THE SUIT
Name: Ursus Mark VI
Development Time: Seven years
Total Cost: $150,000
Materials:
Fireproof rubber exterior (from Minnesota)
Titanium outer plates (from Hamilton, Ont.)
Suit joints made of chain mail (from France)
Tek plastic inner shell (from Japan)
Inner layer of air bags
Height: 2.18 metres (7 ft. 2 in.), with head-top camera attachment
Weight: 66.68 kilograms (147 lbs.)
Headpiece:
Two-chamber headpiece. Inner helmet: specially-modified Shoei motorcycle helmet. Outer chamber: aluminum/titanium alloy shell. Dimensions: approx. 60 centimetres (2 ft.) deep; 45 centimetres
(1 ft. 6 in.) wide.
Cooling System:
Battery-powered twin-fan ventilation system draws cool air into helmet and vents warm air.
Radio System:
Voice-activited two-way radio.
Viewing System:
Helmet-mounted miniature camera with wide-angle viewscreen.
Black Box:
Voice-activated recording device located on the rear-right side of head piece, to record bear sounds or, in the event of a catastrophic failure of the Ursus Mark VI, last words.
Defensive System:
Trigger finger-activated "blaster can" on right arm, capable of spraying a 38 centimetre (15 in.) diameter cone of bear repellant for a distance of 4.6 metres (15 ft.), for a duration of 7 seconds.
Testing On Suit:
Truck: 18 collisions with a three-tonne truck travelling at 50 kilometres an hour (30 m.p.h)
Rifle: Shot at with 12 gauge shotgun, using "Sabot" slugs
Arrows: Armour-piercing arrows, fired from 45 kilogram (100 lb.) bow
Tree Trunk: Two collisions with a 136 kilgram (300 lb.) tree from a height of 9 metres (30 ft.)
Bikers: Assault by three bikers -- the largest, 2.05 metres (6 ft. 9 in.) tall, weighing 175 kilograms (385 lbs.). Biker armaments: splitting ax, planks, baseball bat.
Escarpment: Jumped off escarpment, falling over 15.25 metres (over 150 ft.).
Bite Bar:
Pressure-sensitive strip located on right arm, to measure the biting power of a grizzly.