User Panel
Posted: 3/7/2017 1:19:08 AM EDT
Been kind of interested in adding a clean overdrive or a tubescreamer to the front end of my rig just to see how it sounds.
Anybody ever hand make a simple overdrive pedal at home? Figured it'd be a fun project that may save me a few bucks. |
|
Quoted:
Been kind of interested in adding a clean overdrive or a tubescreamer to the front end of my rig just to see how it sounds. Anybody ever hand make a simple overdrive pedal at home? Figured it'd be a fun project that may save me a few bucks. View Quote Nope but I have a boss metal zone I'm trying to get rid of. |
|
Not from scratch, but I have built a couple of pedal kits before. If you can solder, you can do it.
|
|
|
Mammoth stuff is top quality. It's run by one of Robert Keeleys first employees and he now distributes the keeley mod stuff.
If you just want a clean boost, these pedals are killer for the price. I use the comp and gold plexi on my board. https://www.riffcityguitaroutlet.com/pages/search-results?narrow=%5B%5B%22Vendor%22%2C%22Tone%20City%22%5D%5D&category_id=138399107&category_url=%2Fcollections%2Feffects&disable_semantics=1 I use the comp at the start of my chain to make my b9 sustain longer and I use the gold plexi set super low gain to add a bit of heat. They are extremely well made and come with Velcro that fits on the back. They weigh as much as s boss legal but more than half of the size. |
|
I haven't, but I've always read that a Zvex Super Hard-on (clean boost) clone is a very simple pedal to build.
|
|
I've built several distortion/gain circuits. Most of them are simple one transistor affairs but the one I like the most is an MXR clone here.
Antique Electronics Supply has several kits to choose from. |
|
I built my own dirt box and a tremolo from scratch. Dirt was loosely based on a TS-808 circuit, trem was based on the EA design with mods. Hand wired on perf board. Both sound great to me.
|
|
Yeah, I build simple pedals from time to time.
Clean Boost, using an op-amp, Unity Gain to 29dB boost. A distortion, two dual op-amps, with boost, and tone control. A loop switcher with true bypass or BJT Buffer. You can get a lot of DIY stomp-boxes from Mammoth (and many other places). I tend to design and prototype what I want. Currently re-modding a tube amp I built. Once done I think I am going to build a single channel, ultra clean 15-30 watt tube amp. |
|
So there's definitely some experience here. I think I'll probably follow one of the walkthroughs posted for the Super Hard On clone, looks simple as hell.
Any good books for breaking into this a bit more than just a guided walkthrough on the internet that anyone may recommend? Being able to conceptualize and design my own pedals, or even learn how to make different modifications to existing ones seems like a neat and useful hobby. |
|
Quoted:
How do they sound? Is at least decent enough to get an idea of what a production boost would do without having to go all in on a $100 pedal off the bat? View Quote Get this kit http://store.generalguitargadgets.com/kits/kits-distortion/its8-complete-kit.html and also purchase the modification options for $8. When you build it use the directions for the Expensive boutique modifications. At that point you will basically have a Landgraff Dynamic Overdrive that only cost $75 with shipping. It sounds killer. Landgraff Dynamic Overdrive Pedal |
|
Bought and built a TS-855 clone from Build your own clone
Fun little project learning to solder, and has some pretty easy instructions to follow. Kind of lacking in explaining what each component does, so I'm off to find that information elsewhere. Anyhow, put it between my guitar (which I also did an 18V mod to for giggles, because why not) and my amp. I can get a good old school rock tone out of just the pedal and the rhythm channel. Take those same settings on the amp and pedal, then hit the crunch switch on rhythm channel and it's a solid modern rock tone. Flip it over to the lead channel, and it's a lot less noticeable. I was kind of surprised by how understated it felt on that channel. It felt like it gave just a tiny bit of a boost, and tightened the low end up just a touch, but generally speaking it wasn't the "woah holy shit" change I was expecting. Then again, I guess I don't know exactly what I was expecting to get out of it for my metal tone. It tightened up the low end though, so that in itself is bueno. |
|
Congrats!
Did you try it with the distortion/gain turned all the way down and the volume knob turned up or cranked? That's how I run my ODs. I've found that works best for me. |
|
The "level" pot at max doesnt sound like its much of a boost, if any at all, to the signal.
It just sounds to me like its allowing the full signal through, as opposed to amplifying it like I'd expect it to. It came with an extra pair of diodes that I may try swapping out. Evidently they're a bit louder and less distorted than the germaniums. |
|
That's weird, I've never had an OD that didn't have some volume boost. Did you put any caps or diodes in backwards?
|
|
I could be mistaken but doesn't running at 18V increase the clean headroom? Maybe that is why you aren't getting what you are looking for.
|
|
Quoted:
I could be mistaken but doesn't running at 18V increase the clean headroom? Maybe that is why you aren't getting what you are looking for. View Quote View All Quotes View All Quotes Quoted:
I could be mistaken but doesn't running at 18V increase the clean headroom? Maybe that is why you aren't getting what you are looking for. Quoted:
That's weird, I've never had an OD that didn't have some volume boost. Did you put any caps or diodes in backwards? |
|
Quoted:
I could be mistaken but doesn't running at 18V increase the clean headroom? Maybe that is why you aren't getting what you are looking for. View Quote |
|
I'm a bassist, man, this guitar effects and lingo shit is new to me
I'll pop the pedal apart after work and go back over it. |
|
|
Changed diodes on that pedal, no real discernible difference in tone or volume level, but that could just be an ear that doesn't know what to listen to, or hearing damage. Dunno which
Found a schematic for the zvex super duper two in one. Question is... make the super duper or just the SHO? |
|
Quoted:
Changed diodes on that pedal, no real discernible difference in tone or volume level, but that could just be an ear that doesn't know what to listen to, or hearing damage. Dunno which Found a schematic for the zvex super duper two in one. Question is... make the super duper or just the SHO? View Quote 1- handwire using perfboard. 2- handwire using fiberboard and drilling for turrets. 3- Made own circuit board. 4- Bought circuit board. |
|
I'm thinking About making this item
The parts are cheap Easiest “modification” for Fender Hot Rod amps (and others) to make it better for home use |
|
Andy Timmons likes the Keeley mode on a boss OD-1. That is a mod u can diy.
|
|
So playing the pedal on a clean channel, I can definitely hear the boost in volume playing on my neck pickup at half volume.
Maybe it's just the nature of the amps lead-channel and the way it creates the distortion that it compresses that boost down a bit and makes it less noticeable? Hell I don't know, I'm spitballing. |
|
Quoted:
So playing the pedal on a clean channel, I can definitely hear the boost in volume playing on my neck pickup at half volume. Maybe it's just the nature of the amps lead-channel and the way it creates the distortion that it compresses that boost down a bit and makes it less noticeable? Hell I don't know, I'm spitballing. View Quote |
|
I've ran it without any drive from the pedal to 12 o'clock on the preamp distortion, and it doesn't do too much to my uneducated ears.
I run it usually now with about a quarter drive on the pedal to the same preamp setting of 12 o'clock. It seems to thicken it up just a touch. |
|
Quoted:
I've ran it without any drive from the pedal to 12 o'clock on the preamp distortion, and it doesn't do too much to my uneducated ears. I run it usually now with about a quarter drive on the pedal to the same preamp setting of 12 o'clock. It seems to thicken it up just a touch. View Quote If you're talking about the volume on the pedal, crank that son of a bitch. Then just leave the distortion knob on the pedal all the way down and set the pedal's tone knob somewhere between 10 & 2. Overdrives are made to slam the front end of an amp while adding a little flavor of it's own. And don't worry about hurting your amp, because you won't. Also, Tube Screamer type pedals are known for tightening up the bottom end while pumping up the mids. So you may notice less bass when the pedal is on. |
|
Quoted:
"Preamp"? As in the gain knob on your amp, or are you talking about the volume knob on the pedal? If you're talking about the volume on the pedal, crank that son of a bitch. Then just leave the distortion knob on the pedal all the way down and set the pedal's tone knob somewhere between 10 & 2. Overdrives are made to slam the front end of an amp while adding a little flavor of it's own. And don't worry about hurting your amp, because you won't. Also, Tube Screamer type pedals are known for tightening up the bottom end while pumping up the mids. So you may notice less bass when the pedal is on. View Quote I by "preamp" I meant the knob on my amp that controls the distortion, that's just what it's labeled as is all. |
|
Quoted:
I did notice a touch of a drop in bass tone with the pedal on, which really isn't a big issue for me. I by "preamp" I meant the knob on my amp that controls the distortion, that's just what it's labeled as is all. View Quote |
|
I've built a couple dozen. Can't say enough good things about GuitarPCB or their kit distributer Pedal Parts and Kits
I've also used General Guitar Gadgets And Madbean's boards he's got great resources for more makers too. I've bought pcbs from hobbyists on FB and made some really great pedals out of them too. Haven't yet ventured into making my own boards or designing my own circuits. Right now this is just a really nice escape for me. It's like meditation- I can just go to my workbench after the family is asleep and solder a project for an hour. Drill out the enclosure, paint it, test it etc. all at my own pace. I have a few friends who want to buy some of my work, and I might do that down the road. Anyhow I'm happy to help out here if I can. |
|
So finally finished my SHO clone.
First one had all fucked up wiring. Wrong pinout on the transistor and pot due to my lack of paying attention and checking online for the proper pinout. Anyhow, I plopped that down after the TS-885 clone I had built earlier, and with the SHO at about half way, it helps the TS-885 do more of what I wanted it to do while adding a little bit of top end sparkle and life to the tone. |
|
Quoted:
Been kind of interested in adding a clean overdrive or a tubescreamer to the front end of my rig just to see how it sounds. Anybody ever hand make a simple overdrive pedal at home? Figured it'd be a fun project that may save me a few bucks. View Quote There are enough boutique pedal manufacturers if you aren't happy with the big name/popular pedals to buy from without having to reinvent the wheel. |
|
Quoted:
So finally finished my SHO clone. First one had all fucked up wiring. Wrong pinout on the transistor and pot due to my lack of paying attention and checking online for the proper pinout. Anyhow, I plopped that down after the TS-885 clone I had built earlier, and with the SHO at about half way, it helps the TS-885 do more of what I wanted it to do while adding a little bit of top end sparkle and life to the tone. View Quote |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.