
Quoted: Nice. I haven't seen one of those since my Army days. A lot of our folks bought those and took them with to the sandbox. View Quote I assume that you are referring to Desert Shield and Desert Storm. I served in both of those operations. Yes, that is the era that these knives were popular. |
|
View Quote What grind is that in your 18? Very nice. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.