User Panel
We really need a meme image of Mike Holmes saying "Tear it all down".
Or to put it more gently, theres not really any ideal way to do that. |
|
a reducer?
Seriously, you can envision the piece that goes there...measure the 2 pipe openings, head to the hardware store, purchase part and PVC glue. |
|
If you know the size of the pipes home depot has the shit to do it. They make reducing connections just for that.
|
|
Install an adapter on either end to bring them closer together, then duct tape the different.
|
|
I would take that photo and some measurements (specifically the pipe sizes) to a decent hardware store, and ask for advice in person.
Tagged for amusement. |
|
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot.
1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 |
|
There's a "slip joint/coupler" that will fix that, go to home depot and get one.
The pipe on top fits through the coupler and it screws down on the threads on the lower piece. Search google images for "sink plumbing parts" to see picts. |
|
The threads just off the p-trap are going to mess you up! Get a new lower portion of the p-trap that does not have that male adapter on it. Then use a bushing(reducer) and glue onto your upper pipe.
|
|
Quoted:
I would take that photo and some measurements (specifically the pipe sizes) to a decent hardware store, and ask for advice in person. Tagged for amusement. All PVC sink drain is 1 1/2". All tails from the sink are 1 1/4" Showers/basins=2" |
|
Quoted:
The threads just off the p-trap are going to mess you up! Get a new lower portion of the p-trap that does not have that male adapter on it. Then use a bushing(reducer) and glue onto your upper pipe. Wrong |
|
Quoted:
My wife said the size of the pipe didn't matter. It's the motion in the ocean |
|
Quoted:
There's a "slip joint/coupler" that will fix that, go to home depot and get one. The pipe on top fits through the coupler and it screws down on the threads on the lower piece. Search google images for "sink plumbing parts" to see picts. Oh yeah, that's right ^. It's been years since I installed a sink. They sell those drain couplers in every hardware store in the faucet/sinks section. They even accomodate the sink drain plug pop-up mechanism. |
|
Quoted:
My wife said the size of the pipe didn't matter. My wife told me that I need a reducer. |
|
Quoted: You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. |
|
Quoted:
Quoted:
My wife said the size of the pipe didn't matter. My wife told me that I need a reducer. Stay married, the sex will reduce automatically |
|
Quoted: Quoted: My wife said the size of the pipe didn't matter. My wife told me that I need a reducer. Asshole to big? |
|
Just make sure they are lined up right, gravity will do the rest
|
|
1. Take measurements
2. Have a shop machine the piece out of billet aluminum 3. ????? 4. Profit!!!!!! |
|
No matter what you think is the right solution, it's always gonna mean at least two trips to the hardware store.
|
|
Quoted: No matter what you think is the right solution, it's always gonna mean at least two trips to the hardware store. Ain't that the truth. |
|
Quoted:
My wife said the size of the pipe didn't matter. RRRRIIIIIIIIIIIGHT! I suppose the size of you wallet dosen't matter either? |
|
A piece of Charlie Sheen's hair will infuse it with pure awesome and connect them in an unbreakable leak proof bond.
|
|
Quoted:
Quoted:
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. Are you new here? lol |
|
Quoted: Quoted: Quoted: You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. Are you new here? lol Lol. I think I just never paid much attention to his posting before. |
|
Quoted:
Quoted:
My wife said the size of the pipe didn't matter. RRRRIIIIIIIIIIIGHT! I suppose the size of you wallet dosen't matter either? She said, and I quote. " I don't care what size it is you ain't gettin any" |
|
Quoted:
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 |
|
Quoted:
Quoted:
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. The irony is, he's wrong. It's not a inch and a quarter fitting coming off of the drain in that photo. It's an inch and a half fitting, for a kitchen sink drain. The OP doesn't need a reducer. He needs an extension. |
|
This is an example of why the motto is "Army Strong" not "Army Smart."
|
|
They sell different sizes tail pieces. Or get another size trap. Yeah, reducer might be easier but my experience with plumbing is, it's never as easy as it looks and you never get everything you need in one trip.
|
|
Be careful that you don't pick up tubular sized fittings for this. Make sure you tell them that you have ABS, which is an IPS (iron pipe size) pipe. If you just tell the guy at HD or the hardware store you need 1-1/4 or 1-1/2 fittings for under your sink, they may just direct you to the tubular stuff.
|
|
Quoted:
Quoted:
Quoted:
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. The irony is, he's wrong. It's not a inch and a quarter fitting coming off of the drain in that photo. It's an inch and a half fitting, for a kitchen sink drain. The OP doesn't need a reducer. He needs an extension. Um, no. He needs a flange. You are wrong. This is basic, I mean basic fucking skills. I gave the answer, now dozens of you can flame me and come up with a new way to make the fucking wheel round. My 13 year old could do this. Fuck it. I gave the answer. Go buy extensions reducers JB weld, duct tape go for it. See the black piece pointing towards the trap????????????? That's 1 1/4" see the fucking "curvy" thing, that's called a trap they are ALL 1 1/2" post 1960's Sink drain used to be 1 1/4" it is now 1 1/2" showers are 2" But fuck it, you all go the way you want. |
|
Not to be a dick, but if you can't handle this simple task without posting pictures on the internet you probably shouldn't be tackling any plumbing projects in the first place.
|
|
Quoted: You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 flange must have a different meaning than what i've always been taught if you think it's the right fitting for that. |
|
Quoted:
Not to be a dick, but if you can't handle this simple task without posting pictures on the internet you probably shouldn't be tackling any plumbing projects in the first place. It's so simple it's maddening. |
|
Quoted: Quoted: Quoted: Quoted: You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. The irony is, he's wrong. It's not a inch and a quarter fitting coming off of the drain in that photo. It's an inch and a half fitting, for a kitchen sink drain. The OP doesn't need a reducer. He needs an extension. Um, no. He needs a flange. You are wrong. This is basic, I mean basic fucking skills. I gave the answer, now dozens of you can flame me and come up with a new way to make the fucking wheel round. My 13 year old could do this. Fuck it. I gave the answer. Go buy extensions reducers JB weld, duct tape go for it. See the black piece pointing towards the trap????????????? That's 1 1/4" see the fucking "curvy" thing, that's called a trap they are ALL 1 1/2" post 1960's Sink drain used to be 1 1/4" it is now 1 1/2" showers are 2" But fuck it, you all go the way you want. lol.. the butthurt is soooo obvious. |
|
Quoted:
My wife said the size of the pipe didn't matter. My wife , after hearing me read the title of the thread , said " Are you SERIOUS ??" |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
You simply need a flange for 1 1/4" pipe which is the drain on the sink and 1 1/2" pipe which is what it connects to at the trap. I have thousands, so does Home Depot. 1 1/4" & 1 1/2" flange. Ignore everything posted in this thread except what I said this is common and simple. Go to HD and explain your situation, the fix is like .25 A little arrogant, aren't you? A couple posters prior to you have already told him he needs a reducer. The irony is, he's wrong. It's not a inch and a quarter fitting coming off of the drain in that photo. It's an inch and a half fitting, for a kitchen sink drain. The OP doesn't need a reducer. He needs an extension. Um, no. He needs a flange. You are wrong. This is basic, I mean basic fucking skills. I gave the answer, now dozens of you can flame me and come up with a new way to make the fucking wheel round. My 13 year old could do this. Fuck it. I gave the answer. Go buy extensions reducers JB weld, duct tape go for it. See the black piece pointing towards the trap????????????? That's 1 1/4" see the fucking "curvy" thing, that's called a trap they are ALL 1 1/2" post 1960's Sink drain used to be 1 1/4" it is now 1 1/2" showers are 2" But fuck it, you all go the way you want. lol.. the butthurt is soooo obvious. You have nothing of value to contribute do you? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.