Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/4/2006 6:11:31 AM EDT
[Last Edit: 3/4/2006 6:16:50 AM EDT by spartan28]
Guys , I know this has been brought up before. What is the best way to rid of surface rust? I have a little starting on the gas tube where it slides into rear sight block.
Link Posted: 3/4/2006 6:38:03 AM EDT
0000 or 000 steel wool with oil...then retouch up with brownells touch up blue or if paint ...then paint....
Link Posted: 3/4/2006 7:13:54 AM EDT
Link Posted: 3/4/2006 8:31:05 AM EDT
Soak hell out of it with CLP for a day or so. It'll wipe off.

Link Posted: 3/4/2006 1:53:13 PM EDT
Kroil and 0000 steel wool or
you can use a nickel, or so I've read, it's softer and won't scratch the steel.
Link Posted: 3/5/2006 6:14:28 AM EDT
[Last Edit: 3/5/2006 6:15:23 AM EDT by sacmaster]
I used a brass brush with CLP to remove rust on the SG mag deal, worked great. Do you think fine steel wool is better at removing rust and not the bluing (not talking about paint)?
Link Posted: 3/5/2006 6:51:28 AM EDT
here ya go guys:

Link Posted: 3/5/2006 7:02:07 AM EDT
Top Top