AR Sponsor
Posted: 10/3/2007 11:27:18 AM EDT
|
Greetings All, Anvil Arms is pleased to formerly announce the "Group Buy Custom Laser Engraved Lower Receiver Program" The program can be explained best by the following which is basicially part of an emial conversation we recently had. QUESTION: I have a group that wants to do a “Group Buy” of Anvil Arms AA15 lower receivers and have our custom logo laser engraved on the right side of the magazine well. We also might want to have each receiver customized with the owners name or other wording they choose. ANSWER: We do a lot of the custom type orders as you mentioned above. We just did one that is currently being talked about here on ARFCOM. The order was about 55 units, 1 standard logo with most of them having personalization on them. Here is a link to that thread if you would like to review it: ARFCOM Gulf States order thread Information on the laser engraving can be found on this page: Laser engraving Q/A Lots of samples of our work on this page: Lots of engraved gun pictures For your logo, if you design (or have it designed) and the file meets the requirements as noted on the page in the link above, then the complexity of the image has no bearing on the price. If you have us design the art the price for the art only, not the engraving, is as noted on the laser Q/A page. The actual engraving remains at no charge. For orders of this type we always use consecutive serial numbers and when one individual gets more than one unit we always try to give him consecutive numbers in the series. We usually try to start the set either on a "0" or "1" ending number. As far as pricing goes, Lower receiver $100 each. NO CHARGE for the one main magazine well laser engraving. Lower receiver with lower parts kit installed is $175 Lower receiver with LPK and 6 position stock is $250 Shipping all (5 or more) to the same FFL in one shipment. Shipping at $3.00 per. (add an additional $2 if lower has a 6 POS stock) Custom name or other line of text $5.00 Registered and marked "Registered Pistol" $5.00 Dealer pricing would not be applicable to an order such as this. We would be most pleased to work with your group to provide the products as you have described above. One last thing, PLEASE use my direct email (link below) instead of the ARFCOM mail, as it is MUCH better for us. -- THANKS Jon Kruger President, Anvil Arms LLC Lakeland, FL. Proud ARFCOM Industry Partner Lifetime NRA Member 863-398-4460 [email protected] www.AnvilArms.com |
Thanks for the questions guys. The Gulf States run is a done deal. The post was to advise of what is possible for us to do and the Gulf States reference was an example only. As far as minimum order goes, that would be a quantity of ONE. If you check the link provided above for the info on the laser engraving it gives you all the details on who, what, where, why and how to go about getting it done. Thanks again, Jon K. |
We only have about 35,000 military logos.  There is a very good chance we have what your looking for, or something very close to it. If you can send me some sort of sample to look at I can see what we have. I'll also need the pertinent info about unit ID and so forth. Please use the link below to send me email and samples directly. Thanks in advance! Jon K Anvil Arms LLC [email protected] |
AR Sponsor