BAD ASS Photos (Page 1 of 17)
Posted: 1/21/2011 6:48:07 AM EDT
 |
Stickman's pic 
We can't wait to get our Cerakoted selectors back from Ernie Bray, in OD, FDE and gun metal gray 
|
|
I'll be doing a comparison post soon, with better pictures hopefully 
|
|
In case you guys haven't seen thess pictures, the AXTS forged receiver and billet, fully ambidextrous receivers are both compatible with the 45 degree selector. They will have the Fire (pictogram) engraving situated in a manner that will work with both the 45 and 90 degree selector.
AXTS forged receiver (picture courtesy of Rainier Arms) 
AXTS billet, fully ambidextrous receiver, photographer unknown (high res pictures to come) 
These pictures are of prototypes. Production models will have Fire engravings that are compatible with 45 and 90 degree selectors
|
Xcoastie, how about this   Matching FDE levers |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
Originally Posted By Duffy:
Xcoastie, how about this
http://i75.photobucket.com/albums/i314/Duffypoo/FED1.jpg Matching FDE levers Sure send it on over. Lower and all.
The FDE levers are on my list. |
Uncle
Sams
Confused
Group
Sams
Confused
Group
|
We're sending more levers to Ernie Bray to get coated, this time it will include some foliage green too |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
Originally Posted By Duffy:
In case you guys haven't seen thess pictures, the AXTS forged receiver and billet, fully ambidextrous receivers are both compatible with the 45 degree selector. They will have the Fire (pictogram) engraving situated in a manner that will work with both the 45 and 90 degree selector. AXTS forged receiver (picture courtesy of Rainier Arms) http://i75.photobucket.com/albums/i314/Duffypoo/ADAC45degreereceiver.jpg AXTS billet, fully ambidextrous receiver, photographer unknown (high res pictures to come) http://i75.photobucket.com/albums/i314/Duffypoo/AXTXbilletfullambireceiver.jpg http://i75.photobucket.com/albums/i314/Duffypoo/AXTXbilletfullambireceiverleft.jpg These pictures are of prototypes. Production models will have Fire engravings that are compatible with 45 and 90 degree selectors That billet lower looks incredible! |
"When you die, if you get a choice between going to Regular Heaven or Pie Heaven, choose Pie Heaven. It might be a trick, but if not…mmmmm, boy!" -Jack Handey, Deep Thoughts
|
There will be another billet receiver that's 45/90 degree compatible, some of the AR15.com members have already seen it, but we were asked to keep it down low until the manufacturer is ready to release the news to the public. These lowers won't just be announced, they'll be AVAILABLE! |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
Nice pics Q! |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
What kind of lower is that? Has it been refinished? The rollmarks look... off. They look more like engravings. Can you show us more of the lower? 
ETA: Don't mean to stomp- just got my BAD-ASS yesterday and installed it, wish I had pictures to share! Standard 90 degree throw, full size left side, short thin right side, and in true "Duffy style" Kryloned to match the rest of my receiver immediately!
Will definitely be grabbing a few more for my other rifles, and once I've got a digital camera again I'll definitely post some pictures up of it, between the BAD-ASS and IWC 2-1 Point Tri-Glides I got, I think my M4 is damn near in my "perfect" configuration! I know it says Colt... but the rollmark on the magwell would imply that it's "U.S. Property" marked, I know there's a few transferable A1s out there with property marks, but exceedingly few A2s, which this lower appears to be. Also, the sear pin... just doesn't look right. ~Augee |
|
It says it's a Colt, it has the auto sear hole but the Auto marking is masked by the selector. Which is kind of strange, the selector on it is a semi auto 90 degree |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
That makes sense, I kept thinking I had not seen the sear pin stick out like that before They are nice pics, how do you keep the rifle so clean? |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
We're busy beavers these days, we're working on the 6th lever, CASS-3P in semi auto, and other prototypes |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL discount, please email me at:
[email protected]
|
Stick
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
|
Ah the AXTS 45/90 degree compatible receiver!
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
Very nice 
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
Thanks! 
When CASS-3P, SA (semi auto) comes out, it'll have a shot at that title. Though the CASS-3P family doesn't have as many lever options as the current semi auto 45 and 90 degree selectors, so it may retain the best selector crown for a little longer 
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
I don't have that many on my rifles
Well actually there are a few, mostly prototypes
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
Originally Posted By Duffy:
I don't have that many on my rifles
Well actually there are a few, mostly prototypes I have seven sets of your fine product |
"The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
Joe
NRA Life Member
Iowa
Joe
NRA Life Member
Iowa
|
Make sure you hit me for the new patches when they come out
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
Stick
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
[email protected]
www.rainierarms.com
(253) 218-2999 Office
(253) 218-2998 FAX
www.weaponevolution.com
http://www.flickr.com/photos/stickgunner
|
Thank you! Glad you were able to get the screw out
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
Originally Posted By Duffy:
Thank you! Glad you were able to get the screw out Patience sometimes works in my favor.
ETA: Just not as often as I would like.... 
|
Shit has to be put to bed so butts can heal and move on to the next bullshit topic. This use to be a GUN forum. Now it's a freaking purse fight gone nation wide.-RABIDFOX50
READ MORE, POST LESS....
READ MORE, POST LESS....
|
Nice set up, it looks....too clean
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
Originally Posted By Duffy:
Nice set up, it looks....too clean That will be fixed shortly. 
|
Shit has to be put to bed so butts can heal and move on to the next bullshit topic. This use to be a GUN forum. Now it's a freaking purse fight gone nation wide.-RABIDFOX50
READ MORE, POST LESS....
READ MORE, POST LESS....
|
The only rifle I have that's clean is the one I have to keep to shoot product pictures with
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
| Does the short rigiht side piece interfere with a knuckle if you use a high hold? The only ambi selector I've had success with so far is the Colt. |
"In his mind he was commanding troops; he had the right to interfere and this he believed to constitute command." Hemingway
|
With the 90 degree, all the levers will, though the short-thin lever has the least interference, but then it's tiny and not as easy to use. So then it is the extent of interference we're trying to decrease and mitigate, but not eliminate, with a 90 degree legacy selector arrangement, this is a design constraint.
With a 45 degree selector, even a short lever will still come in contact with the trigger finger in a high hold. This should be considered acceptable, HK burst pack on the roller locked systems and G36 all share the same traits. On an HK burst pack, when the selector is set to auto, the tip of the lever comes in contact with the trigger finger. The only solution is to reverse the orientation of the lever, the picture below shows a 45 degree selector with the levers reversed: 
Safe still places the lever parallel to the bore, though it now looks like an M16 set on Burst or Auto. Fire points the lever UP, there's nothing to interfere with the trigger finger. This can work if your receiver doesn't have selector stops. With a 90 degree selector, reversing the levers orientation doesn't work as well, as illustrated below: 
It still completely eliminates any interference, but the throw is simply too long to be intuitive, just as the 90 degree legacy selector arrangement is too long and not intuitive. |
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
You can use the standard lever on both sides of the receiver to give you maximum surface area and purchase, as no matter how big the lever is, it won't come anywhere near your fingers
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
Very nice, I'm going to get Centurion Arms rail to play with soon
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
|
I like your taste Augee
I've talked to Monty couple of times, we're still working on an IAR selector for him
|
Battle Arms Development
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]
http://battlearmsdevelopment.com
For LE/MIL, and firefighter discount, please email me at:
[email protected]