AK Sponsor
Posted: 9/22/2005 9:29:33 PM EDT
|
Just got my first build done, a Romy kit from Centerfire. The kit was in awesome shape compared to a Tantal and an AMD I also got in to build. Used a Ewbanks receiver and it turned out pretty good. Had to file the on it in a couple of places but over all it went together pretty easy. I used the screw method but will probably try the next one with rivets. 10 rounds down range and no problems. So took it back apart and painted it. I'll post pics as soon as the DuraCoat dries! Thanks for all the help guys. I wouldn't have even tried this if it hadn't been for this site!! http://www.hunt101.com/img/327206.jpg http://www.hunt101.com/img/327207.jpg |
while you are at it, you might as well strip it down, degrease, and (if oyu haven't already)red locktite then reasemble, then paint.  right?cheap spray on (squirt bottel) degreaser works pretty good, and you can nuetralize any spills or skin contact using vinegar) but don't put vinegar on your gun, it combines with the base to form salt. Grill and oven cleaner "off" f yellow can, works REALLY good, it removes blueing too, if left on there. IT will also strip off AMD paint, if left on for a few hours. But it does form a slight surface dusting of corrosion on the metal (as it eats the metal) nothing a cheap wire brush on a drill press won't clean up. And wear gloves, so you don't get oils from your hands on the gun before oyu paint. DOn't do like me, and forget to degrease the barrel too...  Congradulations on your first build.  What kind of paint were you going to use? |
Air brush I got from Lauer when I ordered the DuraCoat. It worked great except for the air can freezing up. Next time I'll hook my air compressor up to it. http://www.lauerweaponry.com/index.cfm?Category=600&Subcat=Airbrush%20Kits |
|
When my followers and floor plates come in, the original grip goes back on and I'm putting an AMD break on it. Using the saw grip on an AMD pistol with the slant break from the Romy. Think they will both look pretty cool! Just got my barrell out of the AMD and am waiting on my GT receiver, they shut down for a few days due to Rita but are opening back up this week on Wed. Can't wait to get that receiver in so I can get that AMD pistol put together. And another, and another, and another, dang 18BSOTTM was right!!! |
Screw build. Went together pretty easy. No broken taps in this one, but I was going to screw together an AMD pistol night before last and broke a tap. Made a mess trying to get it out. I now have broken tap removers on order!!! Got the barrel out and now its gonna be rivets in the AMD. Next project is to make those mods on a bolt cutter. This is addicting! 
|
AK Sponsor