Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/5/2006 2:26:31 PM EDT
I got a romanian folder today and I'm trying to remove the stock on my wasr. How do I get it off without damaging it? This sucker is tight man.
Link Posted: 1/5/2006 3:37:55 PM EDT
UM....if you take the bolt assy. out there should be a round area in the rear trunion that you can pry against the stock and trunion with a screwdriver and get it started..good-luck.
Link Posted: 1/5/2006 4:26:51 PM EDT
[Last Edit: 1/5/2006 4:26:59 PM EDT by walrus]
rubber mallet and a piece of wood. hammer and butt end of screwdriver. etc.
Link Posted: 1/9/2006 6:41:08 AM EDT

rubber mallet and a piece of wood. hammer and butt end of screwdriver. etc.


+1
Link Posted: 1/10/2006 12:49:19 PM EDT
Laundry bag full of dirty laundry or bed work the best for me.

Unload / Disassemble gun.
Remove 2 screws.

Grasp gun by barrel.
Using an over the head chopping swing, beat all 4 sides of butstock on bed / dirty laundry bag.
Repeat beating till the stock wiggles off.

You should hear a good slapping sound if you are doing it right.

Don't let the wife / boy / girlfriend catch you beating the bed.
Link Posted: 1/10/2006 8:24:53 PM EDT
I beat it out with a mallet and brass drift. I broke it but I threw it away anyways, dont need it when you have a good wire folder installed.
Link Posted: 1/11/2006 7:42:54 AM EDT
no reason to waste good wood.

drop's method works as does the hammer and a socket extension method.
tap it out slowly and you'll have really nice wood you can refinish.
Top Top